| Age | Commit message (Collapse) | Author |
|---|
|
* Loading files saved with 2.5 works again now without crashing. Was crashing when trying to load Grease Pencil data (even though there was none)
* Fixed some msvc compiler warnings in own code
|
|
Time-Modifying F-Curve Modifiers now get special callbacks to allow them to specify what frame they need to be evaluated on, instead of forcing a re-evaluation of the preceeding curve + modifier-stack. This should be more robust than the old way in general.
It still remains to be seen if some tweaks to this are still needed, as the full consequences of the propogation of modified time-spaces have yet to be fully explored.
For now though, evaluation works by finding the last modifier on the stack which modifies time, and asks it what time it modifies the given time to. This modified time is used to evaluate the F-Curve data only. The modifier stack gets evaluated using the original time instead.
|
|
Bugfix, thanks to report from M Fox: Saving file in editmode
could crash on load, because editobject pointer in scene was
not cleared on file reading.
|
|
Fix repeat crash with transform. Just remove stupid twmat, don't need to cache results in view3d.
Made it more safe too.
|
|
Summary of ain features:
- Themes and Styles are now editable.
- CTRL+U "Save user defaults" now goes to new .B25.blend, so you
can use 2.4x and 2.5x next to each other. If B25 doesn't exist, it
reads the regular .B.blend
- Press Tkey in 3d window for (unfinished) toolbar WIP. It now only
shows the last operator, if appropriate.
Nkey properties moved to the other side.
A lot of work was done on removing old themes for good and properly
getting it work with the 2.5 region system. Here's some notes;
- Buttons now all have a complete set of colors, based on button classifications
(See outliner -> user prefs -> Interface
- Theme colors have been extended with basic colors for region types.
Currently colors are defined for Window, Header, List/Channels and
for Button/Tool views.
The screen manager handles this btw, so a TH_BACK will always pick the
right backdrop color.
- Menu backdrops are in in Button theme colors. Floating Panels will be in
the per-space type Themes.
- Styles were added in RNA too, but only for the font settings now.
Only Panel font, widget font and widget-label work now. The 'group label'
will be for templates mostly.
Style settings will be expanded with spacing defaults, label conventions,
etc.
- Label text colors are stored in per-space Theme too, to make sure they fit.
Same goes for Panel title color.
Note that 'shadow' for fonts can conflict with text colors; shadow color is
currently stored in Style... shadow code needs a bit of work still.
|
|
-r19323:HEAD
Notes:
* blenderbuttons and ICON_SNAP_PEEL_OBJECT were not merged.
|
|
Patch from Joshua, converting Grease Pencil to 2.5.
All GP data now is an ID block, allowing re-use, link and append.
For better contextual control within 2.5, these GP ID's will get
linked to actual data, like NodeTrees, Scenes, Images or Objects.
That will ensure Undo works, and opens up exciting new use cases
as well. :)
Patch note: on reading files, GPencils linked from editors will
get moved to the main library, using standard naming (indicating
where it was used), and with "Fake User" set. That way the user
can manually relink the pencils where appropriate.
We can check on just linking GP to some default, like 3d window
pencils to Scene? Nice to experiment with.
Notes for Joshua:
- for reading old GPencil, it has to use old code as well, meaning
to tread data as "indirect data, within another ID".
- Saving ID data means the chunk in file BHead needs the ID_GD code,
and not "DATA", which indicates 'indirect data'. That's the file
format spec.
- I've added do_versions_gpencil_2_50(), feel free to further tweak
things here, like linking things to scene or so.
- Formerly GPencil saved 2.50 files won't convert gpencil
|
|
* Forgot to finish this code yesterday, dragging panels was
broken. This is fixed and new panels are now inserted after
the last added one, inbetween others rather than at the end.
|
|
* For new buttons spaces, automatically set horizontal/vertical
align depending on size, instead of free.
* Cleaned up the UI panel API. There's now a new uiBeginPanel
function which takes a panel type, and a uiEndPanel which takes
the final size. uiNewPanel* functions will be phased out.
* Animate the re-alignment when a panel size changes, e.g. when
enabling dupliframes.
* Load ui scripts from the release/ folder first if it is
available. This makes it easier to edit ui scripts, since it
will directly use the original files which avoids having to
run the build system.
* Improve editing of panel types while blender is open. That
means fixing some issues with lacking updates, overlaps, strange
ordering. It even does an animation now when the panel resizes.
|
|
Drivers now support multiple targets which act as 'variables'. The targets have a short 'name' (see later), and reference some property (in much the same way as F-Curves do, using RNA-Paths) which acts as the 'value'.
These named variables can then be used in a Python Expression which relates them to each other for more fine-grained control over the result of the driver. By using only the names of these variables in the expressions, we are able to define expressions/relationships in a much more readable way, as data access is separated from data use. This makes the underlying relationships easier to understand.
By default, if no Python Expression is given, the variables are simply averaged together, so old files won't break. :)
For example, check the following diagram (thanks Cessen/Nathan V from Peach team):
http://download.blender.org/ftp/incoming/250_drivers_mockup_cessen.png
TODO List:
* Depsgraph building for new driver relationships doesn't work yet. This needs to be recoded again, but this new system makes this much easier, since the targets are clearly defined (i.e. no need to parse py expressions to get list of objects)
* Graph Editor interface for editing these needs to be rewritten
* Python function for evaluating these expressions is needed (Campbell?)
|
|
Styles/fonts will be saved in userdef, but not yet... forgot to
zero pointers on read, causing crash on .B.blend read saved in 2.5
|
|
* Added very basic loading of .py files on startup to define panels.
It now executes all .py files in .blender/ui on startup. Right now
this contains the object buttons, the C code for it is commented out.
These files should get embedded in the blender executable as well
eventually, that's a bit more complicated so this works for now.
* For scons and cmake it seems to copy & find the files OK, for make
only "make release" works (same with scripts/ folder it seems).
* Added BLI_gethome_folder function in BLI_util.h. This is adapted
from bpy_gethome, and gives the path to a folder in .blender like
scripts or ui.
There's plenty of things to figure out here about paths, embedding,
caching, user configs ...
|
|
This feature takes a 'snapshot' of the visible+selected F-Curves, and displays these in the background as 'ghosts curves' in the background. Such curves are drawn semi-transparent, slightly darker, and with dotted lines.
To use, simply click the 'curve' button beside the Auto-Snapping selector. To clear, simply click that button again (with a different icon now).
These 'ghost curves' are stored per Graph Editor instance, and are not saved to file (i.e. per session only). They are useful to be used as guides when refining the shape of existing curves.
|
|
Bugfix.
File window uses new layout pointer, but doesnt set it to zero here,
giving memory issues on 2.5 file reading.
|
|
this can be brought back as a new space if someone decides to
work on it.
This also fixes remaining issues with the outliner tree open
and close buttons not working sometimes.
|
|
Got the basic envelope modifier code working, including primitive drawing of relevant helper info in the graph view. It doesn't work in a very intuitive way yet, so I will recode it soon.
|
|
-r18677:19317
Notes:
* Sequence transform strip uses G.scene global, this is commented
out now, should be fixed.
* Etch-a-ton code was most difficult to merge. The files already in
2.5 got merged, but no new files were added. Calls to these files
are commented out with "XXX etch-a-ton". editarmature.c and
transform_snap.c were complex to merge. Martin, please check?
* Game engine compiles and links again here for scons/make/cmake
(player still fails to link).
|
|
Slightly out of date documentation in wiki, I'll be updating that tomorrow.
http://wiki.blender.org/index.php/User:Theeth/etch-a-ton
|
|
* Rewrote the Generator modifier to be more efficient and support more options
* A few UI tweaks for this, but the UI for this is still not yet functional though.
|
|
* As a test, used by:
* Object buttons, tried to make it match the mockup.
* Text window header.
* Text window properties panel.
* Panel interaction with view2d is still problematic, need to make
this work properly still.
* Templates are very basic, the ones there are simple but already
can follow the object buttons mockup quite closely.
* It's based on a three level system: panels, templates and items.
To get an idea of what that means in practice, see:
http://wiki.blender.org/index.php/BlenderDev/Blender2.5/UI_LayoutEngine#Panels.2C_Templates_and_Items
|
|
There was very little structure in this code, using many globals
and duplicated code. Now it should be better structured. Most
things should work, the main parts that are not back yet are the
python plugins and markers. Notes:
* Blenfont is used for drawing the text, nicely anti-aliased.
* A monospace truetype font was added, since that is needed for
the text editor. It's Bitstream Vera Sans Mono. This is the
default gnome terminal font, but it doesn't fit entirely well
with the other font I think, can be changed easily of course.
* Clipboard copy/cut/paste now always uses the system clipboard,
the code for the own cut buffer was removed.
* The interface buttons should support copy/cut/paste again now
as well.
* WM_clipboard_text_get/WM_clipboard_text_set were added to the
windowmanager code.
* Find panel is now a kind of second header, instead of a panel.
This needs especially a way to start editing the text field
immediately on open still.
* Operators are independent of the actual space when possible,
was a bit of puzzling but got it solved nice with notifiers,
and some lazy init for syntax highlight in the drawing code.
* RNA was created for the text editor space and used for buttons.
* Operators:
* New, Open, Reload, Save, Save As, Make Internal
* Run Script, Refresh Pyconstraints
* Copy, Cut, Paste
* Convert Whitespace, Uncomment, Comment, Indent, Unindent
* Line Break, Insert
* Next Marker, Previous Marker, Clear All Markers, Mark All
* Select Line, Select All
* Jump, Move, Move Select, Delete, Toggle Overwrite
* Scroll, Scroll Bar, Set Cursor, Line Number
* Find and Replace, Find, Replace, Find Set Selected,
Replace Set Selected
* To 3D Object
* Resolve Conflict
|
|
editing, paint cursor, radial control, mouse/border/circle/lasso
select, mirroring, bad level calls fixed, etc.
|
|
|
|
* bugfix: for older files, initialize the brush curve on file load
|
|
Animsys bugfix: files didn't read or write all supported animdata
structs yet (key was missing for read, crashing). Now it supports
all 10 implemented ID types:
OB CU KE MA TE NT LA CA WO SCE
|
|
Assorted smaller fixes:
- Fix: modal keymaps for editmode in view3d were not set again
when you copy areas or go fullscreen.
- Improved "redo last op" (F6) to search back in history for
a redoable operator. Operator also used wrong pupmenu type.
- On creating new FCurve editor, the channel rainbow colors are
set correct.
- EditMesh: fixed code for Spin/Screw, correct props, init and
error reporting. (Spin hotkey ALT+R temporary)
- recompiled all to check for uninitialized variable warnings.
(compile flag should be -O for this). Fixed some proto's.
|
|
self.
|
|
|
|
- Localview in 3d window back.
Note: it puts entire area on localview, so it works nice for
4-split views as well.
- Added 'save over' menu in filewindow F2 operator. Mostly to
comply to 2.48... such things can be on the review list.
|
|
When fully implemented, these will be the clearest demonstration of 'Everything is Animateable', as they will allow users to define an arbitary group of settings through selecting items in the Datablocks (RNA-Viewer) View of the Outliner to define custom 'sets'. Such Keying Sets are known as the 'absolute' ones, which are created for a custom purpose.
Of course, 'builtin' Keying Sets will still be provided. Such built-in ones will not work on any particular paths, but will use context info to maintain the legacy method of inserting keyframes (via IKEY menu).
Currently, KeyingSets cannot be created/edited through the UI, though the backend code is in place to do this.
|
|
When inserting keyframes on previous un-animated Objects/bones, F-Curves will be added into Action Groups into either "Object Transform" or <PoseChannel Name>. Ob->Material settings are not grouped for now to illustrate what's possible.
Old files are currently not patched to use do this, as it's still not clear whether this will be ideal.
|
|
- Screen browse button back
- Several fixes in using screens in more windows.
Still has loose ends, but things are definitely more stable!
|
|
Safe method to move render results to the displayed image.
It now allocates a single image for display, and on each
refresh callback from render, it copies the refreshed
section over to this image, in 32 bits. While rendering
that image then only shows progress updates, as usual.
This also now works for scenes in composte and results
for composite.
This should solve reported crashes for MBlur or SSS.
|
|
Render back! And not only back, even full threaded now. :)
Current state is unfinished, but too much fun to not to
commit for review and test!
WARNING: because render is in a threaded job, it will
use data as can be edited in the UI. That'll crash in many
cases of course... the idea is to limit UI usage to viewing
stuff, especially for the Image Window to inspect layers
or zoom in/out.
What works now;
- F12 render (no anim)
- ESC from render
- ESC pushes back temporary Image Window
- Render to ImageWindow or full-screen.
- Executing composites, and edit composites after render.
Note that the UI is 100% responsive in a render, you can
switch screens, slide area dividers around, or even load
a new file during render. :) It's quite stable even.
I'll collect all crash reports especially to get a good
picture of where the protection is required at least.
Also added: XKey "Delete Objects", to get things crash...
unfortunately it didn't for me.
|
|
Sanitized the 'tweak' event.
Original idea was to have WM event system generating it
automatically. However, I first tested it via a handler
and operator, to check what kind of configurations would
be useful. It appeared to not work nice, also because
that inserting a tweak operator in a keymap is confusing.
Now 'tweaks' are generated automatically, and can be
catched by keymaps as any event. The current definition
of tweak is:
- if Left/Middle/Rightmouse pressed
if event wasn't handled by window queue (modal handlers)
start checking mousepositions
- while mousepositions are checked
- escape on any event other than mouse
- on mouse events:
- add tweak event if mousemove > 10 pixels
- stop checking for tweak if mousebutton released
- Tweak events have a define indicating mousebutton used
EVT_TWEAK_L, EVT_TWEAK_M, EVT_TWEAK_R
- In keymap definitions you can use _S or _A to map to
action or select mouse userdef.
- Event value in keymap should be KM_ANY for all tweaks,
or use one of the eight directions:
EVT_GESTURE_E, _SE, _S, _SW, _W, _NW, _N, _NE
- And of course you can add modifier checks in keymaps for it.
- Because tweaks are a result of mouse events, the handlers get
both to evaluate. That means that RMB-select + tweak will work
correctly.
In case you don't want both to be handled, for example the
CTRL+LMB 'extrude' and CTRL+LMB-tweak 'lasso select', you will
need to set the first acting on a EVT_RELEASE, this event only
gets passed on when tweak fails.
The current system allows all options, configurable, we had in 2.48,
and many more! A diagram of what's possible is on the todo. :)
Also in this commit: lasso select editmesh failed with 'zbuffer
occluded select'. Also circle-select failed.
|
|
Edit Mesh:
- Added back "Edge Shortest Path select"
It now also does regular selection, more fun!
It's mapped to CTRL+click now, and makes or clears selections
between current and previously activated edge.
Seam/Sharp/etc marking is a toolsetting mode still. These
options cannot become properties easily, because the tool
uses the properties of selected edge to clear...
- Removed a whole bunch of G.f flags, related to mesh drawing.
It's all now local in me->drawflags. Here's the list of
removed old globals:
G_DRAWEDGES
G_DRAWFACES
G_DRAWNORMALS
G_DRAW_VNORMALS
G_ALLEDGES
G_HIDDENEDGES
G_DRAWCREASES
G_DRAWSEAMS
G_DRAWSHARP
G_DRAWBWEIGHTS
G_DRAW_EDGELEN
G_DRAW_FACEAREA
G_DRAW_EDGEANG
|
|
Compositor now uses threaded jobs.
- updates happen per preview node! Check this file for
fun: http://www.blender.org/bf/composite_image.blend
(any compo node could get preview!)
- had to ensure the composite data gets fully copied before
it executes thread, so editing is not frustrated.
- put back node buttons (missing init)
- added WM_jobs api call to check for running job,
illustrated with red light icon in 'use nodes' button.
- added another callback to WM_jobs, to initialize.
use this init to ensure you only do it when job really
starts.
- added an extra notifier option for WM_jobs, to signal
finished job (like redraw image view)
- fixed file read error, it copied the screen it read,
instead of using it.
- commented out annoying prints for missing ops in imagewin
|
|
* Copied files containing code for tools from Action Editor to use as a base for the Graph Editor's tools. The toolsets are now very similar, so it should just be a case of making a few tweaks here and there. Currently all of these tools are #if-def'd out, as there are still a few things to clean up.
(BUILDSYSTEM MAINTAINERS BEWARE!)
* Tweaked some UI stuff (width of mode selector in header, names in the spacetype choosing menu)
* Fixed a few bugs which were causing crashes when loading old files with IPO Editors open.
|
|
This commit brings back the drawing code for the 'Graph Editor'. I've decided to call it this, as currently it can show either F-Curves for Animation stored in Actions, or F-Curves for Drivers.
Currently, it shows all curves, since some of the necessary filtering code (i.e. for limiting curve visibility) hasn't been put in place yet. At least this serves as good proof that we can have F-Curves from multiple sources at least.
It should be noted that the code still has to be modified to work with some of the new Animato features, such as F-Curve Modifiers (cycles are an example of one of the features that use this). Also, a nicer way to set the colours of the curves needs to be investigated.
Notes:
* Fixed a few bugs in RNA User-Preferences wrapping
* The keyframe drawing uses the new-style drawing for handles from AnimSys2. There's a minor bug that sometimes occurs, where a distorted handle gets drawn at the origin of the grid on the first run. Hints anyone?
* Removed most of the old data from SpaceIpo struct, as the new code uses that. Maybe later, the directories/files at least should get renamed.
* Removed ancient hack for NVidia/TNT drivers. It is probably no longer needed, but could be restored if someone needs it.
|
|
-r17853:HEAD
|
|
Font object + editing back.
Was quite some work due to a myriad of globals all over!
Works nicely 100% local now.
To enable a single textedit operator, I've added a new
keymap entry KM_TEXTEDIT, which gives all keyboard events
to the handler. Also had to add a new keymap-add function
to force a keymap handler in beginning of region handlers.
In future this can be used to prioritize handlers.
Also: split off the arrow keys (frame change) to a separate
region level handler. Can be set with default flag in
regiontype->keymapflag ED_KEYMAP_FRAMES
|
|
* Triple Buffer is now more complete:
- Proper handling of window resize, duplicate, etc.
- It now uses 3x3 textures (or less) if the power of two sizes
do not match well. That still has a worst case wast of 23.4%,
but better than 300%.
- It can also use the ARB/NV/EXT_texture_rectangle extension
now, which may be supported on hardware that does not support
ARB_texture_non_power_of_two.
- Gesture, menu and brushe redraws now require no redraws at all
from the area regions. So even on a high poly scene just moving
the paint cursor or opening a menu should be fast.
* Testing can be done by setting the "Window Draw Method" in the
User Preferences in the outliner. "Overlap" is still default,
since "Triple Buffer" has not been tested on computers other than
mine, would like to avoid crashing Blender on startup in case
there is a common bug, but it's ready for testing now.
- For reference "Full" draws the full window each time.
- "Triple Buffer" should work for both swap copy and swap exchange
systems, the latter still need the -E command line option for
"Overlap".
- Resizing and going fullscreen still gives flicker here but no
more than "Full" drawing.
* Partial Redraw was added. ED_region_tag_redraw_partial takes a
rect in window coordinates to define a subarea of the region.
On region draw it will then set glScissor to a smaller area, and
ar->drawrct will always be set to either the partial or full
window rect. The latter can then be used for clipping in the 3D
view or clipping interface drawing. Neither is implemented yet.
|
|
Added WM Jobs manager
- WM can manage threaded jobs for you; just provide a couple
of components to get it work:
- customdata, free callback for it
- timer step, notifier code
- start callback, update callback
- Once started, each job runs an own timer, and will for
every time step check necessary updates, or close the
job when ready.
- No drawing happens in jobs, that's for notifiers!
- Every job stores an owner pointer, and based on this owner
it will prevent multiple jobs to enter the stack.
Instead it will re-use a running job, signal it to stop
and allow caller to re-initialize it even.
- Check new wm_jobs.c for more explanation. Jobs API is still
under construction.
Fun: BLI_addtail(&wm->jobs, steve); :)
Put Node shader previews back using wmJobs
- Preview calculating is now fully threaded (1 thread still)
- Thanks to new event system + notifiers, you can see
previews update even while dragging sliders!
- Currently it only starts when you change a node setting.
Warning: the thread render shares Node data, so don't delete
nodes while it renders! This topic is on the todo to make safe.
Also:
- bug in region initialize (do_versions) showed channel list in
node editor wrong.
- flagged the channel list 'hidden' now, it was really in the
way! This is for later to work on anyway.
- recoded Render API callbacks so it gets handlers passed on,
no globals to use anymore, remember?
- previewrender code gets now so much nicer! Will remove a lot
of stuff from code soon.
|
|
This is work-in-progress patching support for converting animation saved in old system to work in the new one.
* Only IPOs/Actions directly attached to Objects + Shapekeys are converted for now. More types will follow...
* This is currently done as a step outside of do_versions() due to problems with various pointers not having been resolved yet, but which are necessary for correct resolution of issues such as drivers... However, the current code does illustrate how the data should be converted to give best results/compat between the two systems.
* Still need to get the converted data working with depsgraph correctly. Currently, some of my testfiles work, but the BBB files still don't.
|
|
* Added undo push for toggling sculpt mode
* Little optimization for brush texture, was generating quite large textures unecessarily
|
|
|
|
* Drawing code from wm_event_system.c split into separate wm_draw.c file.
Now there's 3 different draw methods implemented, not sure what survives
or will be added but is useful for debugging.
* Draw All: redraws everything each time, for reference.
* Draw Overlap All: what the code did before this commit, only draw
regions marked for redraw, and anything that overlaps them.
* Triple Buffer: copies/retores all area regions into a texture, and
blits that before drawing. Menus, brushes, gestures, etc are redrawn
always on top of that.
Currently "Draw Overlap All" is set hardcoded to be used still. Triple
Buffer code is not complete, it doesn't handle window resize yet. Cards
that don't support non power of two textures can need quite large
textures as well, this could be split into multiple smaller ones.
|
|
* Streamlined the filtering code to remove a few redundant options, which required tweaking the code for most tools
* F-Curves are simply displayed using their full paths right now. This should eventually be the UI-string stored in RNA, but right now there are still a few missing things.
* There are a few tools which are not available yet which were available in 2.5 before Animato was added:
- Copy/Paste
- Rearrange channels
Also, the DopeSheet is not totally functional (in terms of displaying animation data for sub-object data yet). That will be added tomorrow.
* Added 'Action Group' pointer to F-Curves, as it will be handy for allowing Bone channels to still remain grouped as they were before with the Action Channels. However, reintroducing such a structure to the data-storage is not anticipated...
|
|
- removed static vars _last_seq, last_imagename and last_sounddir, replacing them with with vars in the "Editing" struct. didnt manage to get the active sequence to load so currently thats lost when loading.
- removed flag SEQ_ACTIVE
- Added operators cut, mute, unmute, deselect_all, select_invert, select, select_more, select_less, select_pick_linked, select_linked and borderselect.
|
|
View3D has been split now in a local part (RegionView3D) and a
per-area part (old View3D). Currently local is:
- view transform
- camera zoom/offset
- gpencil (todo)
- custom clipping planes
Rest is in Area still, like active camera, draw type, layers,
localview, custom centers, around-settings, transform widget,
gridlines, and so on (mostly stuff as available in header).
To see it work; also added new feature for region split,
press SHIFT+ALT+CTRL+S for four-split.
The idea is to make a preset 4-split, configured to stick
to top/right/front views for three views.
Another cool idea to explore is to then box-clip all drawing
based on these 3 views.
Note about the code:
- currently view3d still stores some depricated settings, to
convert from older files. Not all settings are copied over
though, like custom clip planes or the 'lock view to object'.
- since some view3d ops are now on area level, the operators
for it should keep track of that.
Bugfix in transform: quat initialize in operator-invoke missed
one zero.
Als brought back GE to compile for missing Ipos and channels.
|
