Age | Commit message (Collapse) | Author |
|
This commit makes the dot grid used as background in the node editor
more visually stable when zooming in and out.
The dot grid now uses a continuously subdividing pattern, where
each level of subdivision divides the previous five times, similar to
the line grid in the 3D viewport.
The maximum for the "Grid Levels" theme setting is changed to 3, since
any further subdivisions are too small to be visible.
The "Grid Levels" value for the default themes "Blender Dark" and
"Blender Light" is therefore changed to 3, as well.
Reviewed By: Hans Goudey, Pablo Vazquez
Differential Revision: http://developer.blender.org/D13302
|
|
|
|
creation/duplication/resync code, and some basic do_version.
When creating with hierarchies, core code only generates system
overrides, responsibility to define 'user overrides' is then for the
higher-level calling code (Editor/Operator-level).
do_version code uses fairly basic euristics, should be good enough here
though in most cases. and can always be refined later if needed.
Ref: {T95707}.
|
|
Also rename DNA struct members.
|
|
This patch makes the grease pencil smooth operation symmetric.
It also increases the performance a lot if strong smoothing is
required. Additionally there is an option for the position smooth
operation to keep the shape closer to the original for more iterations.
Since the result differs from the previous algorithm, versioning is used
to change the iterations and factor to match the old result.
Differential Revision: http://developer.blender.org/D14325
|
|
child_nbr was used as a percentage as well as the final
number of particles. Rename to avoid confusion.
|
|
There is a dedicated Library Override display mode now, and showing
these elsewhere just adds noise and makes the code problematic to
maintain (since the same element hierarchy will be used in two entirely
different contexts). The corresponding filter settings are removed too.
Part of T95802.
Reviewed by: Bastien Montagne
Differential Revision: https://developer.blender.org/D14411
|
|
This adds a new Add brush for the new curves object type in sculpt mode.
The brush is used to insert new curves (typically hair) on the surface object.
Supported features:
* Add single curve exactly at the cursor position when `Add Amount` is 1.
* Front faces only.
* Independent interpolate shape and interpolate length settings.
* Smooth and flat shading affects curve shape interpolation.
* Spherical and projection brush.
This also adds the `surface_triangle_index` and `surface_triangle_coordinate`
attributes. Those store information about what position on the surface each
added curve is attached to:
* `surface_triangle_index` (`int`): Index of the internal triangle that a curve
is attached to. `-1` when the curve is not attached to the surface.
* `surface_triangle_coordinate` (`float2`): First two numbers of a barycentric
coordinate that reference a specific position within the triangle.
Ref T96444.
Differential Revision: https://developer.blender.org/D14340
|
|
Only formatting changes found by running "make format", no functional
changes
Committed without review, but with verbal approval by Hans Goudey
|
|
This commit removes the implementations of legacy nodes,
their type definitions, and related code that becomes unused.
Now that we have two releases that included the legacy nodes,
there is not much reason to include them still. Removing the
code means refactoring will be easier, and old code doesn't
have to be tested and maintained.
After this commit, the legacy nodes will be undefined in the UI,
so 3.0 or 3.1 should be used to convert files to the fields system.
The net change is 12184 lines removed!
The tooltip for legacy nodes mentioned that we would remove
them before 4.0, which was purposefully a bit vague to allow
us this flexibility. In a poll in a devtalk post showed that the
majority of people were okay with removing the nodes.
https://devtalk.blender.org/t/geometry-nodes-backward-compatibility-poll/20199
Differential Revision: https://developer.blender.org/D14353
|
|
This commit adds three nodes:
- `Remove Attribute`: Removes an attribute with the given name
- `Named Attribute`: A field input node
- `Store Named Attribute`: Puts results of a field in a named attribute
They are added behind a new experimental feature flag, because further
development of attribute search and name dependency visualization will
happen as separate steps.
Ref T91742
Differential Revision: https://developer.blender.org/D12685
|
|
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3dbec we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
|
|
The constant M_PI_4 is added to GLSL to ensure it works there too.
Differential Revision: https://developer.blender.org/D14288
|
|
This patch enables all 8 combinations of Nurbs modes: Cyclic,
Bezier and Endpoint. Also removes restriction on Bezier Nurbs order.
The most significant changes are mode combinations bringing new
meaning. In D13891 is a scheme showing NURBS with same control
points in a modes, and also further description of each possible case.
Differential Revision: https://developer.blender.org/D13891
|
|
|
|
`3DView`'s `use_snap` option has little or nothing to do with using
snapping in `UV`, `Nodes` or `Sequencer`.
So there are no real advantages to keeping these options in sync.
Therefore, individualize the option to use snap for each "spacetype".
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13310
|
|
Correct the default & version existing files.
|
|
|
|
|
|
|
|
Correct misspellings in code comments of "vertex" and "vertices".
See D13932 for more details.
Differential Revision: https://developer.blender.org/D13932
Reviewed by Harley Acheson
|
|
Also improve doc-strings for key-map item constants.
|
|
Supporting two kinds of dragging is redundant, remove tweak events as
they only supported 3 mouse buttons and added complexity from using the
'value' to store directions.
Support only click-drag events (KM_CLICK_DRAG) which can be used with
any keyboard or mouse button.
Details:
- A "direction" member has been added to keymap items and events which
can be used when the event value is set to KM_CLICK_DRAG.
- Keymap items are version patched.
- Loading older key-maps are also updated.
- Currently the key-maps stored in ./release/scripts/presets/keyconfig/
still reference tweak events & need updating. For now they are updated
on load.
Note that in general this wont impact add-ons as modal operators don't
receive tweak events.
Reviewed By: brecht
Ref D14214
|
|
|
|
User request since adding this option in:
51975b89edfcc02131f1f8248e1b3442ea2778fa
When disabled, use the previous behavior when orbiting a camera view.
|
|
The flags overlapped ever since normalize was added, so this
requires versioning to copy the flag value. This needs to be
done both in Blender 3.1 and 3.2.
Differential Revision: https://developer.blender.org/D14165
|
|
|
|
The flags overlapped ever since normalize was added, so this requires
versioning to copy the flag value.
Differential Revision: https://developer.blender.org/D14165
|
|
Even though the size of the map was set back to DEFAULT_SIZE_EXP,
the underlying arrays were left unchained. In some cases this caused
further expansions to result in an unusual reallocation pattern
where MEM_reallocN would run expand the entries into an array
that was in fact the same size.
|
|
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
|
|
|
|
Add check for `NULL` `from` pointer to `BLO_main_validate_shapekeys`,
and delete these shapekeys, as they are fully invalid and impossible to
recover.
Found in a studio production file (`animation
test/snow_parkour/shots/0040/0040.lighting.blend`, svn rev `1111`).
Would be nice to know how this was generated too...
|
|
usages.
|
|
|
|
This reverts commit ff9dc1986e6c9a54fd0bb228e8813551e6baa042.
|
|
This reverts commit ff9dc1986e6c9a54fd0bb228e8813551e6baa042.
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
Increases readability during debugging.
|
|
Also some descriptive text into doc-strings.
|
|
Continuation of 19100aa57d847699d17527b76c2fab1f4ab88885.
|
|
Also other minor corrections & reformat particle system copyright.
|
|
This change will make handling of liboverrides hierarchies (especially
resyncing) much easier and efficient. It should also make it more
resilient to 'degenerate' cases, and allow proper support of things like
parenting an override to another override of the same linked data (e.g.
a override character parented to another override of the same
character).
NOTE: this commit only implements minimal changes to add that data and
generate it for existing files on load. Actual refactor of resync code
to take advantage of this new info will happen separately.
|
|
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
|
|
Previously, nearest interpolation filter was used for preview, because
it offered good performance and bilinear was used for rendering. This
is not always desirable behavior, so filter method can now be chosen by
user. Chosen method will be used for preview and for rendering.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12807
|
|
Part of T91671.
Not much else to say, this is mainly a massive deletion of code.
Note that a few cleanups possible after this proxy removal were kept out
of this commit to try to reduce a bit its size.
Reviewed By: sergey, brecht
Maniphest Tasks: T91671
Differential Revision: https://developer.blender.org/D13995
|
|
This patch refactors the "Hair" data-block, which will soon be renamed
to "Curves". The larger change is switching from an array of `HairCurve`
to find indices in the points array to simply storing an array of offsets.
Using a single integer instead of two halves the amount of memory for that
particular array.
Besides that, there are some other changes in this patch:
- Split the data-structure to a separate `CurveGeometry`
DNA struct so it is usable for grease pencil too.
- Update naming to be more aligned with newer code and the style guide.
- Add direct access to some arrays in RNA
-- Radius is now retrieved as a regular attribute in Cycles.
-- `HairPoint` has been renamed to `CurvePoint`
-- `HairCurve` has been renamed to `CurveSlice`
- Add comments to the struct in DNA.
The next steps are renaming `Hair` -> `Curves`, and adding support
for other curve types: Bezier, Poly, and NURBS.
Ref T95355
Differential Revision: https://developer.blender.org/D13987
|
|
|
|
`BKE_collection_object_add` ensures given object is added to an editable
collection, and not e.g. a linked or override one.
However, some processes like do_version manipulate collections also from
libraries, i.e. linked collections, in those cases we need a version of
the code that unconditionnally adds the given object to the given
colleciton.
|
|
This is from patch D13988. It removes the "- New" from the menu of the
new obj exporter, changes the default addon to just io_import_obj,
and does the right versioning thing.
Also disables the python tests for the old python exporter.
|
|
This is from patch D13988. It removes the "- New" from the menu of the
new obj exporter, changes the default addon to just io_import_obj,
and does the right versioning thing.
Also disables the python tests for the old python exporter.
|