Age | Commit message (Collapse) | Author |
|
|
|
|
|
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
|
|
Ref T92709
|
|
rBaa13c4b386b13111 added a check for the active object
in drawing code, but it missed adding a check for the active
base before trying to retrieve its object.
|
|
With instancing becoming more common with geometry nodes,
instances are less of a separate thing and more of an essential part
of evaluated data. Displaying them with a separate outline, while
helpful in some cases, is not worth the lack of visibility or confusion
about selected/active status. Information about the performance
of the scene due to instancing is always available with the statistics
like vertex count, etc.
The problems were compounded by the fact that the instancing
system is used to output geometry components that don't correspond
to the object's original type. So this patch also fixes that problem.
Fixes T92079, T81010
Ref T91310
Differential Revision: https://developer.blender.org/D13133
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
|
|
|
|
|
|
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
|
|
This project moves the current UV/Image editor drawing to the draw manager.
Why would we do this:
**Performance**:
Current implementation would draw each texel per time. Multiple texels could be
drawn per pixel what would overwrite the previous result. You can notice this
when working with large textures. Repeat image drawing made this visible by
drawing for a small period of time and stop drawing the rest. Now the rendering
is fast and all repeated images are drawn.
**Alpha drawing**:
Current implementation would draw directly in display space. Giving incorrect
results when displaying alpha transparent images.
This addresses {T52680}, {T74709}, {T79518}
The image editor now can show emission only colors. See {D8234} for
examples.
**Current Limitations**
Using images that are larger than supported by your GPU are resized (eg larger
than 16000x16000 are resized to 8k). This leaves some blurring artifacts. It is
a low priority to add support back of displaying individual pixels of huge
images. There is a design task {T80113} with more detail.
**Implementation overview**
Introduced an Image Engine in the draw module. this engine is responsible for
drawing the texture in the main area of the UV/Image editor. The overlay engine
has a edit_uv overlay which is responsible to draw the UV's, shadows and
overlays specifically for the UV Image editor. The background + checker pattern
is drawn by the overlay_background.
The patch will allow us to share overlays between the 3d viewport and UV/Image
editor more easily. In most cases we just need to switch the `pos` with the `u`
attribute in the vertex shader.
The project can be activated in the user preferences as experimental features.
In a later commit this will be reversed.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8234
|
|
This is to modernize the API:
- Add meaningful name to all textures (except DRW textures).
- Remove unused err_out argument: only used for offscreen python.
- Add mipmap count to creation functions for future changes.
- Clarify the data usage in creation functions.
This is a cleanup commit, there is no functional change.
# Conflicts:
# source/blender/gpu/GPU_texture.h
|
|
This follows the GPU module naming of other buffers.
We pass name to distinguish each GPUUniformBuf in debug mode.
Also remove DRW_uniform_buffer interface.
|
|
Differential Revision: https://developer.blender.org/D8607
|
|
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/draw` module. Not all warnings are addressed
in this commit.
No functional changes.
|
|
And move it to GPU module.
|
|
This was just a missing conversion.
|
|
This patch adds ability to set up colors and size of background
(transparency) checkerboard pattern in viewport and 2d editors. No new
backgrounds, only changing colors in existing ones.
This is not the background of the viewport, it is a transparency
checkerboard that is turned on only in render mode, when the
transparency mode is on. And also in 2D-editors, (image, sequencer,
etc).
Reviewed By: Pablo Vazquez, Julian Eisel
Differential Revision: https://developer.blender.org/D6791
|
|
|
|
Only the volume drawing part is really finished and exposed to the user. Hair
plugs into the existing hair rendering code and is fairly straightforward. The
pointcloud drawing is a hack using overlays rather than Eevee and workbench.
The most tricky part for volume rendering is the case where each volume grid
has a different transform, which requires an additional matrix in the shader
and non-trivial logic in Eevee volume drawing. In the common case were all the
transforms match we don't use the additional per-grid matrix in the shader.
Ref T73201, T68981
Differential Revision: https://developer.blender.org/D6955
|
|
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
|
|
Reviewed By: brecht sergey jbakker
Differential Revision: http://developer.blender.org/D6729
|
|
Adds theme settings to allow change of front and back faces of the Face Orientation overlay
Differential Revision: https://developer.blender.org/D6262
Reviewed by Jeroen Bakker
|
|
This is the unification of all overlays into one overlay engine as described in T65347.
I went over all the code making it more future proof with less hacks and removing old / not relevent parts.
Goals / Acheivements:
- Remove internal shader usage (only drw shaders)
- Remove viewportSize and viewportSizeInv and put them in gloabl ubo
- Fixed some drawing issues: Missing probe option and Missing Alt+B clipping of some shader
- Remove old (legacy) shaders dependancy (not using view UBO).
- Less shader variation (less compilation time at first load and less patching needed for vulkan)
- removed some geom shaders when I could
- Remove static e_data (except shaders storage where it is OK)
- Clear the way to fix some anoying limitations (dithered transparency, background image compositing etc...)
- Wireframe drawing now uses the same batching capabilities as workbench & eevee (indirect drawing).
- Reduced complexity, removed ~3000 Lines of code in draw (also removed a lot of unused shader in GPU).
- Post AA to avoid complexity and cost of MSAA.
Remaining issues:
- ~~Armature edits, overlay toggles, (... others?) are not refreshing viewport after AA is complete~~
- FXAA is not the best for wires, maybe investigate SMAA
- Maybe do something more temporally stable for AA.
- ~~Paint overlays are not working with AA.~~
- ~~infront objects are difficult to select.~~
- ~~the infront wires sometimes goes through they solid counterpart (missing clear maybe?) (toggle overlays on-off when using infront+wireframe overlay in solid shading)~~
Note: I made some decision to change slightly the appearance of some objects to simplify their drawing. Namely the empty arrows end (which is now hollow/wire) and distance points of the cameras/spots being done by lines.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6296
|
|
|
|
|
|
Reviewers: brecht
Differential Revision: D4997
|
|
This reverts commit ce34a6b0d727bbde6ae373afa8ec6c42bc8980ce.
|
|
Reviewers: brecht
Differential Revision: D4997
|
|
When the result isn't used, prefer post increment/decrement
(already used nearly everywhere in Blender).
|
|
This replaces temporarily enabling draw-axis.
|
|
T68035 by @luzpaz
|
|
The draw manager used to determine if the view transform should be
applied by checking if the scene was not rendered to an offscreen image.
As the sequencer and texture painting needs to render to an offscreen
image with the view transform applied we need to separate the
`do_color_management` from the `is_image_render`.
Reviewed By: fclem
Maniphest Tasks: T64849
Differential Revision: https://developer.blender.org/D4909
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This removes:
- DRW_STATE_TRANS_FEEDBACK
- DRW_STATE_WIRE
- DRW_STATE_POINT
|
|
|
|
This is a big change that cleanup a lot of confusing code.
- The instancing/batching data buffer distribution in draw_instance_data.c.
- The selection & drawing code in draw_manager_exec.c
- Prety much every non-meshes object drawing (object_mode.c).
Most of the changes are just renaming but there still a chance a typo might
have sneek through.
The Batching/Instancing Shading groups are replace by DRWCallBuffers. This
is cleaner and conceptually more in line with what a DRWShadingGroup should
be.
There is still some little confusion in draw_common.c where some function
takes shgroup as input and some don't.
|
|
This removes ModelViewProjectionMatrix usage
|
|
|
|
|