Age | Commit message (Collapse) | Author |
|
With the ultimate goal of simplifying drawing and evaluation,
this patch makes the following changes and removes code:
- Use `Mesh` instead of `DispList` for evaluated basis metaballs.
- Remove all `DispList` drawing code, which is now unused.
- Simplify code that converts evaluated metaballs to meshes.
- Store the evaluated mesh in the evaluated geometry set.
This has the following indirect benefits:
- Evaluated meshes from metaball objects can be used in geometry nodes.
- Renderers can ignore evaluated metaball objects completely
- Cycles rendering no longer has to convert to mesh from `DispList`.
- We get closer to removing `DispList` completely.
- Optimizations to mesh rendering will also apply to metaball objects.
The vertex normals on the evaluated mesh are technically invalid;
the regular calculation wouldn't reproduce them. Metaball objects
don't support modifiers though, so it shouldn't be a problem.
Eventually we can support per-vertex custom normals (T93551).
Differential Revision: https://developer.blender.org/D14593
|
|
This commit adds visualization to the selection in curves sculpt mode.
Previously it was only possible to see the selection when it was
connected to a material.
In order to obstruct the users vision as little as possible, the
selected areas of the curve are left as is, but a dark overlay
is drawn over unselected areas.
To make it work, the overlay requests the selection attribute and then
ensures that the evaluation is complete for curves. Then it retrieves
the evaluated selection GPU texture and passes that to the shader.
This reuses the existing generic attribute extraction system because
there currently wouldn't be any benefits to dealing with selection
separately, and because it avoids duplication of the logic that
extracts attributes from curves and evaluates them if necessary.
Differential Revision: https://developer.blender.org/D15219
|
|
Also remove const for the object argument, since the object data
is logically modified by generating the data.
|
|
This adds support to render Curves attributes in EEVEE.
Each attribute is stored in a texture derived from a VBO. As the
shading group needs the textures to be valid upon creation, the
attributes are created and setup during its very creation, instead
of doing it lazily via create_requested which we cannot rely on
anyway as contrary to the mesh batch, we do cannot really tell if
attributes need to be updated or else via some `DRW_batch_requested`.
Since point attributes need refinement, and since attributes are all
cast to vec4/float4 to account for differences in type conversions
between Blender and OpenGL, the refinement shader for points is
used as is. The point attributes are stored for each subdivision level
in CurvesEvalFinalCache. Each subdivision level also keeps track of the
attributes already in use so they are properly updated when needed.
Some basic garbage collection was added similar to what is done
for meshes: if the attributes used over time have been different
from the currently used attributes for too long, then the buffers
are freed, ensuring that stale attributesare removed.
This adds `CurvesInfos` to the shader creation info, which stores
the scope in which the attributes are defined. Scopes are stored
as booleans, in an array indexed by attribute loading order which
is also the order in which the attributes were added to the material.
A mapping is necessary between the indices used for the scoping, and
the ones used in the Curves cache, as this may contain stale
attributes which have not been garbage collected yet.
Common utilities with the mesh code for handling requested
attributes were moved to a separate file.
Differential Revision: https://developer.blender.org/D14916
|
|
This adds support to show dots for the curves points when in edit mode,
using a specific overlay.
This also adds `DRW_curves_batch_cache_create_requested` which for now
only creates the point buffer for the newly added `edit_points` batch.
In the future, this will also handle other edit mode overlays, and
probably also replace the current curves batch cache creation.
Maniphest Tasks: T95770
Differential Revision: https://developer.blender.org/D14262
|
|
This commit furthers some of the changes that were started in
rBb9febb54a492 and subsequent commits by changing the way surface
objects are presented to render engines and other users of evaluated
objects in the same way. Instead of presenting evaluated surface objects
as an `OB_SURF` object with an evaluated mesh, `OB_SURF` objects
can now have an evaluated geometry set, which uses the same system
as other object types to deal with multi-type evaluated data.
This clarification makes it more obvious that lots of code that dealt
with the `DispList` type isn't used. It wasn't before either, now it's
just *by design*. Over 1100 lines can be removed. The legacy curve
draw cache code is much simpler now too. The idea behind the further
removal of `DispList` is that it's better to focus optimization efforts
on a single mesh data structure.
One expected functional change is that the evaluated mesh from surface
objects can now be used in geometry nodes with the object info node.
Cycles and the OBJ IO tests had to be tweaked to avoid using evaluated
surface objects instead of the newly exposed mesh objects.
Differential Revision: https://developer.blender.org/D14550
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
|
|
The evaluated mesh is a result of evaluated modifiers, and referencing
other evaluated IDs such as materials.
It can not be stored in the EditMesh structure which is intended to be
re-used by many areas. Such sharing was causing ownership errors causing
bugs like
T93855: Cycles crash with edit mode and simultaneous viewport and final render
The proposed solution is to store the evaluated edit mesh and its cage in
the object's runtime field. The motivation goes as following:
- It allows to avoid ownership problems like the ones in the linked report.
- Object level is chosen over mesh level is because the evaluated mesh
is affected by modifiers, which are on the object level.
This patch allows to have modifier stack of an object which shares mesh with
an object which is in edit mode to be properly taken into account (before
the change the modifier stack from the active object will be used for all
objects which share the mesh).
There is a change in the way how copy-on-write is handled in the edit mode to
allow proper state update when changing active scene (or having two windows
with different scenes). Previously, the copt-on-write would have been ignored
by skipping tagging CoW component. Now it is ignored from within the CoW
operation callback. This allows to update edit pointers for objects which are
not from the current depsgraph and where the edit_mesh was never assigned in
the case when the depsgraph was evaluated prior the active depsgraph.
There is no user level changes changes expected with the CoW handling changes:
should not affect on neither performance, nor memory consumption.
Tested scenarios:
- Various modifiers configurations of objects sharing mesh and be part of the
same scene.
- Steps from the reports: T93855, T82952, T77359
This also fixes T76609, T72733 and perhaps other reports.
Differential Revision: https://developer.blender.org/D13824
|
|
MSVC used to warn about const mismatch for arguments passed by value.
Remove these as newer versions of MSVC no longer show this warning.
|
|
Ref T92709
|
|
Generally the evaluated mesh should not be changed, since that is the
job of the modifier stack. Current code is far from const correct in
that regard. This commit uses a const variable for the reult of
`BKE_object_get_evaluated_mesh` in some cases. The most common
remaining case is retrieving a BVH tree from the mesh.
|
|
Colors are often thought of as being 4 values that make up that can make any color.
But that is of course too limited. In C we didn’t spend time to annotate what we meant
when using colors.
Recently `BLI_color.hh` was made to facilitate color structures in CPP. CPP has possibilities to
enforce annotating structures during compilation and can adds conversions between them using
function overloading and explicit constructors.
The storage structs can hold 4 channels (r, g, b and a).
Usage:
Convert a theme byte color to a linearrgb premultiplied.
```
ColorTheme4b theme_color;
ColorSceneLinear4f<eAlpha::Premultiplied> linearrgb_color =
BLI_color_convert_to_scene_linear(theme_color).premultiply_alpha();
```
The API is structured to make most use of inlining. Most notable are space
conversions done via `BLI_color_convert_to*` functions.
- Conversions between spaces (theme <=> scene linear) should always be done by
invoking the `BLI_color_convert_to*` methods.
- Encoding colors (compressing to store colors inside a less precision storage)
should be done by invoking the `encode` and `decode` methods.
- Changing alpha association should be done by invoking `premultiply_alpha` or
`unpremultiply_alpha` methods.
# Encoding.
Color encoding is used to store colors with less precision as in using `uint8_t` in
stead of `float`. This encoding is supported for `eSpace::SceneLinear`.
To make this clear to the developer the `eSpace::SceneLinearByteEncoded`
space is added.
# Precision
Colors can be stored using `uint8_t` or `float` colors. The conversion
between the two precisions are available as methods. (`to_4b` and
`to_4f`).
# Alpha conversion
Alpha conversion is only supported in SceneLinear space.
Extending:
- This file can be extended with `ColorHex/Hsl/Hsv` for different representations
of rgb based colors. `ColorHsl4f<eSpace::SceneLinear, eAlpha::Premultiplied>`
- Add non RGB spaces/storages ColorXyz.
Reviewed By: JacquesLucke, brecht
Differential Revision: https://developer.blender.org/D10978
|
|
This reverts commit fd94e033446c72fb92048a9864c1d539fccde59a.
does not compile against latest master.
|
|
Colors are often thought of as being 4 values that make up that can make any color.
But that is of course too limited. In C we didn’t spend time to annotate what we meant
when using colors.
Recently `BLI_color.hh` was made to facilitate color structures in CPP. CPP has possibilities to
enforce annotating structures during compilation and can adds conversions between them using
function overloading and explicit constructors.
The storage structs can hold 4 channels (r, g, b and a).
Usage:
Convert a theme byte color to a linearrgb premultiplied.
```
ColorTheme4b theme_color;
ColorSceneLinear4f<eAlpha::Premultiplied> linearrgb_color =
BLI_color_convert_to_scene_linear(theme_color).premultiply_alpha();
```
The API is structured to make most use of inlining. Most notable are space
conversions done via `BLI_color_convert_to*` functions.
- Conversions between spaces (theme <=> scene linear) should always be done by
invoking the `BLI_color_convert_to*` methods.
- Encoding colors (compressing to store colors inside a less precision storage)
should be done by invoking the `encode` and `decode` methods.
- Changing alpha association should be done by invoking `premultiply_alpha` or
`unpremultiply_alpha` methods.
# Encoding.
Color encoding is used to store colors with less precision as in using `uint8_t` in
stead of `float`. This encoding is supported for `eSpace::SceneLinear`.
To make this clear to the developer the `eSpace::SceneLinearByteEncoded`
space is added.
# Precision
Colors can be stored using `uint8_t` or `float` colors. The conversion
between the two precisions are available as methods. (`to_4b` and
`to_4f`).
# Alpha conversion
Alpha conversion is only supported in SceneLinear space.
Extending:
- This file can be extended with `ColorHex/Hsl/Hsv` for different representations
of rgb based colors. `ColorHsl4f<eSpace::SceneLinear, eAlpha::Premultiplied>`
- Add non RGB spaces/storages ColorXyz.
Reviewed By: JacquesLucke, brecht
Differential Revision: https://developer.blender.org/D10978
|
|
I'd like to use this file to draw curves from geometry nodes, which
would otherwise require implementing a C API. The changes in this
commit are minimal, mostly just casts and changing to nullptr.
Differential Revision: https://developer.blender.org/D11350
|
|
When in edit mode, the edit lines for de-selected surfaces did not
show up.
The bug was caused by the is_gpencil bool which reused another flag.
Both grease pencil and nurbs surfaces use the edit_curve_handle shader.
A dedicated flag was added to make sure the is_gpencil bool is
set correctly.
Reviewed By: fclem
Maniphest Tasks: T84260
Differential Revision: https://developer.blender.org/D9985
|
|
This adds high quality normals for non meshes. These include
* Volumetric Object Wireframe
* Metaballs
* Extracted Curves
* Curves in edit mode
This is in preparation to fix a regression in recent AMD
drivers where the `GL_INT_2_10_10_10_REV` data type isn't
working in Polaris cards.
|
|
It used to be an int mode.
|
|
This reverts commit 0796807720882731cdb70be144aa182e9b0b9ee5.
|
|
It used to be an `int mode`.
|
|
Previously, one could only select a volume object in the outliner
or by clicking on the object origin. This patch allows you to click
on the actual volume.
Furthermore, the generated (invisible) mesh that is used for
selection is also used to draw an outline for the volume object now.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9022
|
|
This removes the limitation of the sculpt overlays not being visible
with modifiers active.
Reviewed By: fclem
Maniphest Tasks: T68900
Differential Revision: https://developer.blender.org/D8673
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
Also includes outline overlays. Removes the temp overlay drawing
We make the geometry follow camera like billboards this uses less
geometry. Currently we use half octahedron for now. Goal would be
to use icospheres.
This patch also optimize the case when pointcloud has uniform radius.
However we should premultiply the radius prop by the default radius
beforehand to avoid a multiplication on CPU.
Using geometry instead of pseudo raytraced spheres is more scalable as
we can render as low as 1 or 2 triangle to a full half sphere and can
integrate easily in the render pipeline using a low amount of code.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8301
|
|
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
|
|
This adds object motion blur vectors for EEVEE as well as better noise
reduction for it.
For TAA reprojection we just compute the motion vector on the fly based on
camera motion and depth buffer. This makes possible to store another motion
vector only for the blurring which is not useful for TAA history fetching.
Motion Data is saved per object & per geometry if using deformation blur.
We support deformation motion blur by saving previous VBO and modifying the
actual GPUBatch for the geometry to include theses VBOs.
We store Previous and Next frame motion in the same motion vector buffer
(RG for prev and BA for next). This makes non linear motion blur (like
rotating objects) less prone to outward/inward blur.
We also improve the motion blur post process to expand outside the objects
border. We use a tile base approach and the max size of the blur is set via
a new render setting.
We use a background reconstruction method that needs another setting
(Background Separation).
Sampling is done using a fixed 8 dithered samples per direction. The final
render samples will clear the noise like other stochastic effects.
One caveat is that hair particles are not yet supported. Support will
come in another patch.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7297
|
|
Regression in 49f59092e7c8c caused all handles to display using
the 'aligned' theme color.
Arrange flags to fix this, add assert to avoid this happening again.
Also rename flag so it's use is clearer.
|
|
This patch uses a graph flow scheduler for creating all mesh batches.
On a Ryzen 1700 the framerate of Spring/020_02A.anim.blend went from 10 fps to 11.5 fps.
For each mesh where batches needs to be updated a sub-graph will be added to the task_graph.
This sub-graph starts with an extract_render_data_node. This fills/converts the required data
from Mesh.
Small extractions and extractions that can't be multi-threaded are grouped in a single
`extract_single_threaded_task_node`.
Other extractions will create a node for each loop exceeding 4096 items. these nodes are
linked to the `user_data_init_task_node`. the `user_data_init_task_node` prepares the userdata
needed for the extraction based on the data extracted from the mesh.
Note: If the `lines` and `lines_loose` are requested, the `lines_loose` sub-buffer is created
as part of the lines extraction. When the lines_loose is only requested the sub-buffer is
created from the existing `lines` buffer. It is assumed that the lines buffer is always
requested before or together with the lines_loose what is always the case (see
`DRW_batch_requested(cache->batch.loose_edges, GPU_PRIM_LINES)` in `draw_cache_impl_mesh.c`).
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7618
|
|
When editing a complex curve is very annoying to have all handles at a time. Also, this is a requirement for the current GSoC Edit Grease Pencil using curves.
I have seen that this improvement can be used in any other area of blender, so I have decided to publish the option in the overlay panel..
Reviewed By: fclem, #user_interface, billreynish, Severin
Differential Revision: https://developer.blender.org/D7754
|
|
|
|
|
|
Only the volume drawing part is really finished and exposed to the user. Hair
plugs into the existing hair rendering code and is fairly straightforward. The
pointcloud drawing is a hack using overlays rather than Eevee and workbench.
The most tricky part for volume rendering is the case where each volume grid
has a different transform, which requires an additional matrix in the shader
and non-trivial logic in Eevee volume drawing. In the common case were all the
transforms match we don't use the additional per-grid matrix in the shader.
Ref T73201, T68981
Differential Revision: https://developer.blender.org/D6955
|
|
|
|
Only Metaballs are left unsupported.
However, the implementation does not match 100% with cycles which converts
all objects to meshes.
Fixes T63424 EEVEE: Normal map node doesn't works with curve objects
|
|
|
|
Instead of changing the modifiers behavior, we make sure to always use
the data->totcol instead of the ob->totcol. Also we centralize getting
this number to avoid future issues.
Fix T72593 Blender crashes when separating mesh
Fix T72017 Crash on set visibility change
|
|
This way we remove the need for the srgb boolean uniform and a lot of code complexity. However, mesh update is going to be a bit slower.
I did not benchmark the performance impact.
This also fix a typo in draw_cache_impl_particles.c and fix hair not using vertex color in workbench.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6610
|
|
|
|
Was caused by DRW_mesh_batch_cache_get_edituv_faces_stretch_area called
after DRW_mesh_batch_cache_create_requested. So it was created on the wrong
object/mesh.
|
|
Support for UV Stretching overlay during multi object editing. The
VBO now holds the ratios per fase. In the shader these ratios will
be compared against the global ratios. The global rations are created
from all selected objects.
The current implementation does not fit well with the draw module. The
plan is to move the drawing of other spaces towards the draw manager what
leads to a better fit. Currently the details on this solution is unclear
but this requirement will become an attentionpoint in the future design.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5665
|
|
|
|
For clarity sake, the batch cache now uses exclusively per Loop attributes.
While this is a bit of a waste of VRAM (for the few case where per vert
attribs are enough) it reduces the complexity and amount of overall VBO
to update in general situations.
This patch also makes the VertexBuffers filling multithreaded. This make
the update of dense meshes a bit faster. The main bottleneck is the
IndexBuffers update which cannot be multithreaded efficiently (have to
increment a counter and/or do a final sorting pass).
We introduce the concept of "extract" functions/step.
All extract functions are executed in one thread each and if possible,
using multiple thread for looping over all elements.
Reviewed By: brecht
Differential Revision: http://developer.blender.org/D5424
|
|
This reduces the cost of querying the batches to the batch cache.
|
|
This is in order to using BLI_INLINE for thoses functions and keep headers
cleany separated.
|
|
|
|
|
|
Enabling the drawing of the mesh analysis overlay.
Currently the settings are part of the scene toolsettings. What makes sense,
for 3d printing, but does not fit well with the per viewport blender 2.80
overlays.
Reviewers: brecht, fclem
Differential Revision: https://developer.blender.org/D4707
|
|
This is only working for shading batches for the moment and only if some Custom data layer are not needed anymore.
The collection rate is hardcoded at 60 sec but could be exposed to the user.
This system can be extended and discard most unused batches in the future.
This commit is in prevision of removing BKE_MESH_BATCH_DIRTY_SHADING when changing shader parameters.
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|