Age | Commit message (Collapse) | Author |
|
See comment in code for more details.
Differential Revision: https://developer.blender.org/D10615
|
|
|
|
This adds high quality normals for non meshes. These include
* Volumetric Object Wireframe
* Metaballs
* Extracted Curves
* Curves in edit mode
This is in preparation to fix a regression in recent AMD
drivers where the `GL_INT_2_10_10_10_REV` data type isn't
working in Polaris cards.
|
|
HDRI preview should have resolution dependent on dpi, viewport scale and HDRI gizmo size.
This patch uses a LOD to render a more round sphere.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D9382
|
|
|
|
|
|
Previously, one could only select a volume object in the outliner
or by clicking on the object origin. This patch allows you to click
on the actual volume.
Furthermore, the generated (invisible) mesh that is used for
selection is also used to draw an outline for the volume object now.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9022
|
|
Following the most widely used convention for including todo's in
the code, that is: `TODO(name):`, `FIXME(name)` ... etc.
|
|
This is done at drawtime automatically.
|
|
Also order sizeof(..) first to promote other values to size_t.
|
|
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/draw` module. Not all warnings are addressed
in this commit.
No functional changes.
|
|
Also includes outline overlays. Removes the temp overlay drawing
We make the geometry follow camera like billboards this uses less
geometry. Currently we use half octahedron for now. Goal would be
to use icospheres.
This patch also optimize the case when pointcloud has uniform radius.
However we should premultiply the radius prop by the default radius
beforehand to avoid a multiplication on CPU.
Using geometry instead of pseudo raytraced spheres is more scalable as
we can render as low as 1 or 2 triangle to a full half sphere and can
integrate easily in the render pipeline using a low amount of code.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8301
|
|
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
|
|
This adds object motion blur vectors for EEVEE as well as better noise
reduction for it.
For TAA reprojection we just compute the motion vector on the fly based on
camera motion and depth buffer. This makes possible to store another motion
vector only for the blurring which is not useful for TAA history fetching.
Motion Data is saved per object & per geometry if using deformation blur.
We support deformation motion blur by saving previous VBO and modifying the
actual GPUBatch for the geometry to include theses VBOs.
We store Previous and Next frame motion in the same motion vector buffer
(RG for prev and BA for next). This makes non linear motion blur (like
rotating objects) less prone to outward/inward blur.
We also improve the motion blur post process to expand outside the objects
border. We use a tile base approach and the max size of the blur is set via
a new render setting.
We use a background reconstruction method that needs another setting
(Background Separation).
Sampling is done using a fixed 8 dithered samples per direction. The final
render samples will clear the noise like other stochastic effects.
One caveat is that hair particles are not yet supported. Support will
come in another patch.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7297
|
|
The memory leak is noticeable when using custom bone shapes. When using custom
bone shapes objects could be extracted twice. Where the second extraction can
overwrite data created by the first extraction what causes the memory leak.
Options that have been checked:
1. Use two task graphs phases. One for normal extraction (DST.task_graph) and
the other one will handle extractions that require blocking threads.
2. Keep a list of all objects that needs extraction and only start extraction
when all objects have been populated.
The second would slow performance as the extraction only happens when all
objects have been populated. In the future we might want to go for the second
option when we have the capability to render multiple viewports with a single
populate. As this design isn't clear this patch will implement the first
option.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7969
|
|
This patch uses a graph flow scheduler for creating all mesh batches.
On a Ryzen 1700 the framerate of Spring/020_02A.anim.blend went from 10 fps to 11.5 fps.
For each mesh where batches needs to be updated a sub-graph will be added to the task_graph.
This sub-graph starts with an extract_render_data_node. This fills/converts the required data
from Mesh.
Small extractions and extractions that can't be multi-threaded are grouped in a single
`extract_single_threaded_task_node`.
Other extractions will create a node for each loop exceeding 4096 items. these nodes are
linked to the `user_data_init_task_node`. the `user_data_init_task_node` prepares the userdata
needed for the extraction based on the data extracted from the mesh.
Note: If the `lines` and `lines_loose` are requested, the `lines_loose` sub-buffer is created
as part of the lines extraction. When the lines_loose is only requested the sub-buffer is
created from the existing `lines` buffer. It is assumed that the lines buffer is always
requested before or together with the lines_loose what is always the case (see
`DRW_batch_requested(cache->batch.loose_edges, GPU_PRIM_LINES)` in `draw_cache_impl_mesh.c`).
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7618
|
|
|
|
|
|
|
|
Only the volume drawing part is really finished and exposed to the user. Hair
plugs into the existing hair rendering code and is fairly straightforward. The
pointcloud drawing is a hack using overlays rather than Eevee and workbench.
The most tricky part for volume rendering is the case where each volume grid
has a different transform, which requires an additional matrix in the shader
and non-trivial logic in Eevee volume drawing. In the common case were all the
transforms match we don't use the additional per-grid matrix in the shader.
Ref T73201, T68981
Differential Revision: https://developer.blender.org/D6955
|
|
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
|
|
This is in preparation of new object types. This only changes mesh_eval, we
may do the same for mesh_deform_eval and other areas in the future if there is
a need for it.
This previously caused a bug in T74283, that should be fixed now.
Differential Revision: https://developer.blender.org/D6695
|
|
than mesh"
This reverts commit f2b95b9eae2ee913c99cff7595527b18d8b49d0a.
Fix T74283: modifier display lost when moving object in edit mode.
The cause is not immediately obvious so better to revert and look at this
carefully.
|
|
This is in preparation of new object types. This only changes mesh_eval, we
may do the same for mesh_deform_eval and other areas in the future if there is
a need for it.
Differential Revision: https://developer.blender.org/D6695
|
|
Reviewed By: brecht sergey jbakker
Differential Revision: http://developer.blender.org/D6729
|
|
|
|
When using duplicate linked meshes, objects that are not in edit-mode will be drawn as
it is in edit mode, when another object with the same mesh is in edit mode.
This will not be the case when one of the objects are influenced by modifiers. The change
reflects more how it was done in Blender 2.79.
The current change introduces a draw manager method that checks in detail who is responsible
for the drawing (render engine or overlay engine). If the edit mesh is not the original or
the object that is drawn doesn't draw the original mesh the object will be drawn by the render
engine.
Known Limitation of this patch is that the rendering outside edit mode doesn't reflect the
latest changes until the user switches between object and edit mode. When there are no
modifiers in use, the updating is done immediately.
IMO this would be sufficient for blender 2.82, it also fixes parts of T72733.
The updating of the surface batches requires more development and is
post-poned for now.
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D6737
|
|
|
|
|
|
|
|
Instead of changing the modifiers behavior, we make sure to always use
the data->totcol instead of the ob->totcol. Also we centralize getting
this number to avoid future issues.
Fix T72593 Blender crashes when separating mesh
Fix T72017 Crash on set visibility change
|
|
|
|
This adds some kind of dashing to the tube and cone limits. Although the
dashing is in object space and is not a good as old dashing. But it is
the least time consuming and least complex solution.
|
|
This way we remove the need for the srgb boolean uniform and a lot of code complexity. However, mesh update is going to be a bit slower.
I did not benchmark the performance impact.
This also fix a typo in draw_cache_impl_particles.c and fix hair not using vertex color in workbench.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6610
|
|
|
|
Due to the refactoring of the overlay engine the draw caches were
changed. The sphere batch used to have positions and normals. After the
refactoring it didn't had the normals anymore. The normals are needed
for shading. As they were not there the look dev spheres were rendered
black.
This change add the `nor` attribute to `DRW_cache_sphere_get` batch.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6393
|
|
|
|
This is the unification of all overlays into one overlay engine as described in T65347.
I went over all the code making it more future proof with less hacks and removing old / not relevent parts.
Goals / Acheivements:
- Remove internal shader usage (only drw shaders)
- Remove viewportSize and viewportSizeInv and put them in gloabl ubo
- Fixed some drawing issues: Missing probe option and Missing Alt+B clipping of some shader
- Remove old (legacy) shaders dependancy (not using view UBO).
- Less shader variation (less compilation time at first load and less patching needed for vulkan)
- removed some geom shaders when I could
- Remove static e_data (except shaders storage where it is OK)
- Clear the way to fix some anoying limitations (dithered transparency, background image compositing etc...)
- Wireframe drawing now uses the same batching capabilities as workbench & eevee (indirect drawing).
- Reduced complexity, removed ~3000 Lines of code in draw (also removed a lot of unused shader in GPU).
- Post AA to avoid complexity and cost of MSAA.
Remaining issues:
- ~~Armature edits, overlay toggles, (... others?) are not refreshing viewport after AA is complete~~
- FXAA is not the best for wires, maybe investigate SMAA
- Maybe do something more temporally stable for AA.
- ~~Paint overlays are not working with AA.~~
- ~~infront objects are difficult to select.~~
- ~~the infront wires sometimes goes through they solid counterpart (missing clear maybe?) (toggle overlays on-off when using infront+wireframe overlay in solid shading)~~
Note: I made some decision to change slightly the appearance of some objects to simplify their drawing. Namely the empty arrows end (which is now hollow/wire) and distance points of the cameras/spots being done by lines.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6296
|
|
|
|
|
|
|
|
When the result isn't used, prefer post increment/decrement
(already used nearly everywhere in Blender).
|
|
|
|
For clarity sake, the batch cache now uses exclusively per Loop attributes.
While this is a bit of a waste of VRAM (for the few case where per vert
attribs are enough) it reduces the complexity and amount of overall VBO
to update in general situations.
This patch also makes the VertexBuffers filling multithreaded. This make
the update of dense meshes a bit faster. The main bottleneck is the
IndexBuffers update which cannot be multithreaded efficiently (have to
increment a counter and/or do a final sorting pass).
We introduce the concept of "extract" functions/step.
All extract functions are executed in one thread each and if possible,
using multiple thread for looping over all elements.
Reviewed By: brecht
Differential Revision: http://developer.blender.org/D5424
|
|
|
|
|
|
This type of indices is not natively supported on modern GPU and
gives warning on some implementation. The memory savings it
provides is also quite minimal and unlikely to be visible on
nowadays hardware.
This remove some uneeded struct members and makes primitive
restart always enabled by default. This can be broken by addons
if they are not careful enough but many other states have this
problem.
Also leverage GL_PRIMITIVE_RESTART_FIXED_INDEX if
ARB_ES3_compatibility is supported. This removes all API calls
to change restart index depending on indices length.
|
|
This is in order to have VAO handled by thoses batches instead of using a
common VAO. Even if the VAO has no importance in these case using a batch
will help when transitioning to Vulkan.
|
|
|