| Age | Commit message (Collapse) | Author |
|---|
|
This commit ports the "Set Spline Type" node to the new curves type.
Performance should be improved in similar ways to the other refactors
from the conversion task (T95443). Converting to and from Catmull Rom
curves is now supported. There are a few cases where a lot of work can
be skipped: when the number of points doesn't change, and when the
types already match the goal type.
The refactor has a few other explicit goals as well:
- Don't count on initialization of attribute arrays when they are
first allocated.
- Avoid copying the entire data-block when possible.
- Make decisions about which attributes to copy when changing curves
more obvious.
- Use higher-level methods to copy data between curve points.
- Optimize for the common cases of single types and full selections.
- Process selected curves of the same types in the same loop.
The Bezier to NURBS conversion is written by Piotr Makal (@pmakal).
Differential Revision: https://developer.blender.org/D14769
|
|
|
|
|
|
Large blocks of versioning code should be separate to keep
`blo_do_versions_300` more readable.
|
|
This patch makes it possible to manipulate strips without need to use
update functions to recalculate effect and meta strips.
Prior to this change function `SEQ_time_update_sequence` had to be used
to update mainly effects and meta strips. This was implemented in a way
that relied on sorted list of strips, which can't always be done and in
rare cases this approach failed.
In case of meta strips, `seqbase` had to be passed and compared with
"active" one to determine whether meta strip should be updated or not.
This is especially weak system that is prone to bugs when functions are
used by python API functions.
Finally, other strip types had startdisp` and `enddisp` fields updated
by this function and a lot of code relied on these fields even if strip
start, length and offsets are available. This is completely
unnecessary.
Implemented changes:
All effects and meta strips are updated when strip handles are moved or
strip is translated, without need to call any update function.
Function `SEQ_time_update_sequence` has been split to
`SEQ_time_update_meta_strip_range` and
`seq_time_update_effects_strip_range`. These functions should be only
used within sequencer module code. Meta update is used for versioning,
which is only reason for it not being declared internally.
Sequence fields `startdisp` and `enddisp` are now only used for
effects to store strip start and end points. These fields should be
used only internally within sequencer module code.
Use function `SEQ_time_*_handle_frame_get` to get strip start and end
points.
To update effects and meta strips with reasonable performance, cache
for "parent" meta strip and attached effects is added to
`SequenceLookup` cache, so it shares invalidation mechanisms.
All caches are populated during single iteration.
There should be no functional changes.
Differential Revision: https://developer.blender.org/D14990
|
|
|
|
Mostly duplicate includes, also use nullptr, and using default
member initializers.
|
|
full scaled image isn't used anymore. It was added to use a different scale when
displaying an image in the image editor. This was replaced by the image engine
redesign.
This change will reduce complexity of {T98375}.
|
|
|
|
To clarify term still frame: This is portion of strip that displays
static image. This area can exist before or after strip movie content.
Still frames were implemented as strip property, but this was never
displayed in panel. Only way to set still frames was to drag strip
handle with mouse or using python API. This would set either
`seq->*still` or `seq->*ofs` where * stands for `start` or `end`.
When strip had offset, it can't have still frames and vice versa, but
this had to be enforced in RNA functions and everywhere in code where
these fields are set directly. Strip can not have negative offset or
negative number of still frames.
This is not very practical approach and still frames can be simply
implemented as applying negative offset. Merging these offsets would
simplify offset calculations for example in D14962 and could make it
easier to also deprecate usage `seq->*disp` and necessity to call
update functions to recalculate strip boundaries.
For users only functional change is ability to set negative strip offset
using property in side panel.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D14976
|
|
|
|
We need to ensure `Main.filepath` is consistent with the current path
where we are saving the .blend file, otherwise some path processing code
can produce invalid results (happens with e.g. the code syncing the two
path storages in Library IDs).
|
|
Properly use CLOG to report info or errors in `writefile.c`, instead of
printf's.
And remove some assert when logging error reports and the issue is not
critical.
|
|
Replace some `if/else if` chains by proper `switch` statement.
Replace some `BLI_assert(0)` calls by `BLI_assert_unreachable()` ones.
|
|
|
|
Knowing when layers are retrieved for write access will be essential
when adding proper copy-on-write support. This commit makes that
clearer by adding `const` where the retrieved data is not modified.
Ref T95842
|
|
This completes support for tiled texture packing on the Blender / Cycles
side of things.
Most of these changes fall into one of three categories:
- Updating Image handling code to pack/unpack tiled and multi-view images
- Updating Cycles to handle tiled textures through BlenderImageLoader
- Updating OSL to properly handle textures with multiple slots
Differential Revision: https://developer.blender.org/D14395
|
|
GPU code used `sz` as an abbreviation for size, as well as a few other
places. Use size where this represents a size in bytes, see: T85728.
|
|
Previously, the number of control points in a new curve was hardcoded.
Differential Revision: https://developer.blender.org/D14857
|
|
|
|
This adds an input to the Subdivision node to specify a field to use
for controling vertex creases. Common code with edge creasing was
extracted into utility functions to avoid redundancy.
Differential Revision: https://developer.blender.org/D14199
|
|
Inspired by D12936 and D12929, this patch adds general purpose
"Combine Color" and "Separate Color" nodes to Geometry, Compositor,
Shader and Texture nodes.
- Within Geometry Nodes, it replaces the existing "Combine RGB" and
"Separate RGB" nodes.
- Within Compositor Nodes, it replaces the existing
"Combine RGBA/HSVA/YCbCrA/YUVA" and "Separate RGBA/HSVA/YCbCrA/YUVA"
nodes.
- Within Texture Nodes, it replaces the existing "Combine RGBA" and
"Separate RGBA" nodes.
- Within Shader Nodes, it replaces the existing "Combine RGB/HSV" and
"Separate RGB/HSV" nodes.
Python addons have not been updated to the new nodes yet.
**New shader code**
In node_color.h, color.h and gpu_shader_material_color_util.glsl,
missing methods hsl_to_rgb and rgb_to_hsl are added by directly
converting existing C code. They always produce the same result.
**Old code**
As requested by T96219, old nodes still exist but are not displayed in
the add menu. This means Python scripts can still create them as usual.
Otherwise, versioning replaces the old nodes with the new nodes when
opening .blend files.
Differential Revision: https://developer.blender.org/D14034
|
|
When height is limited, it is defined by space occupied by strips,
but at least channels 1 to 7 will be always visible. This allows it to
easily overview timeline content by zooming out to maximum extent in Y
axis and panning in X axis.
More channels can be "created" on demand by moving strip to higher
channel. When strip is removed and highest channel becomes empty, view
will stay as is until it is moved down. Then new highest point is
remembered and it is not possible to pan upwards until strip is moved to
higher channel.
Limiting takes into account height of scrubbing and markers area as
well as scrollers. This means that when zoomed out to maximum extent,
no strips are obstructed by fixed UI element.
Fixes T57976
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14263
|
|
|
|
|
|
|
|
Ref T97444.
Differential Revision: https://developer.blender.org/D14700
|
|
- Verrtex paint mode has been refactored into C++ templates.
It now works with both byte and float colors and point
& corner attribute domains.
- There is a new API for mixing colors (also based
on C++ templates). Unlike the existing APIs byte
and float colors are interpolated identically.
Interpolation does happen in a squared rgb space,
this may be changed in the future.
- Vertex paint now uses the sculpt undo system.
Reviewed By: Brecht Van Lommel.
Differential Revision: https://developer.blender.org/D14179
Ref D14179
|
|
The "PROP" in the name reflects its generic status, and removing
"LOOP" makes sense because it is no longer associated with just
mesh face corners. In general the goal is to remove extra semantic
meaning from the custom data types.
|
|
Normals are not read from files anymore, calculating them in versioning
is unnecessary and wasteful.
|
|
Extremely subttle bug that would only appear in some specific
circumstances, would cause memfile undo writing code to falsely detect
some ID as changed because it would get the wrong 'starting point' of
comparison with existing previous memfile step.
See T85756 for detailed explanation and reproducible case.
|
|
This adds a new node editor overlay that helps users to see where
named attributes are used. This is important, because named
attributes can have name collisions between independent node
groups which can lead to hard to find issues.
Differential Revision: https://developer.blender.org/D14618
|
|
|
|
Implements T97163
Newly created meshes have all voxel remesher checkboxes aside from Fix Poles enabled.
Startup files updated with versioning.
Reviewed By @JulianKaspar
Differential Revision: https://developer.blender.org/D14608
Ref D14608
|
|
Also ensure space around text in C-comment blocks.
|
|
This change moves the grid panel UI from the View tab up into the
Overlay panel.
Reasons to move to the Overlay panel include:
- Consistency with the grid options in the 3D viewport
- The grid has been drawn as an Overlay for quite some time already
Additional changes that now make sense to have:
- The grid responds to the main Overlay show/hide toggle
- Adds a toggle to show/hide the grid which is consistent with overlays in general
As before, these grid controls are only available for active UV edit
sessions.
Differential Revision: https://developer.blender.org/D11862
|
|
Expose the "Connected" mode from the weld modifier in the
"Merge by Distance" geometry node. This method only merges
vertices along existing edges, but it can be much faster
because it doesn't have to build a KD Tree of all selected
points.
Differential Revision: https://developer.blender.org/D14321
|
|
Original rework of caches during undo/redo (see D8183) had a very bad
flaw hidden in it: using the key of a ghash as source of data.
While this was effectively working then (cache pointer itself being part
of the key, and said cache pointers not being cleared on file write),
this is a general very bad way to do things.
Now that cache pointers are more and more cleared on file write (as part
of clearing runtime-data to reduce false-positives when checking if an
ID has changed or not), this has to be fixed properly by:
* Not storing the cache pointer itself in the IDCacheKey.
* In undo context, in readfile code trying to preserve caches, store the
cache pointers as values of the mapping, together with the usages counter
The first change potentially affects all usages of
`BKE_idtype_id_foreach_cache`, but in practice this code is only used by
memfile reading code (i.e. undo) currently.
Related to T97015.
Reviewed By: brecht
Maniphest Tasks: T97015
Differential Revision: https://developer.blender.org/D14559
|
|
color attribute system.
This commit removes sculpt colors from experimental
status and unifies it with vertex colors. It
introduces the concept of "color attributes", which
are any attributes that represents colors. Color
attributes can be represented with byte or floating-point
numbers and can be stored in either vertices or
face corners.
Color attributes share a common namespace
(so you can no longer have a floating-point
sculpt color attribute and a byte vertex color
attribute with the same name).
Note: this commit does not include vertex paint mode,
which is a separate patch, see:
https://developer.blender.org/D14179
Differential Revision: https://developer.blender.org/D12587
Ref D12587
|
|
Those geometry types are expected to behave the same as e.g. mesh
with respect to data copying. The fact that this was not enabled
already was an oversight in the initial commit that added these types.
Differential Revision: https://developer.blender.org/D14554
|
|
|
|
Make sure the filtering in the Asset Browser doesn't filter out
collection assets.
|
|
This patch adds channel region to VSE timeline area for drawing channel
headers. It is synchronizedwith timeline region. 3 basic features are
implemented - channel visibility, locking and name.
Channel data is stored in `SeqTimelineChannel` which can be top-level
owned by `Editing`, or it is owned by meta strip to support nesting.
Strip properties are completely independent and channel properties are
applied on top of particular strip property, thus overriding it.
Implementation is separate from channel regions in other editors. This
is mainly because style and topology is quite different in VSE. But
also code seems to be much more readable this way.
Currently channels use functions similar to VSE timeline to draw
background to provide illusion of transparency, but only for background
and sfra/efra regions.
Great portion of this patch is change from using strip visibility and
lock status to include channel state - this is facilitated by functions
`SEQ_transform_is_locked` and `SEQ_render_is_muted`
Originally this included changes in D14263, but patch was split for
easier review.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D13836
|
|
This commit makes the dot grid used as background in the node editor
more visually stable when zooming in and out.
The dot grid now uses a continuously subdividing pattern, where
each level of subdivision divides the previous five times, similar to
the line grid in the 3D viewport.
The maximum for the "Grid Levels" theme setting is changed to 3, since
any further subdivisions are too small to be visible.
The "Grid Levels" value for the default themes "Blender Dark" and
"Blender Light" is therefore changed to 3, as well.
Reviewed By: Hans Goudey, Pablo Vazquez
Differential Revision: http://developer.blender.org/D13302
|
|
|
|
creation/duplication/resync code, and some basic do_version.
When creating with hierarchies, core code only generates system
overrides, responsibility to define 'user overrides' is then for the
higher-level calling code (Editor/Operator-level).
do_version code uses fairly basic euristics, should be good enough here
though in most cases. and can always be refined later if needed.
Ref: {T95707}.
|
|
Also rename DNA struct members.
|
|
This patch makes the grease pencil smooth operation symmetric.
It also increases the performance a lot if strong smoothing is
required. Additionally there is an option for the position smooth
operation to keep the shape closer to the original for more iterations.
Since the result differs from the previous algorithm, versioning is used
to change the iterations and factor to match the old result.
Differential Revision: http://developer.blender.org/D14325
|
|
child_nbr was used as a percentage as well as the final
number of particles. Rename to avoid confusion.
|
|
There is a dedicated Library Override display mode now, and showing
these elsewhere just adds noise and makes the code problematic to
maintain (since the same element hierarchy will be used in two entirely
different contexts). The corresponding filter settings are removed too.
Part of T95802.
Reviewed by: Bastien Montagne
Differential Revision: https://developer.blender.org/D14411
|
