| Age | Commit message (Collapse) | Author |
|---|
|
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
|
|
Dashed line display was changed since 2.7x, using white on black
instead of grey on black.
This made selection difficult to see as white is brighter
than the default selected color.
Match the grey used in 2.7x.
|
|
|
|
Part of T91671.
Not much else to say, this is mainly a massive deletion of code.
Note that a few cleanups possible after this proxy removal were kept out
of this commit to try to reduce a bit its size.
Reviewed By: sergey, brecht
Maniphest Tasks: T91671
Differential Revision: https://developer.blender.org/D13995
|
|
These aren't used for picking bones so there is no need to draw them.
|
|
In order to use a workaround builtin uniform, we need to count it
just like other uniforms and give it some space in the name buffer.
This also fixes extensions being added after the uniform declaration.
All `#extension` directives are now part of the gl backend.
|
|
The evaluated mesh is a result of evaluated modifiers, and referencing
other evaluated IDs such as materials.
It can not be stored in the EditMesh structure which is intended to be
re-used by many areas. Such sharing was causing ownership errors causing
bugs like
T93855: Cycles crash with edit mode and simultaneous viewport and final render
The proposed solution is to store the evaluated edit mesh and its cage in
the object's runtime field. The motivation goes as following:
- It allows to avoid ownership problems like the ones in the linked report.
- Object level is chosen over mesh level is because the evaluated mesh
is affected by modifiers, which are on the object level.
This patch allows to have modifier stack of an object which shares mesh with
an object which is in edit mode to be properly taken into account (before
the change the modifier stack from the active object will be used for all
objects which share the mesh).
There is a change in the way how copy-on-write is handled in the edit mode to
allow proper state update when changing active scene (or having two windows
with different scenes). Previously, the copt-on-write would have been ignored
by skipping tagging CoW component. Now it is ignored from within the CoW
operation callback. This allows to update edit pointers for objects which are
not from the current depsgraph and where the edit_mesh was never assigned in
the case when the depsgraph was evaluated prior the active depsgraph.
There is no user level changes changes expected with the CoW handling changes:
should not affect on neither performance, nor memory consumption.
Tested scenarios:
- Various modifiers configurations of objects sharing mesh and be part of the
same scene.
- Steps from the reports: T93855, T82952, T77359
This also fixes T76609, T72733 and perhaps other reports.
Differential Revision: https://developer.blender.org/D13824
|
|
Custom bones are drawn by instancing the GPUBatch of the base object. To
access the mesh and its GPUBatch, `BKE_object_get_evaluated_mesh` was
used. However, since GPU subdivision support, this will return a
subdivision wrapper which will never be drawn, and thus will have an
invalid batch, which caused the crash.
`BKE_object_get_evaluated_mesh_no_subsurf` should be used instead, to
return the mesh that will be drawn, and have the subdivision evaluated
on the GPU. Note that the rest of the draw code is already using this
function.
|
|
This adds vertex creasing support for OpenSubDiv for modeling, rendering,
Alembic and USD I/O.
For modeling, vertex creasing follows the edge creasing implementation with an
operator accessible through the Vertex menu in Edit Mode, and some parameter in
the properties panel. The option in the Subsurf and Multires to use edge
creasing also affects vertex creasing.
The vertex crease data is stored as a CustomData layer, unlike edge creases
which for now are stored in `MEdge`, but will in the future also be moved to
a `CustomData` layer. See comments for details on the difference in behavior
for the `CD_CREASE` layer between egdes and vertices.
For Cycles this adds sockets on the Mesh node to hold data about which vertices
are creased (one socket for the indices, one for the weigths).
Viewport rendering of vertex creasing reuses the same color scheme as for edges
and creased vertices are drawn bigger than uncreased vertices.
For Alembic and USD, vertex crease support follows the edge crease
implementation, they are always read, but only exported if a `Subsurf` modifier
is present on the Mesh.
Reviewed By: brecht, fclem, sergey, sybren, campbellbarton
Differential Revision: https://developer.blender.org/D10145
|
|
MSVC used to warn about const mismatch for arguments passed by value.
Remove these as newer versions of MSVC no longer show this warning.
|
|
When weight painting the bone overlay is extremely intrusive,
effectively requiring either extensive use of hiding individual
bones, or disabling the whole bone overlay between selections.
This addresses the issue by adding a bone opacity slider that
is used for the 'wireframe' armature drawing mode. It directly
controls the uniform opacity as a straightforward option.
Differential Revision: https://developer.blender.org/D11804
|
|
This evaluator is used in order to evaluate subdivision at render time, allowing for
faster renders of meshes with a subdivision surface modifier placed at the last
position in the modifier list.
When evaluating the subsurf modifier, we detect whether we can delegate evaluation
to the draw code. If so, the subdivision is first evaluated on the GPU using our own
custom evaluator (only the coarse data needs to be initially sent to the GPU), then,
buffers for the final `MeshBufferCache` are filled on the GPU using a set of
compute shaders. However, some buffers are still filled on the CPU side, if doing so
on the GPU is impractical (e.g. the line adjacency buffer used for x-ray, whose
logic is hardly GPU compatible).
This is done at the mesh buffer extraction level so that the result can be readily used
in the various OpenGL engines, without having to write custom geometry or tesselation
shaders.
We use our own subdivision evaluation shaders, instead of OpenSubDiv's vanilla one, in
order to control the data layout, and interpolation. For example, we store vertex colors
as compressed 16-bit integers, while OpenSubDiv's default evaluator only work for float
types.
In order to still access the modified geometry on the CPU side, for use in modifiers
or transform operators, a dedicated wrapper type is added `MESH_WRAPPER_TYPE_SUBD`.
Subdivision will be lazily evaluated via `BKE_object_get_evaluated_mesh` which will
create such a wrapper if possible. If the final subdivision surface is not needed on
the CPU side, `BKE_object_get_evaluated_mesh_no_subsurf` should be used.
Enabling or disabling GPU subdivision can be done through the user preferences (under
Viewport -> Subdivision).
See patch description for benchmarks.
Reviewed By: campbellbarton, jbakker, fclem, brecht, #eevee_viewport
Differential Revision: https://developer.blender.org/D12406
|
|
Also add groups in some files.
|
|
Ref T92709
|
|
In the original design draw engines had to copy with a limitation that
they were not allowed to reuse complex data structures between drawing
calls. Data that could be reused were limited to:
- GPUFramebuffers
- GPUTextures
- Memory that could be removed calling MEM_freeN (storage list)
- DRWPass
This is fine when the storage list contains arrays or structs but when
more complex data types (vectors, maps) etc wasn't possible.
This patch adds instance_data that can be reused between drawing calls.
The instance_data is controlled by the draw engine and doesn't need to
be limited as described above.
When an engines stores instance_data it must implement the
`DrawEngineType.instance_free` callback to free the data.
The patch originates from eevee rewrite. But was added to master as the
image engine rewrite also has a need for it.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13425
|
|
Wire-only meshes have a special case in the overlay drawing to give
the wire shader a special color (which avoids the lines being dashed,
somehow). The fast path for duplis didn't have that special case.
Differential Revision: https://developer.blender.org/D13196
|
|
The problem is that drw_batch_cache_generate_requested_delayed
is called on the object, which uses the original object data type to
choose which data type to get info for. So for curves and text it uses
the incorrect type (not the evaluated mesh like we hardcoded in the
armature overlay code).
To fix this I hardcoded the "delayed" generation to only use the
evaluated mesh. Luckily it wasn't use elsewhere besides this
armature overlay system. That seems like the simplest fix for
3.0. A proper solution should rewrite this whole area anyway.
Differential Revision: https://developer.blender.org/D13439
|
|
This part of the drawing code assumes that the bone custom object
has only one evaluated geometry component, and it also uses the
object type to check which data to draw, with the functions like
`DRW_cache_object_surface_get` that just take an object input.
Those functions usually work on evaluated objects, which use the
instancing system to access a temporary object with `object.data`
replaced for data types that don't match the original object.
That assumption used to work, but now curve, point cloud, or volume
objects can have an evaluated mesh which is not accessed with the
same object for render engine drawing.
The "correct" solution for the way this code is structured would be to
loop through all of the geometry components and try to get GPU batches
from every one of them. However, that significantly increases complexity
in an area that should probably be refactored anyway. This patch treats
the mesh as a special case, and only draws the evaluated mesh.
The **best** solution in my opinion might be refactoring this area to
use the instancing system with some sort of viewport-only flag so
the custom shape instances aren't added in the render.
The solution is "partial" because the "Wireframe" option only works
for meshes from mesh objects, even after this fix, and because other
data besides meshes is not displayed at all.
Differential Revision: https://developer.blender.org/D13038
|
|
With instancing becoming more common with geometry nodes,
instances are less of a separate thing and more of an essential part
of evaluated data. Displaying them with a separate outline, while
helpful in some cases, is not worth the lack of visibility or confusion
about selected/active status. Information about the performance
of the scene due to instancing is always available with the statistics
like vertex count, etc.
The problems were compounded by the fact that the instancing
system is used to output geometry components that don't correspond
to the object's original type. So this patch also fixes that problem.
Fixes T92079, T81010
Ref T91310
Differential Revision: https://developer.blender.org/D13133
|
|
|
|
Lattice wires are drawn as part of "Extras". Unlike the other types
details (Cameras, Lights, Lightprobes and Speakers), Lattices actually
have boundingboxes defined, so hide the lattice wires if only the
boundingbox is requested.
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11343
|
|
This adjusts some calculations and visibility flags for XR viewports in
order to account for a possible scale factor in the XR view matrix.
This scale factor can be introduced via the XR session settings base
scale, which allows a viewer to begin their session at a specific
reference scale, or the XR session state navigation scale, which allows
a viewer to adjust their scale relative to the reference scale during
the session.
Reviewed by Severin as part of D11501, but requested to be committed
separately.
|
|
This was caused by camera background being rendered in world space, causing
floating point imprecision issues when camera was far from origin.
Adding a uniform to change vertex shader to process everything in viewspace
to fix the problem.
|
|
Match API naming prefix (BKE_vfont_*) and DNA_vfont_types.h.
|
|
Implements T89789, T89792, custom grid (described as dynamic grid in
T78389) and UV grid snapping (T78391)
Replaces the default UV editor grid with 2 new types of grid :
* Custom grid: Allows the user to create an NxN grid, where the value
of N is specified by the user.
* Subdividing grid: Subdivides the UV editor grid when the user
zooms in the viewport and vice versa when zooming out.
UV snapping improvements :
* Increment snapping: Increment values for snapping are calculated based
on which grid type is being used in the UV editor
(subdividing or custom). In general the increment value is equal to
the distance between 2 visible grid lines.
* Absolute grid snap: New toggle added to increment snapping option in
the UV editor, allows UV grid snapping during translation.
Reviewed By: campbellbarton
Ref D12684
|
|
|
|
Using a RenderResult (or a Viewer) was never really working (think you
cant get a real ImBuff from these) -- cannot use it as a clone, stencil
or canvas [Single Image paint texture slot].
In the case of using it as a 2D paint clone image this would also crash
[due to the Image Editor drawing refactor in 2.91].
Now [in the spirit of T73182 / D11179], prevent using these where
unappropriate by using rna pointer polling functions.
Also add a security check for the 2D paint clone image crash in case a
stencil ImBuff cannot be provided for some reason, but generally old
files are now patched in do_versions_after_linking_300 (thx @brecht!).
Fixes T91625.
Maniphest Tasks: T91625
Differential Revision: https://developer.blender.org/D12609
|
|
With this commit, curve objects support the geometry nodes modifier.
Curves objects now evaluate to `CurveEval` unless there was a previous
implicit conversion (tessellating modifiers, mesh modifiers, or the
settings in the curve "Geometry" panel). In the new code, curves are
only considered to be the wire edges-- any generated surface is a mesh
instead, stored in the evaluated geometry set.
The consolidation of concepts mentioned above allows remove a lot of
code that had to do with maintaining the `DispList` type temporarily
for modifiers and rendering. Instead, render engines see a separate
object for the mesh from the mesh geometry component, and when the
curve object evaluates to a curve, the `CurveEval` is always used for
drawing wire edges.
However, currently the `DispList` type is still maintained and used as
an intermediate step in implicit mesh conversion. In the future, more
uses of it could be changed to use `CurveEval` and `Mesh` instead.
This is mostly not changed behavior, it is just a formalization of
existing logic after recent fixes for 2.8 versions last year and two
years ago. Also, in the future more functionality can be converted
to nodes, removing cases of implicit conversions. For more discussion
on that topic, see T89676.
The `use_fill_deform` option is removed. It has not worked properly
since 2.62, and the choice for filling a curve before or after
deformation will work much better and be clearer with a node system.
Applying the geometry nodes modifier to generate a curve is not
implemented with this commit, so applying the modifier won't work
at all. This is a separate technical challenge, and should be solved
in a separate step.
Differential Revision: https://developer.blender.org/D11597
|
|
|
|
Allow the UDIM grid to be shown and adjusted when there are images
loaded in UV edit mode. Right now the grid feature disappears once an
image is loaded and many have found this to be confusing.
Based on community and artist feedback, there was support to change this
behavior[1]
This patch does the following:
- Allows the grid to be shown even when images are present
- The max allowable dimensions for the grid has been increased from
10x10 to 10x100 to match the underlying maximum UDIM range that blender
supports
Note: This should not affect other Image editor modes like Paint/Mask or
the Render Result viewer etc. Future work in this area is currently
documented in a dedicated design task[2]
[1] https://devtalk.blender.org/t/the-udim-tile-grid-design-and-feedback-thread/20136
[2] https://developer.blender.org/T90913
Differential Revision: https://developer.blender.org/D11860
|
|
Crash introduced by {rB8e00db42961297facd521139762fe8c42042fc5c}, fixed
with a null check. Object can be null.
|
|
When the object display type was set to wireframe or boundbox the depth
buffer wasn't updated resulting in not visible weightpaint overlay.
Thanks to Demeter Dzadik for mentioning it.
|
|
|
|
Remove redundant code for drawing text strings that contain only ASCII.
See D12293 for much more detail.
Differential Revision: https://developer.blender.org/D12293
Reviewed by Campbell Barton
|
|
This was working differently in 2.79, tried tracking this down and it
seems this was wrong since the 2.8 beginning in {rB7907dfc40018}.
This would not only crash without an active scene camera, but would also
result in different tracks from different camera's constraints could not
be selected.
So select id depends on corresponding camera, remove the dependency on
scene camera completely.
Maniphest Tasks: T90651
Differential Revision: https://developer.blender.org/D12230
|
|
Master multiplied the weight paint on top of the rendered image. This
reduced readability.
This patch removes the multiplication for weight painting and adds a
hint of the geometry below the overlay.
Reviewed By: Mets, pablodp606, campbellbarton
Maniphest Tasks: T73434
Differential Revision: https://developer.blender.org/D12170
|
|
When using wireframe opacity, the paint overlay needs to be drawn
before the wireframes in order to alpha blend correctly.
Sculpt overlays were also affected by this, so this commit refactors
this part of the code in case other overlays needs to be added in
the future.
Reviewed By: Mets
Differential Revision: https://developer.blender.org/D12235
|
|
Add Apply Constraint, Duplicate Constraint, and Copy To Selected
operators, and include them in a menu similar to the menu for modifiers.
The shortcuts in the extras menu are also matched to modifiers.
All the here added operators are intended to work exactly like the
analogous ones for modifiers. That means the apply operator should apply
a constraint as if it was first in the list, just like modifiers do. I
have added the same warning message as for modifiers when that happens.
The decision to use this approach of appling the constraint as if it was
first, was made for consistency with modifiers. People are already used
to how it works there. Is also provides more intricate control over the
applied transforms, then just applying all constraints up to that one.
Apply all constraints is already kinda implemented in Bake Animation.
Reviewed By: HooglyBoogly, sybren, #user_interface
Differential Revision: https://developer.blender.org/D10914
|
|
|
|
Patch for: T37878
{F10169694}
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D11487
|
|
|
|
|
|
|
|
This shows the text as part of the assertion message.
|
|
|
|
This commit moves the storage of `bDeformGroup` and the active index
to `Mesh`, `Lattice`, and `bGPdata` instead of `Object`. Utility
functions are added to allow easy access to the vertex groups given
an object or an ID.
As explained in T88951, the list of vertex group names is currently
stored separately per object, even though vertex group data is stored
on the geometry. This tends to complicate code and cause bugs,
especially as geometry is created procedurally and tied less closely
to an object.
The "Copy Vertex Groups to Linked" operator is removed, since they
are stored on the geometry anyway.
This patch leaves the object-level python API for vertex groups in
place. Creating a geometry-level RNA API can be a separate step;
the changes in this commit are invasive enough as it is.
Note that opening a file saved in 3.0 in an earlier version means
the vertex groups will not be available.
Differential Revision: https://developer.blender.org/D11689
|
|
Only DNA_customdata_types.h is needed for BMEditMesh.
|
|
|
|
Renamed to BKE_gpencil_visible_stroke_advanced_iter
Also created a simple version of the iterator to be used without multiframe and onion skin.
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
