| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
- BKE_lamp -> BKE_light
- Main.lamp -> light
|
|
Previous waning suppression was only tested with clang.
|
|
Also move view_ubo into G_draw.
|
|
Note that this commit remove the support (that was not really working)
for shadows in sculpt mode.
|
|
We are still ditching the specular intensity of SSR (ssr_data.xyz).
But at least now there is some comment about it.
See T61704 for user reports on that matter.
Comments with the blessing of Clément Foucault.
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Rename for Camera, View3D (also CameraParams & Render not DNA)
|
|
Can be found in the viewport's simplify panel, allows to easily
disable high-res display for all the smokes in the scene.
|
|
Not sure what BIG is, it is HIGH RESOLUTION.
|
|
Remove forcing separate albedo when rendering. It was creating confusion.
|
|
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
Needed for clan-format not to wrap onto one line.
|
|
* Use simple default view transform for color pickers, as Filmic does not work
well for all types of colors. We better handle this with an option and tagging
of colors as emissive or albedo like.
* For solid/workbench we also no longer use Filmic, as there is not enough contrast
and it's not really needed since this is not physically based lighting.
* For lookdev always take into account the view transform and look. Other view
settings like exposure are only taken into account if scene lighting is used,
since these are often dependent on scene light intensity.
Fixes T61022, T57649, T59363.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
This removes a bunch of animation/driver evaluations and recalc flags that
should be redundant in the new depsgraph, and were incorrectly affecting
the evaluated scene in a permanent way.
Still two cases that could be removed if the depsgraph is improved, in
BKE_object_handle_data_update and BKE_cachefile_update_frame.
For physics subframe interpolation there are also still calls to
BKE_object_where_is_calc that should ideally be removed as well, though
they are not known to cause keyframing bugs.
Differential Revision: https://developer.blender.org/D4274
|
|
Improve clang-format output.
|
|
Also rename GPUVertexAttribs to GPUVertAttrLayers,
avoids confusion with GPUVertAttr which isn't closely related.
|
|
Done using:
source/tools/utils_maintenance/c_sort_blocks.py
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add 'G_draw' for all draw manager globals,
avoids adding extern to each file.
Connection between `ts` and `globals_ubo` wasn't obvious,
now called `G_draw.block` & `G_draw.block_ubo`.
|
|
|
|
Prevents clang-format merging into a single line.
|
|
Some of Eevee's Bloom defaults are not very good for physically based rendering. This patches addresses this issue.
This picture shows one of the problems with current default. Bloom looks very foggy:
{F6280495}
Even worse, light emitters much dimmer than the Sun can make everything equally hazy if Clamp is set to 1.0 and intensity to 0.8 (current default). Artists often forget to adjust Clamp value and do not know what value to use for realistic intensity. Also, currently both Clamp and Intensity do not have good UI ranges. This is why often Eevee renders end up very hazy and bloom often does not look right.
Bloom effect plays important role to help to distinguish between bright and relatively dim light sources. With current defaults this is broken because Clamp set to 1.0. Also, it cannot be disabled if set to 0 like expected. This patch fixes this and sets it to 0 by default. If users need to clamp, they can do so easily with UI range up to 1000. This range is good enough for most cases and provides enough precision to control lower values, and the highest value helps to limit bloom from the Sun if necessary and will leave untouched most other light emitters. If needed, much higher values for Clamp can be entered manually up to 100000. 10000 is still affects the Sun, but up to 100000 highest limit allows to clamp anything that is much brighter than the Sun if user needs to limit bloom in such cases (for example, bright explosion in the sky or anything else very bright).
I propose new default for bloom Intensity - 0.05 and UI range to suggests realistic values. Bloom Intensity > 0.1 is not realistic for clean lens but the user can enter manually much larger values if needed.
For comparison, here is a my own photo with and without bloom caused by the Sun (on second photo the Sun was occluded with an object).
{F6280500}
{F6280492}
In real life bloom is much more subtle and does not look hazy. If Clamp is disabled, then out of 0.1, 0.05 and 0.025 values I have tried, 0.05 looks most similar to the photo. Here is test render with and without bloom with the Sun in similar position like on the photo:
{F6280496}
{F6280494}
Using color probe 27x27 I compared lightness below the horizon under the Sun. In rendered by Eevee images lightness difference was 17. In case of the photos lightness difference in similar place was 11. I then compared leftmost spot (also below the horizon) and lightness difference was approximately 2 between two photos and 1 between rendered images. In other words, with these settings bloom effect is not too strong and is not too weak. Visually it may seem like decreasing bloom intensity may increase photorealism, but then bloom effect would be too localized even for the Sun.
Besides this single test, I tested in many other scenes as well, with and without the Sun, with different HDRIs, and as far as I can tell 0.05 intensity turned out to be good default - it produces bloom strong enough to be noticeable and not too hazy.
In Cycles shutter default value is 0.50, so for consistency set to 0.5 by default in Eevee too. Besides, 0.5 is typical standard for real cameras, and values higher than 0.5 usually are needed only if very strong motion blur is desired.
Here is summary of all changes:
Bloom Intensity: 0.8 > 0.05
Bloom Intensity UI range: 0-10 > 0-0.1
Bloom Clamp: 1.0 > 0.0 (disabled by default)
Bloom Clamp manual range: 0-1000 > 0-100000
Bloom Clamp UI range: 0-10 > 0-1000
Shutter: 1.0 > 0.5
This patch is related to the discussion in this thread, there are more examples of what bloom will look like with 0.05 intensity by me and others:
https://devtalk.blender.org/t/eevee-needs-to-have-physically-based-defaults/4700
Reviewers: fclem
Reviewed By: fclem
Subscribers: pablovazquez, billreynish, rboxman
Tags: #eevee
Differential Revision: https://developer.blender.org/D4212
|
|
Matches `BASE_FROM_SET`.
|
|
For clang-format not to wrap definitions.
|
|
TH_BACK was being used when drawing the 3D view even though
there was no way to set the color in the preferences.
The color was zero'd when moving to the new 2.8x theme.
Having both gradient and background colors was confusing,
especially having to use 'TH_HIGH_GRAD' for the 3D view, 'TH_BACK' for
other views.
Move the background color back to 'TH_BACK', 'TH_BACK_GRAD' is used
when gradients are enabled.
RNA is unchanged so presets don't need updating.
|
|
|
|
Needed for clang formatting to workaround bug/limit, see: T53211
|
|
Even though the fragment shader was already discarding all members of
dof_bokeh_sides when blades was zero, the C code was still trying to
use this for a few divisions leading to runtime asserts.
Those are harmless yet can lead some to waste time while pursuiting
other bugs (namely a near freeze when blades aspect ratio is too low).
|
|
|
|
|
|
|
|
|
|
|
|
Also (mostly in comments): behaviour -> behavior (we use American English).
|
|
Also contains some code typo fixes (mostly, adtaptative -> adaptive,
former is nearly innexistant in English, let's stick to simple valid
words ;) ).
|
|
Object visibility is now handled by the depsgraph iterator, but this API
was incomplete as it made no distinction for visibility of the object itself,
particles and generated instances.
The depsgraph iterator API now includes information about which part of the
object is visible, and this is used by Cycles to replace the old custom logic.
Cycles and EEVEE visibility should now be consistent, which unfortunately does
means some subtle compatibility breakage for both.
Fixes T58956, T58202, T59284.
Differential Revision: https://developer.blender.org/D4109
|
|
Overlay options shouldn't be used when overlays are disabled.
Move to shading popover, reported as T58070.
|
|
|
|
This now only upload data per loops to the GPU, making use of index buffer
to draw polygon. This make use of the vertex cache, speed up renders
and saves a lot of vram.
Update performance is also slightly faster and can even be improved further
by updating only uvs or vcol independently.
This commits breaks texture paint batches. It will be added back in another
commit.
|
|
This changes the bent normal effect to be a bit more subtle.
I also tuned down the bent normal blending factor so mesh faceted look may
appear more in occluded regions. this is to increase the fidelity of the
indirect lighting. This blending might be a parameter in the future.
Based the calculation on "Bent Normals and Cones in Screen-space"
by O. Klehm, T. Ritschel, E. Eisemann, H.-P. Seidel
|
|
- Clear deprecated flags for ID's:
Scene, Sequence, World, Object & Mesh.
- Clear deprecated flags for Spaces: outliner, 3D view & image.
- Remove unused `Mesh.drawflag`
- Remove unused `USER_ALLWINCODECS`, `USER_MMB_PASTE`.
- Remove `V3D_SOLID_TEX` & `V3D_ZBUF_SELECT` - used in a few areas.
- Flip `Object.empty_image_visibility_flag`
(avoids do-version on each new flag)
- Rename 'Backside' -> 'Back' in context of drawing - showing 'Back'
makes sense.
|
