| Age | Commit message (Collapse) | Author |
|---|
|
This is part of the effor to simplify the View struct in order to implement
multiview rendering.
The viewvecs can easilly be replace by projection matrix operation.
Even if slightly more complex, there is no performance impact.
|
|
|
|
name collision.
For the Metal shader translation support for shader-global uniforms are remapped via macro's, and in such cases where a uniform name matches a vertex attribute name, compilation errors will occur due to this injected syntax being incompatible with the immediate code.
Also adding source-level function interface alternatives where sized arrays are passed in. These are not supported directly in Metal shading language and are instead handled as pointers. These pointers require explicit address-space qualifiers in some cases, if device/constant address space memory is passed into the function.
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15898
|
|
|
|
Also add missing task-ID reference & remove colon after \note as it
doesn't render properly in doxygen.
|
|
|
|
Undefined behaviour for divergent control-flow fixes, replacement for partial vector references, and resolution of a number of calculation precision issues occuring on macOS.
Authored by Apple: Michael Parkin-White
Ref: T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14437
|
|
- Missing star prefix.
- Unnecessary indentation.
- Blank line after dot-points
(otherwise doxygen merges with the previous dot-point).
- Use back-slash for doxygen commands.
- Correct spelling.
|
|
MSL does not have an implicit global scope, this is emulated via macro's adding an indirection for uniforms, attributes, shader stage inputs and outputs such as:
#define roughness shaderinst->roughness.
Variables in GLSL which exist within uniform blocks can be directly referenced via the global scope, unlike standard C++. This means that variable name pollution occurs if subsequent local variables in the code use the same name, resulting in compilation errors.
A number of these conflicting names have been renamed to ensure unique naming and no further scope pollution.
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14452
|
|
Metal shading language follows the C++ 14 standard and in some cases requires a greater level of explicitness than GLSL. There are also some small language differences:
- Explicit type-casts (C++ requirements)
- Explicit constant values (C++ requirements, e.g. floating point values using 0.0 instead of 0).
- Metal/OpenGL compatibility paths
- GLSL Function prototypes
- Explicit accessors for vector types when sampling textures.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14378
|
|
|
|
|
|
This avoid making include mistake and potentially detect areas that do
not really need common_view_lib.glsl.
|
|
This avoid uneeded resource binds.
|
|
This is too much impractical and offers no real benefit.
|
|
Also adds a few things to GPUShader for easily create shaders.
Heavy usage of macros to compose the createInfo and avoid
duplications and copy paste bugs.
This makes the link between the shader request functions
(in workbench_shader.cc) and the actual createInfo a bit
obscure since the names are composed and not searchable.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D13910
|
|
This is to be able to turn off the extension usage on demand.
|
|
In order to use a workaround builtin uniform, we need to count it
just like other uniforms and give it some space in the name buffer.
This also fixes extensions being added after the uniform declaration.
All `#extension` directives are now part of the gl backend.
|
|
This reverts commit edee5a947b7ea3e1324aa334a22c7c9bbf47f5f7.
Fixes compilation error (Missing file BLI_float2.hh)
|
|
This reverts commit 8fb2ff458ba579dba08bfdf57d043ad158b5db07.
Missing some files.
|
|
This is a first part of the Shader Create Info system could be.
A shader create info provides a way to define shader structure, resources
and interfaces. This makes for a quick way to provide backend agnostic
binding informations while also making shader variations easy to declare.
- Clear source input (only one file). Cleans up the GPU api since we can create a
shader from one descriptor
- Resources and interfaces are generated by the backend (much simpler than parsing).
- Bindings are explicit from position in the array.
- GPUShaderInterface becomes a trivial translation of enums and string copy.
- No external dependency to third party lib.
- Cleaner code, less fragmentation of resources in several libs.
- Easy to modify / extend at runtime.
- no parser involve, very easy to code.
- Does not hold any data, can be static and kept on disc.
- Could hold precompiled bytecode for static shaders.
This also includes a new global dependency system.
GLSL shaders can include other sources by using #pragma BLENDER_REQUIRE(...).
This patch already migrated several builtin shaders. Other shaders should be migrated
one at a time, and could be done inside master.
There is a new compile directive `WITH_GPU_SHADER_BUILDER` this is an optional
directive for linting shaders to increase turn around time.
What is remaining:
- pyGPU API {T94975}
- Migration of other shaders. This could be a community effort.
Reviewed By: jbakker
Maniphest Tasks: T94975
Differential Revision: https://developer.blender.org/D13360
|
|
|
|
Contributed by luzpaz.
Differential Revision: https://developer.blender.org/D13264
|
|
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
|
|
This improves stability and convergence speed of Workbench Temporal AntiAliasing.
This adds a filtering kernel (blackmann-haris, same as EEVEE/Cycles) to the
temporal antialiasing sampling. We also gather neighbor pixels since they might
end up in the pixel footprint.
We use a 1px radius for the filter window which is a bit less than the 1.5 default
of cycles and EEVEE since it does blur quite a bit more than what we have now.
Another improvement is that the filtering is now in log space which improves
AntiAliasing around highlights.
Theses improvement may not be very useful for every day case but it was an
experiment to try to make TAA usable for GPencil.
Test file used :
{F9798807}
|filtered+logspace|filtered|original|
|{F9798847}|{F9798848}|{F9798849}|
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D10414
|
|
This is a complete refactor over the old system. The goal was to increase quality
first and then have something more flexible and optimised.
|{F9603145} | {F9603142}|{F9603147}|
This fixes issues we had with the old system which were:
- Too much overdraw (low performance).
- Not enough precision in render targets (hugly color banding/drifting).
- Poor resolution near in-focus regions.
- Wrong support of orthographic views.
- Missing alpha support in viewport.
- Missing bokeh shape inversion on foreground field.
- Issues on some GPUs. (see T72489) (But I'm sure this one will have other issues as well heh...)
- Fix T81092
I chose Unreal's Diaphragm DOF as a reference / goal implementation.
It is well described in the presentation "A Life of a Bokeh" by Guillaume Abadie.
You can check about it here https://epicgames.ent.box.com/s/s86j70iamxvsuu6j35pilypficznec04
Along side the main implementation we provide a way to increase the quality by jittering the
camera position for each sample (the ones specified under the Sampling tab).
The jittering is dividing the actual post processing dof radius so that it fills the undersampling.
The user can still add more overblur to have a noiseless image, but reducing bokeh shape sharpness.
Effect of overblur (left without, right with):
| {F9603122} | {F9603123}|
The actual implementation differs a bit:
- Foreground gather implementation uses the same "ring binning" accumulator as background
but uses a custom occlusion method. This gives the problem of inflating the foreground elements
when they are over background or in-focus regions.
This is was a hard decision but this was preferable to the other method that was giving poor
opacity masks for foreground and had other more noticeable issues. Do note it is possible
to improve this part in the future if a better alternative is found.
- Use occlusion texture for foreground. Presentation says it wasn't really needed for them.
- The TAA stabilisation pass is replace by a simple neighborhood clamping at the reduce copy
stage for simplicity.
- We don't do a brute-force in-focus separate gather pass. Instead we just do the brute force
pass during resolve. Using the separate pass could be a future optimization if needed but
might give less precise results.
- We don't use compute shaders at all so shader branching might not be optimal. But performance
is still way better than our previous implementation.
- We mainly rely on density change to fix all undersampling issues even for foreground (which
is something the reference implementation is not doing strangely).
Remaining issues (not considered blocking for me):
- Slight defocus stability: Due to slight defocus bruteforce gather using the bare scene color,
highlights are dilated and make convergence quite slow or imposible when using jittered DOF
(or gives )
- ~~Slight defocus inflating: There seems to be a 1px inflation discontinuity of the slight focus
convolution compared to the half resolution. This is not really noticeable if using jittered
camera.~~ Fixed
- Foreground occlusion approximation is a bit glitchy and gives incorrect result if the
a defocus foreground element overlaps a farther foreground element. Note that this is easily
mitigated using the jittered camera position.
|{F9603114}|{F9603115}|{F9603116}|
- Foreground is inflating, not revealing background. However this avoids some other bugs too
as discussed previously. Also mitigated with jittered camera position.
|{F9603130}|{F9603129}|
- Sensor vertical fit is still broken (does not match cycles).
- Scattred bokeh shapes can be a bit strange at polygon vertices. This is due to the distance field
stored in the Bokeh LUT which is not rounded at the edges. This is barely noticeable if the
shape does not rotate.
- ~~Sampling pattern of the jittered camera position is suboptimal. Could try something like hammersley
or poisson disc distribution.~~Used hexaweb sampling pattern which is not random but has better
stability and overall coverage.
- Very large bokeh (> 300 px) can exhibit undersampling artifact in gather pass and quite a bit of
bleeding. But at this size it is preferable to use jittered camera position.
Codewise the changes are pretty much self contained and each pass are well documented.
However the whole pipeline is quite complex to understand from bird's-eye view.
Notes:
- There is the possibility of using arbitrary bokeh texture with this implementation.
However implementation is a bit involved.
- Gathering max sample count is hardcoded to avoid to deal with shader variations. The actual
max sample count is already quite high but samples are not evenly distributed due to the
ring binning method.
- While this implementation does not need 32bit/channel textures to render correctly it does use
many other textures so actual VRAM usage is higher than previous method for viewport but less
for render. Textures are reused to avoid many allocations.
- Bokeh LUT computation is fast and done for each redraw because it can be animated. Also the
texture can be shared with other viewport with different camera settings.
|
|
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
Following the most widely used convention for including todo's in
the code, that is: `TODO(name):`, `FIXME(name)` ... etc.
|
|
The output layout was wrong and it's a mistery why it works on most
implementations since it's clearly a wrong usage.
Thanks @sebbas for helping narrowing down the issue.
|
|
All the changes made in the branch `soc-2020-fluid-tools` are included in this patch.
**Major changes:**
=== Viewport Display ===
- //Raw voxel display// or //closest (nearest-neighbor)// interpolation for displaying the underlying voxel data of the simulation grids more clearly.
- An option to display //gridlines// when the slicing method is //single//.
==== Grid Display ====
- Visualization for flags, pressure and level-set representation grids with a fixed color coding based on Manta GUI.
==== Vector Display ====
- //**M**arker **A**nd **C**ell// grid visualization options for vector grids like velocity or external forces.
- Made vector display options available for external forces.
==== Coloring options for //gridlines// ====
- Range highlighting and cell filtering options for displaying the simulation grid data more precisely.
- Color gridlines with flags.
- Also, made slicing and interpolation options available for Volume Object.
Reviewed By: JacquesLucke, sebbas
Differential Revision: https://developer.blender.org/D8705
|
|
This is a fixup to rB7710de26d0d768734977769af4a278b262f4da51
|
|
On MacOS + Intel Iris Graphics 6100 (may affect other config too), the
texelFetch operation bypass the base mip setting of the texture object.
Using textureLod with lod = 0.0 ensure the lowest (after clamping) mip will
always be selected.
Also disable the texture filtering for this sampler to avoid unecessary
fetches.
This should fix T78653 Blender 2.83 broken Depth of Field in Viewport
|
|
Rendering only to the depth buffer seems to need a valid fragment shader
with a color output on some platform.
|
|
Default mesa driver for ubuntu 20.04 fails when a name is defined twice.
M_PI is defined in both `common_workbench_lib` and `common_math_lib`. This patch
remove the define out of common_workbench_lib
For reference it fails on https://github.com/mesa3d/mesa/blob/mesa-20.0.8/src/compiler/glsl/glcpp/glcpp-parse.y#L1186
during the check if the macros are the same.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8741
|
|
Depth of field compilation failed due to recent refactoring. This only
happened in blender 2.91. This change uses the shader lib to find
dependencies.
|
|
|
|
|
|
- add the use of DRWShaderLibrary to EEVEE's glsl codebase to reduce code
complexity and duplication.
- split bsdf_common_lib.glsl into multiple sub library which are now shared
with other engines.
- the surface shader code is now more organised and have its own files.
- change default world to use a material nodetree and make lookdev shader
more clear.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D8306
|
|
|
|
Also includes outline overlays. Removes the temp overlay drawing
We make the geometry follow camera like billboards this uses less
geometry. Currently we use half octahedron for now. Goal would be
to use icospheres.
This patch also optimize the case when pointcloud has uniform radius.
However we should premultiply the radius prop by the default radius
beforehand to avoid a multiplication on CPU.
Using geometry instead of pseudo raytraced spheres is more scalable as
we can render as low as 1 or 2 triangle to a full half sphere and can
integrate easily in the render pipeline using a low amount of code.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8301
|
|
|
|
This adds the opportunity to use it in multiple places.
|
|
|
|
And also remove some sRGB hack.
|
|
This removes some fragment shader hacks and improve the support of
different repeat & filtering modes.
This fix T77453 Image texture not repeating in viewport
|
|
|
|
|
