Age | Commit message (Collapse) | Author |
|
This patch is a response to T92588 and is implemented
as a Function/Shader node.
This node has support for Float, Vector and Color data types.
For Vector it supports uniform and non-uniform mixing.
For Color it now has the option to remove factor clamping.
It replaces the Mix RGB for Shader and Geometry node trees.
As discussed in T96219, this patch converts existing nodes
in .blend files. The old node is still available in the
Python API but hidden from the menus.
Reviewed By: HooglyBoogly, JacquesLucke, simonthommes, brecht
Maniphest Tasks: T92588
Differential Revision: https://developer.blender.org/D13749
|
|
When allocating new `CustomData` layers, often we do redundant
initialization of arrays. For example, it's common that values are
allocated, set to their default value, and then set to some other
value. This is wasteful, and it negates the benefits of optimizations
to the allocator like D15082. There are two reasons for this. The
first is array-of-structs storage that makes it annoying to initialize
values manually, and the second is confusing options in the Custom Data
API. This patch addresses the latter.
The `CustomData` "alloc type" options are rearranged. Now, besides
the options that use existing layers, there are two remaining:
* `CD_SET_DEFAULT` sets the default value.
* Usually zeroes, but for colors this is white (how it was before).
* Should be used when you add the layer but don't set all values.
* `CD_CONSTRUCT` refers to the "default construct" C++ term.
* Only necessary or defined for non-trivial types like vertex groups.
* Doesn't do anything for trivial types like `int` or `float3`.
* Should be used every other time, when all values will be set.
The attribute API's `AttributeInit` types are updated as well.
To update code, replace `CD_CALLOC` with `CD_SET_DEFAULT` and
`CD_DEFAULT` with `CD_CONSTRUCT`. This doesn't cause any functional
changes yet. Follow-up commits will change to avoid initializing
new layers where the correctness is clear.
Differential Revision: https://developer.blender.org/D15617
|
|
|
|
|
|
This is old code to keep track of an active search element, so you could
step through the search results. This isn't used anymore, and not needed
since searching now filters the tree to only show matches. If we ever
wanted to have support for stepping through elements again, that should be
done via the active element instead.
|
|
|
|
|
|
|
|
|
|
|
|
- batch rename
- keyframe settings
- tool name in Tool properties header
- tool name in Tool properties Drag (fake) enum
- new file templates
- new preset
- new text datablock
- new collection datablock
- new geometry nodes (modifier and node group)
- new grease pencil data (layers and materials)
Ref. T43295
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15533
|
|
Various situations can lead to un-saved UDIM tiles potentially losing
their contents. The most notable situation is a save and re-load of a
.blend file that has "generated" UDIM tiles that haven't been written to
disk yet. Normal "generated" images are reconstructed on demand in these
circumstances but UDIM tiles do not retain the information required for
reconstruction and empty tiles are presented to the user.
This patch stores the generated type information for each tile to solve
this particular issue. It also shifts the Image generation info into the
1st tile. The existing DNA fields are deprecated but RNA was modified as
to not break API compat.
There's two broad changes here that merit special callout:
- How to distinguish between a tile that should be reconstructed vs.
a tile that should remain empty because loading failed for the UDIMs
- How to better handle Image Source changes
The first issue is addressed as follows:
- Each time a tile is filled with generated content we set a new
IMA_GEN_TILE flag
- Each time a tile is saved to disk we remove the IMA_GEN_TILE flag
- When requesting an ibuf: If the ibuf is null, we check to see if
IMA_GEN_TILE is set. If it is set, go ahead and re-create the tile.
Otherwise, do nothing.
The second set of changes have to do with ensuring that information is
carried along as far as possible when the, sometimes destructive, act of
changing an Image Source is performed. Behavior should be a bit more
natural and expected now; though users will rarely, or should rarely, be
modifying this property. The full table describing the behavior is in
the differential.
Differential Revision: https://developer.blender.org/D14885
|
|
|
|
|
|
|
|
Change startup roughness to 0.5.
Differential Revision: https://developer.blender.org/D15586
|
|
|
|
BLO_update_defaults_startup_blend
If a screen had to be renamed, the old name was not removed from
the name map. Fixes T100173.
|
|
This is a port of sculpt-dev's `SculptVertRef` refactor
(note that `SculptVertRef was renamed to PBVHVertRef`)
to master. `PBVHVertRef` is a structure that abstracts
the concept of a vertex in the sculpt code; it's simply
an `intptr_t` wrapped in a struct.
For `PBVH_FACES` and `PBVH_GRIDS` this struct stores a
vertex index, but for `BMesh` it stores a direct pointer
to a BMVert. The intptr_t is wrapped in a struct to prevent
the accidental usage of it as an index.
There are many reasons to do this:
* Right now `BMesh` verts are not logical sculpt verts;
to use the sculpt API they must first be converted to indices.
This requires a lot of indirect lookups into tables, leading to performance
loss. It has also led to greater code complexity and duplication.
* Having an abstract vertex type makes it feasible to have one unified
temporary attribute API for all three PBVH modes, which in turn
made it rather trivial to port sculpt brushes to DynTopo in
sculpt-dev (e.g. the layer brush, draw sharp, the smooth brushes,
the paint brushes, etc). This attribute API will be in a future patch.
* We need to do this anyway for the eventual move to C++.
Differential Revision: https://developer.blender.org/D14272
Reviewed By: Brecht Van Lommel
Ref D14272
|
|
While this was not a critical issue (that lib pointer is only used for
some kind of sanity check that no linked data uses local ID pointers),
better to keep `IDP_BlendReadLib` in sync with all other lib-linking
code.
|
|
Was causing an assert that the old name exists in the name map, but
is not present in the actual database. Reported in #blender-coders
|
|
libmap.
New `oldnewmap_lib_insert` does nothing special, it just wraps around existing
`oldnewmap_insert`, but it's the logical counter part of `oldnewmap_liblookup`.
It also helps tremendously when debuging complex ID pointers issues in
readfile.c code.
|
|
Crash would happen when a linked ID would become missing, that was
'pre-declared' and used only once as a 'weak link' in another library
stored before the one it came from.
In that case, the place-holder generated in read code would be freed in
`read_library_clear_weak_links`, when handling its 'owner' library, but
since all previous libraries in the list had already been 'lib_linked'
and their filedata (and related libmap) freed, the update of the libmaps
in `read_library_clear_weak_links` would not apply to data from those
previous libraries, leading to ID pointers there pointing to freed
memory.
This fix should also be backported to 2.93.
|
|
|
|
|
|
Add a version of #BKE_main_namemap_validate that also fixes the issues,
and call it in a do_version to fix recent .blend files saved after the
regression introduced in rB7f8d05131a77.
This is mandatory to fix some production files here at the studio, among
other things.
|
|
The Graph, Driver, and Dopesheet's (and sub modes) properties panel
(N-Panel) are now open by default. This includes the editors in the
default Animation workspace.
Note that, because the Timeline is implemented as a special mode of the
Dopesheet, switching between Timeline and Dopesheet will *not* change
the visibility of the properties panel.
Maniphest Tasks: T97980
Differential Revision: https://developer.blender.org/D14910
|
|
|
|
read/write.
Code handling read/write of libraries is still particular... but trying
to call `library_runtime_reset` on a random address at readtime was an
obvious mistake I should have caught during review :(
Regression from rB7f8d05131a77.
|
|
names/basenames/suffixes
An implementation of T73412, roughly as outlined there:
Track the names that are in use, as well as base names (before
numeric suffix) plus a bit map for each base name, indicating which
numeric suffixes are already used. This is done per-Main/Library,
per-object-type.
Timings (Windows, VS2022 Release build, AMD Ryzen 5950X):
- Scene with 10k cubes, Shift+D to duplicate them all: 8.7s -> 1.9s.
Name map memory usage for resulting 20k objects: 4.3MB.
- Importing a 2.5GB .obj file of exported Blender 3.0 splash scene
(24k objects), using the new C++ importer: 34.2s-> 22.0s. Name map
memory usage for resulting scene: 8.6MB.
- Importing Disney Moana USD scene (almost half a million objects):
56min -> 10min. Name map usage: ~100MB. Blender crashes later on
when trying to render it, in the same place in both cases, but
that's for another day.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D14162
|
|
|
|
This patch adds (selected/active) outline around a curve object in object mode.
{F13270680}
In the past the draw bounds option was enabled for any curve objects. With this
patch it isn't needed and will be disabled.
In the future the curve outline could also be enabled to improve GPU selection.
Reviewed By: dfelinto, HooglyBoogly, fclem
Maniphest Tasks: T95933
Differential Revision: https://developer.blender.org/D15308
|
|
It's helpful to make the separation of legacy data formats explicit,
because it declutters actively changed code and makes it clear which
areas do not follow Blender's current design. In this case I separated
the `MFace`/"tessface" conversion code into a separate blenkernel
.cc file and header. This also makes refactoring to remove these
functions simpler because they're easier to find.
In the future, conversions to the `MLoopUV` type and `MVert`
can be implemented here for the same reasons (see T95965).
Differential Revision: https://developer.blender.org/D15396
|
|
Adds a "Pin Scene" option to the workspace. When activated, the workspace will
remember the scene that was last activated in it, so that when switching back
to this workspace, the same scene will be reactivated. This is important for a
VSE workflow, so that users can switch between different workspaces displaying
a scene and thus a timeline for a specific task.
The option can be found in the Properties, Workspace tab. D11890 additionally
adds an icon for this to the scene switcher in the topbar.
The workspace data contains a pointer to the scene which is a UI to scene data
relation. When appending a workspace, the pointer is cleared.
Differential Revision: https://developer.blender.org/D9140
Reviewed by: Brecht Van Lommel, Bastien Montagne (no final accept, but was fine
with the general design earlier)
|
|
Issue was caused by using function `SEQ_render_give_stripelem` to obtain
first `StripElem`, but this function now takes retiming into account.
Since first element was meant to be obtained, point to it directly by
using `seq->strip->stripdata`.
|
|
|
|
Commit 302b04a5a3fc introduced new retiming system, that unified sound
pitch animation with strip speed control. Because sound playback is
handled in different way, this did not work as expected and old files
were broken. In addition animation was not copied to new property.
Revert length position and offset handling for sound strips so their
position does not change and remap fcurves to new `speed_factor`
property.
|
|
This commit contains various new features for curves sculpt mode
that have been developed in parallel.
* Selection:
* Operator to select points/curves randomly.
* Operator to select endpoints of curves.
* Operator to grow/shrink an existing selection.
* New Brushes:
* Pinch: Moves points towards the brush center.
* Smooth: Makes individual curves straight without changing the root
or tip position.
* Puff: Makes curves stand up, aligning them with the surface normal.
* Density: Add or remove curves to achieve a certain density defined
by a minimum distance value.
* Slide: Move root points on the surface.
Differential Revision: https://developer.blender.org/D15134
|
|
|
|
This commit adds a new face nearest snapping mode, adds new snapping
options, and (lightly) refactors code around snapping.
The new face nearest snapping mode will snap transformed geometry to the
nearest surface in world space. In contrast, the original face snapping
mode uses projection (raycasting) to snap source to target geometry.
Face snapping therefore only works with what is visible, while nearest
face snapping can snap geometry to occluded parts of the scene. This new
mode is critical for retopology work, where some of the target mesh
might be occluded (ex: sliding an edge loop that wraps around the
backside of target mesh).
The nearest face snapping mode has two options: "Snap to Same Target"
and "Face Nearest Steps". When the Snap to Same Object option is
enabled, the selected source geometry will stay near the target that it
is nearest before editing started, which prevents the source geometry
from snapping to other targets. The Face Nearest Steps divides the
overall transformation for each vertex into n smaller transformations,
then applies those n transformations with surface snapping interlacing
each step. This steps option handles transformations that cross U-shaped
targets better.
The new snapping options allow the artist to better control which target
objects (objects to which the edited geometry is snapped) are considered
when snapping. In particular, the only option for filtering target
objects was a "Project onto Self", which allowed the currently edited
mesh to be considered as a target. Now, the artist can choose any
combination of the following to be considered as a target: the active
object, any edited object that isn't active (see note below), any non-
edited object. Additionally, the artist has another snapping option to
exclude objects that are not selectable as potential targets.
The Snapping Options dropdown has been lightly reorganized to allow for
the additional options.
Included in this patch:
- Snap target selection is more controllable for artist with additional
snapping options.
- Renamed a few of the snap-related functions to better reflect what
they actually do now. For example, `applySnapping` implies that this
handles the snapping, while `applyProject` implies something entirely
different is done there. However, better names would be
`applySnappingAsGroup` and `applySnappingIndividual`, respectively,
where `applySnappingIndividual` previously only does Face snapping.
- Added an initial coordinate parameter to snapping functions so that
the nearest target before transforming can be determined(for "Snap to
Same Object"), and so the transformation can be broken into smaller
steps (for "Face Nearest Steps").
- Separated the BVH Tree getter code from mesh/edit mesh to its own
function to reduce code duplication.
- Added icon for nearest face snapping.
- The original "Project onto Self" was actually not correct! This option
should be called "Project onto Active" instead, but that only matters
when editing multiple meshes at the same time. This patch makes this
change in the UI.
Reviewed By: Campbell Barton, Germano Cavalcante
Differential Revision: https://developer.blender.org/D14591
|
|
This patch includes the full shadow functionality for LineArt:
- Light contour and cast shadow lines.
- Lit/shaded region selection.
- Enclosed light/shadow shape calculation.
- Silhouette/anti-silhouette selection.
- Intersection priority based on shadow edge identifier.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D15109
|
|
Patch implements better way to control playback speed than it is
possible to do with speed effect. Speed factor property can be set in
Time panel.
There are 2 layers of control:
Option to retime movie to match scene FPS rate.
Custom speed factor to control playback rate.
Since playback rate is strip property, it is now possible to manipulate
strip as normal one even if it is retimed.
To facilitate manipulation, some functions need to consider speed factor
and apply necessary corrections to strip offset or strip start. These
corrections may need to be float numbers, so start and offsets must be
float as well.
Sound strips now use speed factor instead of pitch. This means, that
strips will change length to match usable length. In addition, it is
possible to group movie and sound strip and change speed of meta strip.
|
|
Since we reset the default theme for the 3.0 release, we don't need to
keep these version patches around anymore.
Ref D13131
|
|
Commit 277fa2f441f4 added channels region to unintended editors if sequencer was
used in area. This caused issues with some editors having 2 tool regions and
non functioning side panel.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D15253
|
|
One case of copying image formats was not properly using BKE_image_format_copy.
To fix this for existing .blend file we need to do versioning, ensuring the curve
mapping is properly copied.
|
|
Adds an overlay option to show/hide the spline points & lines of masks in the Mask Editor.
It also moves the "smooth" option up (its position left of the selection dropdown was missleading).
{F11847272}
This emerged from a discussion in https://developer.blender.org/D12776
Differential Revision: https://developer.blender.org/D13314
|
|
This adds a new parameter to the "Combined" overlay mode of the mask editor.
The "blending factor" allows users to blend the mask exterior with the original
footage to visualise the content of the mask in a more intuitive way. The
"Alpha" overlay is unaffected by this change.
The existing "Combined" overlay is used like before (covering everything
outside the mask in black), but can be blended with the slider in the mask
overlay to look at the exterior.
This is part of an effort to make mask editing more intuitive & easy to use:
https://developer.blender.org/T93097
Differential Revision: https://developer.blender.org/D13284
|
|
|
|
Part of T98560.
See https://wiki.blender.org/wiki/Source/Interface/Views
Adds all the basic functionality needed for grid views. They display
items in a grid of rows and columns, typically with a preview image and
a label underneath. Think of the main region in the Asset Browser.
Current features:
- Active item
- Notifier listening (also added this to the tree view)
- Performance: Skip adding buttons that are not scrolled into view
(solves performance problems for big asset libraries, for example).
- Custom item size
- Preview items (items that draw a preview with a label underneath)
- Margins between items scale so the entire region width is filled with
column, rather than leaving a big empty block at the right if there's
not enough space for another column (like the File and current Asset
Browser does it).
- "Data-View Item" theme colors. Not shown in the UI yet.
No user visible changes expected since the grid views aren't used for
anything yet.
This was developed as part of a rewrite of the Asset Browser UI
(`asset-browser-grid-view` branch), see T95653. There's no reason to
keep this part in a branch, continuing development in master makes
things easier.
Grid and tree views have a lot of very similar code, so I'm planning to
unify them to a degree. I kept things separate for the start to first
find out how much and what exactly makes sense to override.
|
|
It's perfectly legal for `nmd->settings.properties` to be null if
there are no properties.
|