| Age | Commit message (Collapse) | Author |
|---|
|
After this commit, all mesh data extraction and drawing code is in C++,
including headers, making it possible to use improved types for future
performance improvements and simplifications.
The only non-trivial changes are in `draw_cache_impl_mesh.cc`,
where use of certain features and macros in C necessitated larger
changes.
Differential Revision: https://developer.blender.org/D15088
|
|
This avoids reusing gpu shader files that have different requirements.
|
|
This is needed to avoid potential naming collision with other engines.
|
|
This is needed to avoid potential naming collision with other engines
|
|
|
|
This adds support to render Curves attributes in EEVEE.
Each attribute is stored in a texture derived from a VBO. As the
shading group needs the textures to be valid upon creation, the
attributes are created and setup during its very creation, instead
of doing it lazily via create_requested which we cannot rely on
anyway as contrary to the mesh batch, we do cannot really tell if
attributes need to be updated or else via some `DRW_batch_requested`.
Since point attributes need refinement, and since attributes are all
cast to vec4/float4 to account for differences in type conversions
between Blender and OpenGL, the refinement shader for points is
used as is. The point attributes are stored for each subdivision level
in CurvesEvalFinalCache. Each subdivision level also keeps track of the
attributes already in use so they are properly updated when needed.
Some basic garbage collection was added similar to what is done
for meshes: if the attributes used over time have been different
from the currently used attributes for too long, then the buffers
are freed, ensuring that stale attributesare removed.
This adds `CurvesInfos` to the shader creation info, which stores
the scope in which the attributes are defined. Scopes are stored
as booleans, in an array indexed by attribute loading order which
is also the order in which the attributes were added to the material.
A mapping is necessary between the indices used for the scoping, and
the ones used in the Curves cache, as this may contain stale
attributes which have not been garbage collected yet.
Common utilities with the mesh code for handling requested
attributes were moved to a separate file.
Differential Revision: https://developer.blender.org/D14916
|
|
This module allow tracking of object and geometry data accross time.
This commit adds no user visible changes.
It work in both viewport (*) and render mode, gives correct motion
for any camera projection type and is compatible with displacement (**).
It is a huge improvement upon the old EEVEE velocity which was only used
for motion blur and only available in render.
It is also an improvement for speed as the animated objects do not need to
be rendered a 3rd time. The code is also much cleaner: no GPUVertBuf
duplication, no GPUBatch amendment, no special cases for different geometry
types, no DRWShadingGroup per object, no double buffering of velocity.
The module is still work in progress as the final output may still be
flawed.
(*): Viewport support is already working but there might be some cases where
mapping will fail. For instance if topology changes but not vertex count.
(**): Displacement does not contribute to motion vectors. Surfaces using
displacement will have the same motion vectors as if they were not displaced.
|
|
|
|
|
|
|
|
|
|
This was because the main `surface_vert.glsl` was changed to accomodate the
needs of the `ShaderCreateInfo` but was still used by the cryptomatte
shader. The fix is to include the same libraries as the material shaders
and bypass `attrib_load()`.
|
|
|
|
This commit introduce back support for all geometry types and all nodetree support.
Only the forward shading pipeline is implemented for now.
Vertex Displacement is automatically enabled for now.
Lighting & Shading is placeholder.
Related Task: T93220
# Conflicts:
# source/blender/draw/engines/eevee_next/eevee_engine.cc
# source/blender/gpu/CMakeLists.txt
|
|
This should have no functional changes.
|
|
This should have no functional changes.
|
|
This should have no functional changes.
|
|
This should have no functional changes.
Removed `antialiasing_vert.glsl` becaus it was actually a duplicate of
`common_fullscreen_vert.glsl`.
|
|
Simple port with a few cosmetic changes:
- Attribute named "color" for indices VBO is now called "index"
- The indices VBO is now composed of `int`s instead of `uint`s (this simplifies the source)
Differential Revision: https://developer.blender.org/D14800
|
|
Along with the port to createInfo this also:
- Packs constant uniforms in a UBO.
- Share enum declaration and unify names
- Makes codeflow easier to undestand.
- Split grid data to its own struct.
# Conflicts:
# source/blender/draw/engines/overlay/overlay_grid.c
|
|
Extends the changes started in f31c3f8114616bb to completely separate
much of the DRW curves code from the particle hair drawing. In the short
term this increases duplication, but the idea is to simplify development
by making it easier to do larger changes to the new code, and the new
system will replace the particle hair at some point.
After this, only the shaders themselves are shared.
Differential Revision: https://developer.blender.org/D14699
|
|
|
|
This is to make the codegen and shading nodes object type agnostic. This
is essential for flexibility of the engine to use the nodetree as it see
fits.
The essential volume attributes struct properties are moved to the
`GPUMaterialAttribute` which see its final input name set on creation.
The binding process is centralized into `draw_volume.cc` to avoid
duplicating the code between multiple engines. It mimics the hair attributes
process.
Volume object grid transforms and other per object uniforms are packed into
one UBO per object. The grid transform is now based on object which simplify
the matrix preparations.
This also gets rid of the double transforms and use object info orco factors
for volume objects.
Tagging @brecht because he did the initial implementation of Volume Grids.
|
|
This commit removes all EEVEE specific code from the `gpu_shader_material*.glsl`
files. It defines a clear interface to evaluate the closure nodes leaving
more flexibility to the render engine.
Some of the long standing workaround are fixed:
- bump mapping support is no longer duplicating a lot of node and is instead
compiled into a function call.
- bump rewiring to Normal socket is no longer needed as we now use a global
`g_data.N` for that.
Closure sampling with upstread weight eval is now supported if the engine needs
it.
This also makes all the material GLSL sources use `GPUSource` for better
debugging experience. The `GPUFunction` parsing now happens in `GPUSource`
creation.
The whole `GPUCodegen` now uses the `ShaderCreateInfo` and is object type
agnostic. Is has also been rewritten in C++.
This patch changes a view behavior for EEVEE:
- Mix shader node factor imput is now clamped.
- Tangent Vector displacement behavior is now matching cycles.
- The chosen BSDF used for SSR might change.
- Hair shading may have very small changes on very large hairs when using hair
polygon stripes.
- ShaderToRGB node will remove any SSR and SSS form a shader.
- SSS radius input now is no longer a scaling factor but defines an average
radius. The SSS kernel "shape" (radii) are still defined by the socket default
values.
Appart from the listed changes no other regressions are expected.
|
|
This adds support to show dots for the curves points when in edit mode,
using a specific overlay.
This also adds `DRW_curves_batch_cache_create_requested` which for now
only creates the point buffer for the newly added `edit_points` batch.
In the future, this will also handle other edit mode overlays, and
probably also replace the current curves batch cache creation.
Maniphest Tasks: T95770
Differential Revision: https://developer.blender.org/D14262
|
|
|
|
ImageTileWrapper is a wrapper around ImageTile to centralize tile calculations when
using CPP. Currentry used by the image engine and will be used for the 3d
texturing brush project.
|
|
# Conflicts:
# source/blender/draw/intern/draw_common_shader_shared.h
# source/blender/draw/intern/shaders/draw_view_info.hh
|
|
|
|
|
|
|
|
This is quite a huge cleanup. Making use of the `common_gpencil_lib.glsl`
to share more codes and use more consistent codestyle.
The gpencil engine specifics are now out of the `gpencil_vertex()`
function making it easier to add more features.
There should be no regression as all workarounds are kept as is.
|
|
This is supposed to hold the latest improvement from the EEVEE rewrite branch.
Note that a restart is necessary in order for the engine to appear.
The registration code is a bit convoluted as it needs to be after the WM_init.
|
|
Also use SRC_ prefix for source variables so cmake_consistency_check.py
detects these files as being known to CMake.
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
|
|
Can also happen in other places when the overlay engine is active. Some
parts of the overlay engine uses builtin shaders, but disable the color
space conversion to the target texture.
Currently there the overlay engine has its own set of libraries it could
include and defined a macro to pass-throught the color space conversion.
The library include mechanism currently fails when it couldn't find the
builtin library in the libraries of the overlay engine. This only
happened in debug mode.
This change will not fail, but warns the developer if a library could
not be included. In the future this should be replaced by a different
mechanism that can disable the builtin library. See {T95382}.
|
|
Empty (UDIM) tiles where drawn with a transparency checkerboard. They
should be rendered with a border background. The cause is that the image
engine would select a single area that contained all tiles and draw them
as being part of an image.
The fix is to separate the color and depth part of the image engine
shader and only draw the depths of tiles that are enabled.
|
|
Ported the image engine shaders to use the GPUShaderCreateInfo struct.
No functional changes.
|
|
Adding better support for drawing huge images in the image/uv editor. Also solved tearing artifacts.
The approach is that for each image/uv editor a screen space gpu texture is created that only contains
the visible pixels. When zooming or panning the gpu texture is rebuild.
Although the solution isn't memory intensive other parts of blender memory usage scales together with
the image size.
* Due to complexity we didn't implement partial updates when drawing images tiled (wrap repeat).
This could be added, but is complicated as a change in the source could mean many different
changes on the GPU texture. The work around for now is to tag all gpu textures to be dirty when
changes are detected.
Original plan was to have 4 screen space images to support panning without gpu texture creation.
For now we don't see the need to implement it as the solution is already fast. Especially when
GPU memory is shared with CPU ram.
Reviewed By: fclem
Maniphest Tasks: T92525, T92903
Differential Revision: https://developer.blender.org/D13424
|
|
This uses a light parser / string modification pass to convert
C++ enum declaration syntax to GLSL compatible one.
GLSL having no support for enums, we are forced to convert the
enum values to a series of constant uints.
The parser (not really one by the way), being stupidly simple,
will not change anything to the values and thus make some C++
syntax (like omitting the values) not work.
The string replacement happens on all GLSL files on startup.
I did not measure significant changes in blender startup speed.
There is plans to do all of this at compile time.
We limit the scope of the search to `.h` and `.hh` files to prevent
confusing syntax in `.glsl` files.
There is basic error reporting with file, line and char logging
for easy debuggabiliy.
The requirements to use this enum sharing system are already listed in
`gpu_shader_shared_utils.h` and repeated on top of the preprocessor
function.
|
|
Also adds a few things to GPUShader for easily create shaders.
Heavy usage of macros to compose the createInfo and avoid
duplications and copy paste bugs.
This makes the link between the shader request functions
(in workbench_shader.cc) and the actual createInfo a bit
obscure since the names are composed and not searchable.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D13910
|
|
|
|
This reverts commit edee5a947b7ea3e1324aa334a22c7c9bbf47f5f7.
Fixes compilation error (Missing file BLI_float2.hh)
|
|
This reverts commit 8fb2ff458ba579dba08bfdf57d043ad158b5db07.
Missing some files.
|
|
This is a first part of the Shader Create Info system could be.
A shader create info provides a way to define shader structure, resources
and interfaces. This makes for a quick way to provide backend agnostic
binding informations while also making shader variations easy to declare.
- Clear source input (only one file). Cleans up the GPU api since we can create a
shader from one descriptor
- Resources and interfaces are generated by the backend (much simpler than parsing).
- Bindings are explicit from position in the array.
- GPUShaderInterface becomes a trivial translation of enums and string copy.
- No external dependency to third party lib.
- Cleaner code, less fragmentation of resources in several libs.
- Easy to modify / extend at runtime.
- no parser involve, very easy to code.
- Does not hold any data, can be static and kept on disc.
- Could hold precompiled bytecode for static shaders.
This also includes a new global dependency system.
GLSL shaders can include other sources by using #pragma BLENDER_REQUIRE(...).
This patch already migrated several builtin shaders. Other shaders should be migrated
one at a time, and could be done inside master.
There is a new compile directive `WITH_GPU_SHADER_BUILDER` this is an optional
directive for linting shaders to increase turn around time.
What is remaining:
- pyGPU API {T94975}
- Migration of other shaders. This could be a community effort.
Reviewed By: jbakker
Maniphest Tasks: T94975
Differential Revision: https://developer.blender.org/D13360
|
|
This adds wrapper classes that make it easier to use GPU objects in C++.
####Motivations:####
- Easier handling of GPU objects.
- EEVEE rewrite already makes use of similar wrappers.
- There is the ongoing effort to use more C++ in the codebase
and lans to port more engines to it.
- The shader code refactor will make use of many UBOs with shared
struct declaration. This helps managing them.
- Safer handling of `TextureFromPool` which can't be bound as normal
texture (only texture ref) and can be better tracked in the future.
####Considerations:####
- I chose the `blender::draw` namespace because `blender::gpu` already has private classes (i.e: `gpu::Texture`).
- Theses are wrappers that manage a GPU object internally. They might be confused with actual `Texture`. However, the name `TextureWrapper` is a bit too much verbose in my opinion. I'm open to suggestion about better name.
Reviewed By: jbakker
Differential Revision: http://developer.blender.org/D13805
|
|
|
|
|
|
This evaluator is used in order to evaluate subdivision at render time, allowing for
faster renders of meshes with a subdivision surface modifier placed at the last
position in the modifier list.
When evaluating the subsurf modifier, we detect whether we can delegate evaluation
to the draw code. If so, the subdivision is first evaluated on the GPU using our own
custom evaluator (only the coarse data needs to be initially sent to the GPU), then,
buffers for the final `MeshBufferCache` are filled on the GPU using a set of
compute shaders. However, some buffers are still filled on the CPU side, if doing so
on the GPU is impractical (e.g. the line adjacency buffer used for x-ray, whose
logic is hardly GPU compatible).
This is done at the mesh buffer extraction level so that the result can be readily used
in the various OpenGL engines, without having to write custom geometry or tesselation
shaders.
We use our own subdivision evaluation shaders, instead of OpenSubDiv's vanilla one, in
order to control the data layout, and interpolation. For example, we store vertex colors
as compressed 16-bit integers, while OpenSubDiv's default evaluator only work for float
types.
In order to still access the modified geometry on the CPU side, for use in modifiers
or transform operators, a dedicated wrapper type is added `MESH_WRAPPER_TYPE_SUBD`.
Subdivision will be lazily evaluated via `BKE_object_get_evaluated_mesh` which will
create such a wrapper if possible. If the final subdivision surface is not needed on
the CPU side, `BKE_object_get_evaluated_mesh_no_subsurf` should be used.
Enabling or disabling GPU subdivision can be done through the user preferences (under
Viewport -> Subdivision).
See patch description for benchmarks.
Reviewed By: campbellbarton, jbakker, fclem, brecht, #eevee_viewport
Differential Revision: https://developer.blender.org/D12406
|
