Age | Commit message (Collapse) | Author |
|
With (center) position, radius and random value outputs.
Eevee does not yet support rendering point clouds, but an untested
implementation of this node was added for when it does.
Ref T92573
|
|
The evaluated mesh is a result of evaluated modifiers, and referencing
other evaluated IDs such as materials.
It can not be stored in the EditMesh structure which is intended to be
re-used by many areas. Such sharing was causing ownership errors causing
bugs like
T93855: Cycles crash with edit mode and simultaneous viewport and final render
The proposed solution is to store the evaluated edit mesh and its cage in
the object's runtime field. The motivation goes as following:
- It allows to avoid ownership problems like the ones in the linked report.
- Object level is chosen over mesh level is because the evaluated mesh
is affected by modifiers, which are on the object level.
This patch allows to have modifier stack of an object which shares mesh with
an object which is in edit mode to be properly taken into account (before
the change the modifier stack from the active object will be used for all
objects which share the mesh).
There is a change in the way how copy-on-write is handled in the edit mode to
allow proper state update when changing active scene (or having two windows
with different scenes). Previously, the copt-on-write would have been ignored
by skipping tagging CoW component. Now it is ignored from within the CoW
operation callback. This allows to update edit pointers for objects which are
not from the current depsgraph and where the edit_mesh was never assigned in
the case when the depsgraph was evaluated prior the active depsgraph.
There is no user level changes changes expected with the CoW handling changes:
should not affect on neither performance, nor memory consumption.
Tested scenarios:
- Various modifiers configurations of objects sharing mesh and be part of the
same scene.
- Steps from the reports: T93855, T82952, T77359
This also fixes T76609, T72733 and perhaps other reports.
Differential Revision: https://developer.blender.org/D13824
|
|
Custom bones are drawn by instancing the GPUBatch of the base object. To
access the mesh and its GPUBatch, `BKE_object_get_evaluated_mesh` was
used. However, since GPU subdivision support, this will return a
subdivision wrapper which will never be drawn, and thus will have an
invalid batch, which caused the crash.
`BKE_object_get_evaluated_mesh_no_subsurf` should be used instead, to
return the mesh that will be drawn, and have the subdivision evaluated
on the GPU. Note that the rest of the draw code is already using this
function.
|
|
This adds vertex creasing support for OpenSubDiv for modeling, rendering,
Alembic and USD I/O.
For modeling, vertex creasing follows the edge creasing implementation with an
operator accessible through the Vertex menu in Edit Mode, and some parameter in
the properties panel. The option in the Subsurf and Multires to use edge
creasing also affects vertex creasing.
The vertex crease data is stored as a CustomData layer, unlike edge creases
which for now are stored in `MEdge`, but will in the future also be moved to
a `CustomData` layer. See comments for details on the difference in behavior
for the `CD_CREASE` layer between egdes and vertices.
For Cycles this adds sockets on the Mesh node to hold data about which vertices
are creased (one socket for the indices, one for the weigths).
Viewport rendering of vertex creasing reuses the same color scheme as for edges
and creased vertices are drawn bigger than uncreased vertices.
For Alembic and USD, vertex crease support follows the edge crease
implementation, they are always read, but only exported if a `Subsurf` modifier
is present on the Mesh.
Reviewed By: brecht, fclem, sergey, sybren, campbellbarton
Differential Revision: https://developer.blender.org/D10145
|
|
This reverts commit edee5a947b7ea3e1324aa334a22c7c9bbf47f5f7.
Fixes compilation error (Missing file BLI_float2.hh)
|
|
This reverts commit 8fb2ff458ba579dba08bfdf57d043ad158b5db07.
Missing some files.
|
|
This is a first part of the Shader Create Info system could be.
A shader create info provides a way to define shader structure, resources
and interfaces. This makes for a quick way to provide backend agnostic
binding informations while also making shader variations easy to declare.
- Clear source input (only one file). Cleans up the GPU api since we can create a
shader from one descriptor
- Resources and interfaces are generated by the backend (much simpler than parsing).
- Bindings are explicit from position in the array.
- GPUShaderInterface becomes a trivial translation of enums and string copy.
- No external dependency to third party lib.
- Cleaner code, less fragmentation of resources in several libs.
- Easy to modify / extend at runtime.
- no parser involve, very easy to code.
- Does not hold any data, can be static and kept on disc.
- Could hold precompiled bytecode for static shaders.
This also includes a new global dependency system.
GLSL shaders can include other sources by using #pragma BLENDER_REQUIRE(...).
This patch already migrated several builtin shaders. Other shaders should be migrated
one at a time, and could be done inside master.
There is a new compile directive `WITH_GPU_SHADER_BUILDER` this is an optional
directive for linting shaders to increase turn around time.
What is remaining:
- pyGPU API {T94975}
- Migration of other shaders. This could be a community effort.
Reviewed By: jbakker
Maniphest Tasks: T94975
Differential Revision: https://developer.blender.org/D13360
|
|
MSVC used to warn about const mismatch for arguments passed by value.
Remove these as newer versions of MSVC no longer show this warning.
|
|
When weight painting the bone overlay is extremely intrusive,
effectively requiring either extensive use of hiding individual
bones, or disabling the whole bone overlay between selections.
This addresses the issue by adding a bone opacity slider that
is used for the 'wireframe' armature drawing mode. It directly
controls the uniform opacity as a straightforward option.
Differential Revision: https://developer.blender.org/D11804
|
|
|
|
|
|
Doing this in preparation for some work on asset preview generation.
Differential Revision: https://developer.blender.org/D13676
|
|
This evaluator is used in order to evaluate subdivision at render time, allowing for
faster renders of meshes with a subdivision surface modifier placed at the last
position in the modifier list.
When evaluating the subsurf modifier, we detect whether we can delegate evaluation
to the draw code. If so, the subdivision is first evaluated on the GPU using our own
custom evaluator (only the coarse data needs to be initially sent to the GPU), then,
buffers for the final `MeshBufferCache` are filled on the GPU using a set of
compute shaders. However, some buffers are still filled on the CPU side, if doing so
on the GPU is impractical (e.g. the line adjacency buffer used for x-ray, whose
logic is hardly GPU compatible).
This is done at the mesh buffer extraction level so that the result can be readily used
in the various OpenGL engines, without having to write custom geometry or tesselation
shaders.
We use our own subdivision evaluation shaders, instead of OpenSubDiv's vanilla one, in
order to control the data layout, and interpolation. For example, we store vertex colors
as compressed 16-bit integers, while OpenSubDiv's default evaluator only work for float
types.
In order to still access the modified geometry on the CPU side, for use in modifiers
or transform operators, a dedicated wrapper type is added `MESH_WRAPPER_TYPE_SUBD`.
Subdivision will be lazily evaluated via `BKE_object_get_evaluated_mesh` which will
create such a wrapper if possible. If the final subdivision surface is not needed on
the CPU side, `BKE_object_get_evaluated_mesh_no_subsurf` should be used.
Enabling or disabling GPU subdivision can be done through the user preferences (under
Viewport -> Subdivision).
See patch description for benchmarks.
Reviewed By: campbellbarton, jbakker, fclem, brecht, #eevee_viewport
Differential Revision: https://developer.blender.org/D12406
|
|
This was visible outside of camera view and was not respecting the
"Depth of Field" checkbox on the Camera properties.
Now return early if DoF should not be visible.
Maniphest Tasks: T94262
Differential Revision: https://developer.blender.org/D13631
|
|
Also add groups in some files.
|
|
Ref T92709
|
|
Issue is that external engine uses the gpu info. but overwrote the
instance data. The draw manager would then detect instance data and
required the engine type to have a instance free callback.
The solution is to save some space in the engine data to hold an empty
and unused instance_data attribute to comply with `ViewportEngineData`
struct.
|
|
In the original design draw engines had to copy with a limitation that
they were not allowed to reuse complex data structures between drawing
calls. Data that could be reused were limited to:
- GPUFramebuffers
- GPUTextures
- Memory that could be removed calling MEM_freeN (storage list)
- DRWPass
This is fine when the storage list contains arrays or structs but when
more complex data types (vectors, maps) etc wasn't possible.
This patch adds instance_data that can be reused between drawing calls.
The instance_data is controlled by the draw engine and doesn't need to
be limited as described above.
When an engines stores instance_data it must implement the
`DrawEngineType.instance_free` callback to free the data.
The patch originates from eevee rewrite. But was added to master as the
image engine rewrite also has a need for it.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D13425
|
|
This is a continuation of D13462 to clean up source typos.
Differential Revision: https://developer.blender.org/D13471
|
|
Wire-only meshes have a special case in the overlay drawing to give
the wire shader a special color (which avoids the lines being dashed,
somehow). The fast path for duplis didn't have that special case.
Differential Revision: https://developer.blender.org/D13196
|
|
|
|
The problem is that drw_batch_cache_generate_requested_delayed
is called on the object, which uses the original object data type to
choose which data type to get info for. So for curves and text it uses
the incorrect type (not the evaluated mesh like we hardcoded in the
armature overlay code).
To fix this I hardcoded the "delayed" generation to only use the
evaluated mesh. Luckily it wasn't use elsewhere besides this
armature overlay system. That seems like the simplest fix for
3.0. A proper solution should rewrite this whole area anyway.
Differential Revision: https://developer.blender.org/D13439
|
|
|
|
|
|
|
|
This part of the drawing code assumes that the bone custom object
has only one evaluated geometry component, and it also uses the
object type to check which data to draw, with the functions like
`DRW_cache_object_surface_get` that just take an object input.
Those functions usually work on evaluated objects, which use the
instancing system to access a temporary object with `object.data`
replaced for data types that don't match the original object.
That assumption used to work, but now curve, point cloud, or volume
objects can have an evaluated mesh which is not accessed with the
same object for render engine drawing.
The "correct" solution for the way this code is structured would be to
loop through all of the geometry components and try to get GPU batches
from every one of them. However, that significantly increases complexity
in an area that should probably be refactored anyway. This patch treats
the mesh as a special case, and only draws the evaluated mesh.
The **best** solution in my opinion might be refactoring this area to
use the instancing system with some sort of viewport-only flag so
the custom shape instances aren't added in the render.
The solution is "partial" because the "Wireframe" option only works
for meshes from mesh objects, even after this fix, and because other
data besides meshes is not displayed at all.
Differential Revision: https://developer.blender.org/D13038
|
|
Explains more what it does, not how it is used.
|
|
Regular images are also tiled images, but with a default tile that leads
to the same result.
|
|
|
|
This disables motion blur for geometry instances in eevee, which did
not work correctly anyway. See code comment for more details.
Differential Revision: https://developer.blender.org/D13334
|
|
|
|
After rBb9febb54a492, the evaluated mesh from a curve is now presented
to render engines as a separate mesh object, but some code still assumed
that a curve object itself could have an evaluated mesh. However, this is
still true for surface objects and metaballs, which don't
use geometry sets yet.
Differential Revision: https://developer.blender.org/D13272
|
|
Contributed by luzpaz.
Differential Revision: https://developer.blender.org/D13264
|
|
|
|
The Cycles accurate mode was removed, but the Eevee option for this has
a different meaning and should not have been removed. The Eevee accurate
makes cryptomatte accumulate for every sample, which Cycles has always
done regardless of any option.
|
|
|
|
With instancing becoming more common with geometry nodes,
instances are less of a separate thing and more of an essential part
of evaluated data. Displaying them with a separate outline, while
helpful in some cases, is not worth the lack of visibility or confusion
about selected/active status. Information about the performance
of the scene due to instancing is always available with the statistics
like vertex count, etc.
The problems were compounded by the fact that the instancing
system is used to output geometry components that don't correspond
to the object's original type. So this patch also fixes that problem.
Fixes T92079, T81010
Ref T91310
Differential Revision: https://developer.blender.org/D13133
|
|
|
|
This patch adds shader compilation tests for the basic engine in `shaders_test.cc`
Addresses T92701
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D13066
|
|
Adding virtual constructors to base classes.
|
|
|
|
Image engine is used to draw an image into a space. The current
structure wasn't clear and couldn't be easilly extended. This refactor
spliced the image draw engine into 3 main components.
- Space accessors: contains an interface to communicate with space data
(Image editor, UV Editor, Node Editor) in a common way. This reduced
the branching in the code base.
- DrawingMode: contains an interface to the used tactic to draw an image
inside the space framebuffer. Currently only one mode is implemented;
in the future there could be a separate drawing mode for huge images.
- ImageEngine: the core that connects the draw manager with the space
data and drawing mode.
|
|
|
|
|
|
External symbols in C files need
to be marked as such otherwise
the linker will not find them.
|
|
|
|
|
|
Previously, `ImageTile->ok` and `ImageUser->ok` were used to indicate
whether an image failed to load. There were three possible values
which (probably) had the following meanings:
* `0`: There was an error while loading the image. Don't try to load again.
* `1`: Default value. Try to load the image.
* `2`: The image was loaded successfully.
This image-wide flag did not make sense unfortunately, because loading
may work for some frames of an image sequence but not for others.
Remember than an image data block can also contain a movie.
The purpose of the `->ok` flag was to serve as an optimization to avoid
trying to load a file over and over again when there is an error (e.g. the
file does not exist or is invalid). To get the optimization back, the patch
is changing `MovieCache` so that it can also cache failed load attempts.
As a consequence, `ibuf` is allowed to be `NULL` in a few more places.
I added the appropriate null checks.
This also solves issues when image sequences are used with the
Image Texture node in Geometry nodes (also see D12827).
Differential Revision: https://developer.blender.org/D12957
|
|
|
|
|