Age | Commit message (Collapse) | Author |
|
|
|
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
|
|
Currently B-Bone scaling can only be controlled via their
properties, thus requiring up to 8 drivers per joint between
B-Bones to transfer scaling factors from the handle bone.
A Scale Easing option is added to multiply the easing value
by the Y scale channels to synchronize them - this produces a
natural scaling effect where both the shape of the curve and
the scale is affected.
In addition, four toggles are added for each handle, which
multiply each of the X, Y, Z and Ease values by the matching
Local Scale channel of the handle bone, thus replacing trivial
drivers. The Scale Easing option has no effect on this process
since it's easy to just enable both Length and Ease buttons.
Differential Revision: https://developer.blender.org/D9870
|
|
In addition to the base bone transformation itself, B-Bones have
controls that affect transformation of its segments. For rotation
the features are quite complete, allowing to both reorient the
Bezier handles via properties, and to control them using custom
handle bones. However for scaling there are two deficiencies.
First, there are only X and Y scale factors (actually X and Z),
while lengthwise all segments have the same scaling. The ease
option merely affects the shape of the curve, and does not cause
actual scaling.
Second, scaling can only be controlled via properties, thus
requiring up to 6 drivers per joint between B-Bones to transfer
scaling factors from the handle bone. This is very inefficient.
Finally, the Z channels are confusingly called Y.
This commit adds a B-Bone Y Scale channel and extra B-Bone flag
fields to DNA with appropriate versioning (including for F-Curves
and drivers) in preparation to addressing these limitations.
Functionality is not changed, so the new fields are not used
until the following commits.
Differential Revision: https://developer.blender.org/D9870
|
|
|
|
These were limited to obvious cases. Some less obvious cases
were kept as refactoring might make them necessary in future.
|
|
This moves the flash on mode transfer effect option from the overlays to
an operator property of the mode transfer operator.
- This effect is intended to show the target object when no overlays or
a minimal set of overlays is enabled. Making it part of the whole set of
overlays invalidates this use case.
- The effect is not intended to be configurable per viewport, it should
be a global option.
The effect is still implemented using the overlay engine (instead of a
draw modal callback) due to performance and drawing artifacts. Having it
implemented as an overlay with runtime timer data in the objects makes
also possible to run multiple animations at the same time without any
visual glitches.
Reviewed By: campbellbarton, JulienKaspar
Differential Revision: https://developer.blender.org/D11519
|
|
|
|
This implements T87633
This overlay renders a flash animation on the target object when
transfering the mode to it using the mode transfer operator.
This provides visual feedback when switching between objects without
extra overlays that affect the general color and lighting in the scene.
Differences with the design task:
- This uses just a fade out animation instead of a fade in/out animation.
The code is ready for fade in/out, but as the rest of the overlays
(face sets, masks...) change instantly without animation, having a fade
in/out effect gives the impression that the object flashes twice (once
for the face sets, twice for the peak alpha of the flash animation).
- The rendering uses a flat color without fresnel for now, but this can
be improved in the future to make it look more like the shader in the
prototype.
- Not enabled by default (can be enabled in the overlays panel), maybe
the defaults can change for 3.0 to disable fade inactive and enable this
instead.
Reviewed By: jbakker, JulienKaspar
Differential Revision: https://developer.blender.org/D11055
|
|
Follow own code style docs.
|
|
EEVEE uses hashing to sync aov names and types with the gpu.
For the type a hashed value was overridden making `decalA`
and `decalB` choose the same hash. This patches fixes this
by removing the most significant bit.
|
|
This reverts commit 730a46e87d261543c9550ddef406894e14d5bea6.
|
|
EEVEE uses hashing to sync aov names and types with the gpu. For the type a hashed value was overridden making `decalA` and `decalB` choose the same hash. This patches fixes this by removing the most significant bit.
|
|
|
|
|
|
This was caused by unsafe sqrt calls.
Fixes T86578 white artifacts in EEVEE
Reviewed By: brecht, dfelinto
Differential Revision: https://developer.blender.org/D11428
|
|
When using ``Path`` alignment, if the stroke has one point the texture rotates randomly when move the viewport. This was because with one point is impossible to calculate a path.
Now, if the stroke has only one point, the texture for this stroke is aligned to Object.
|
|
|
|
Both before and after can have artifacts with some normal maps, but this seems to give
worse artifacts on average which are not worth the minor performance increase.
This reverts commit 5c4d24e1fd752a8a89d44d05e8e3f9b31f2d7db0.
Ref T88368, D10084
|
|
Event though in practice this wasn't causing problems as the fixed size
buffers are generally large enough not to truncate text.
Using the result from `snprint` or `BLI_snprintf` to step over a fixed
size buffer allows for buffer overruns as the returned value is the size
needed to copy the entire string, not the number of bytes copied.
Building strings using this convention with multiple calls:
ofs += BLI_snprintf(str + ofs, str_len_max - ofs);
.. caused the size argument to become negative,
wrapping it to a large value when cast to the unsigned argument.
|
|
This patch adds an option in the Layers > Relations panel called "Disable Masks in Render".
When checked, no masks on this layer are included in the render.
Example:
| {F10087680} | {F10087681} |
See T88202 for why this is needed.
Reviewed By: antoniov
Maniphest Tasks: T88202
Differential Revision: https://developer.blender.org/D11234
|
|
Issue is that due to the strange definition of render in grease pencil
(meaning should be rendered similar to rendering). This included normal
viewport rendering in OB_RENDER and OpenGL render in OB_RENDER.
For other rendering modes the overlay vertex opacity would be used. This
patch sets this value to 1 when rendering via a scene strip override.
NOTE: that this isn't a good solution as I expect that users want to use
the opacity of the Grease pencil object. Perhaps the GPencil team has a
better solution for it.
|
|
This commit allows that the evaluated geometry of an object has
different materials from the original geometry. This is needed
for geometry nodes.
The main thing that changes for render engines and exporters
is that the number of material slots on an object and its geometry
might not match anymore. For original data, the slot counts are
still equal, but not for evaluated data.
Accessing material slots though rna stays the same. The behavior
adapts automatically depending on whether the object is evaluated.
When accessing materials of an object through `BKE_object_material_*`
one has to use a new api for evaluated objects:
`BKE_object_material_get_eval` and `BKE_object_material_count_eval`.
In the future, the different behavior might be hidden behind a more
general C api, but that would require quite a few more changes.
The ground truth for the number of materials is the number of materials
on the geometry now. This is important in the current design, because
Eevee needs to know the number of materials just based on the mesh in
`mesh_render_mat_len_get` and similar places.
In a few places I had to add a special case for mesh edit mode to get it
to work properly. This is unfortunate, but I don't see a way around that
for now.
Differential Revision: https://developer.blender.org/D11236
|
|
|
|
When filtering the render using view layer, could be possible the mask is NULL and just need to be ignored.
|
|
|
|
|
|
This was a bug uncovered by rB50782df42586.
Previously, the lightcache was always discarded between redraw and forced
to be updated again.
Now we check for update inside the render loop making it compatible with
accumulation motion blur and long exposure.
|
|
|
|
This was caused by the slight focus gather not being wide enough
for small radii. Now the cast to int will properly round the radius to
the nearest integer.
This is related to T86244 Black Artefacts in EEVEE on Transparent BSDF
|
|
This was caused by the bokeh LUT being sampled outside the valid range.
But `texelFetch` is only valid if the sample actually exists. This lead to
undefined behavior.
The fix is to increase `DOF_MAX_SLIGHT_FOCUS_RADIUS` (which just offsets the
LUT along the X=Y axis) to avoid any sample outside the defined range.
|
|
|
|
|
|
This was caused by the drivers not optimizing the shader enough to remove
the samplers and data used by closure eval. Removing the lighting loops
from the depth shader fixes the perf regression.
|
|
Also some clang-format changes.
|
|
Add translation/rotation/scale parameters for custom bones shapes. The
new scale is a 3D vector `custom_shape_scale_xyz`, and replaces the
`custom_shape_scale` float.
Reviewed By: #animation_rigging, sybren, zeddb
Differential Revision: https://developer.blender.org/D10974
|
|
|
|
This enables the overlay for instanced geometry.
After this change, objects that are an instance of the current active
object (which are also being modified in the current active mode) won't
fade, which is different from the previous behavior.
Reviewed By: fclem
Maniphest Tasks: T82155
Differential Revision: https://developer.blender.org/D9362
|
|
|
|
When a scene uses cryptomatte the viewport rendering would lead to a
memory leak. The reason was that all image renders (viewport+final)
activated cryptomatte. But is only used for final rendering.
This patch only activates cryptomatte when doing final rendering.
|
|
|
|
|
|
|
|
|
|
This was caused by the SSR option resetting the accumulation. But the
render passes were only cleared in the init phase. This means that
when SSR was resetting the `taa_render_sample` the actual renderpasses
would still contains 1 sample. This means the renderpasses were always
divided by the wrong number of samples.
The fix is to clear just before accumulation if the sample is 1.
The fact that it works for motion blur is kind of a blessing. This is because
we check `stl->effects->ssr_was_valid_double_buffer` before resetting the
sampling. So this only happens on the first motion step and does not affect
the rest of the rendering.
Differential Revision: https://developer.blender.org/D11033
|
|
This artifact was already present in previous version but was hidden
by the faulty SSS scale.
The issue comes from the translucence using the geometric normal
(computed using fragment shader derivative) leading to poor precision at
depth discontinuity.
Replacing using the same geometric normal reconstruction as the ambient
occlusion pass removes most of the issue.
|
|
This was caused by the material grouping system which was missing
a per material uniform update in the opaque case.
|
|
This was caused by the SSR option resetting the accumulation. But the
render passes were only cleared in the init phase. This means that
when SSR was resetting the taa_render_sample the actual renderpasses
would still contains 1 sample. This means the renderpasses were always
divided by the wrong number of samples.
The fix is to clear just before accumulation if the sample is 1.
The fact that it works for motion blur is kind of a blessing. This is
because we check stl->effects->ssr_was_valid_double_buffer before
resetting the sampling. So this only happens on the first motion step
and does not affect the rest of the rendering.
Reviewed by: jbakker
Differential Revision: https://developer.blender.org/D11033
|
|
|
|
This patch adds a threshold value to the glow effect in color mode.
Currently, the threshold is hardcoded to 5%.
You can select a color and specify a higher threshold to include
similar colors in the effect.
Note: depends on D10670
Reviewed By: #grease_pencil, pepeland
Differential Revision: https://developer.blender.org/D10672
|