Age | Commit message (Collapse) | Author |
|
This rewrite improves:
- Code clarity: Less duplicated code and removes a few hacks.
- Compile time performance: Shader code was divided by 3 in average.
I did not profile the compilation time but it is faster.
- Shading Perf: Noticed a 25% performance improvement on
the shading pass with default dielectric principled bsdf.
- Fix Principled Tint being white if color is black
- It seems to have fixed issues on some drivers giving some incorect
results.
- Changes Principled BSDF support to be less hacky.
|
|
|
|
This resulted in hair drawing with an offset if an instance_offset was
set.
note: Usually the instance_offset gets combined with the objects obmat
in 'make_duplis_collection' / 'make_dupli', see
> /* Combine collection offset and `obmat`. */
Using the resulting DupliObject->mat instead does include the
instance_offset, but this results in double-transforms (something that I
have not investigated further), so now reconstruct the correct matrix
from scratch.
Maniphest Tasks: T85301
Differential Revision: https://developer.blender.org/D10285
|
|
|
|
During viewport rendering the color values were clamped in order to
apply the overlay on top of it. This clamping would show the scene
colors washed out.
This patch adds a work around to skip the clamping when the overlays are
turned off.
Parial fix for {T77909}
|
|
Match git style email addresses, ignored by the spell checker.
|
|
|
|
When using grease pencil for drawing Storyboards, it's very common to require a transform of the layers. This transform can be done using the offset modifier, but in some cases, the scene requires a lot of modifiers and makes the file hard to work.
This new feature adds a transforms Location, Rotation and Scale at Layer level, and allows to transform the layer without using a modifier, keeping the scene more clean.
{F9480695}
This feature was suggested by @pepeland after receiving feedback from several artists.
Also, done some code cleanup and rename some functions to get a better naming.
Maniphest Tasks: T83660
Differential Revision: https://developer.blender.org/D9761
|
|
This is part two of the fix for T84459.
Issue appears to be caused by AMD graphics driver later than 20.11.1 and
affects older GPUs (Polaris/FIJI cards). Drawing normals in edit mode
uses the same OpenGL data type for storing normals that is known to be
faulty.
This change fixes the face dot normals by using GPU_COMP_I16.
|
|
|
|
Issue appears to be caused by AMD graphics driver later than 20.11.1 and
affects older GPUs (Polaris/FIJI cards). Wireframe drawing uses the same
OpenGL data type for storing normals what is known to be faulty.
This patch enabled storing the normals using GPU_COMP_I16. It also
solves the normals drawing in edit mode for vertex and loop normals.
|
|
Reviewers: fclem
Differential Revision: https://developer.blender.org/D10032
|
|
Regression in 33ac3582bbd5551bdfbc7ef8856640b5e61888f8.
|
|
|
|
Stores cryptomatte hashes as meta data to the render result. Compositors could
use this for lookup on names in stead of hashes.
Differential Revision: https://developer.blender.org/D9553
|
|
This doesn't serve any purpose and can become out of sync
with the function it's self without reporting warnings.
|
|
|
|
When in edit mode, the edit lines for de-selected surfaces did not
show up.
The bug was caused by the is_gpencil bool which reused another flag.
Both grease pencil and nurbs surfaces use the edit_curve_handle shader.
A dedicated flag was added to make sure the is_gpencil bool is
set correctly.
Reviewed By: fclem
Maniphest Tasks: T84260
Differential Revision: https://developer.blender.org/D9985
|
|
This change makes it possible for platforms to only support high quality
normal rendering. This is part of {T82856} where current AMD drivers
running on the polaris architecture does not support the low quality
setting due to a driver bug.
In a next commit the work around will be enabled.
|
|
This adds high quality normals for non meshes. These include
* Volumetric Object Wireframe
* Metaballs
* Extracted Curves
* Curves in edit mode
This is in preparation to fix a regression in recent AMD
drivers where the `GL_INT_2_10_10_10_REV` data type isn't
working in Polaris cards.
|
|
|
|
Path resolving can find e.g. a datablock rather than a float or integer,
treat that as a failure to find a valid property.
|
|
Weight Paint Multi-Paint definitely depends on the weight specific
flag, and vertex group locking also involves group name symmetry
via BKE_object_defgroup_mirror_selection. These two are also
features implemented by me so I feel confident.
The rest of object_vgroup.c possibly should be changed too, but
that requires more consideration than these obvious cases.
|
|
Issue was related that the draw manager didn't invoked the draw handlers
for image editors.
|
|
|
|
Remove DNA headers, using forward declarations where possible.
Also removed duplicate header, header including it's self
and unnecessary inclusion of libc system headers from BKE header.
|
|
|
|
As proposed in T74432 and already implemented in several commits,
"region" is the preferred name for `ARegion` variables, rather than
any variant of "ar". This commit changes a few "ar" variables that have
popped up over time and also adjusted names of variants like "arnew".
|
|
Selecting an object by clicking on its instances only worked,
when the object itself is visible. However, it is possible to hide
the object and still keep the instances visible.
The solution is to give every object the correct `select_id` in the
depsgraph object iterator right before rendering.
Reviewers: fclem, brecht
Differential Revision: https://developer.blender.org/D9640
|
|
This change will use the image engine to draw the backdrop of the compositor. With this patch the alpha blending will be done in Linear Scene Reference space and shows pure emissive colors.
See differential for an example image.
**Technical changes**
As only the backdrop drawing is done using the draw manager there are some technical changes.
1. The overlay buffer is partly drawn outside the draw manager. When drawing the backdrop image the overlay buffer needs to be masked to simulate premultiplied alpha under.
2. The backdrop of the node editor is done in region pixel space. A `DRWView` is constructed with this space.
3. UDIM textures uses world position to generate the UV coordinates. This has been implemented more strict by the `IMAGE_DRAW_FLAG_USE_WORLD_POS`. When the flag isn't used the local coordinates are used to generate the UV coordinates what is image space.
4. The draw manager now checks the actual `eSpaceType` of the space data to use different code paths. In the future the movie clip editor will be added.
NOTE: The preview images in nodes are drawn in display space and cannot show pure emissive colors. As preview images are used on more locations it is best to fix this in a separate patch.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D9451
|
|
In cases where "Allow" is followed by an infinitive, a noun needs
to directly follow it. But it makes more sense to follow it with a
gerund instead.
|
|
|
|
The root cause of this bug is that the function that updates the PBVH
normals is drw_sculpt_generate_calls. As now both the overlays and
mesh can be drawn without using pbvh drawing, the normals were not
updating. This patch forces a normals updates also in the no PBVH
drawing code path of the overlays. This was affecting both shading and
sculpt surface sampling in both flat and smooth shading modes.
Having the sculpt normals being updated by the drawing code is a wrong
design which also causes other issues like:
Brushes that sample the surface and do multiple stroke steps between
redraws will sample invalid normals, creating artifacts during the
stroke clearly visible in some brushes.
Brushes that do not need to sample the surface update the normals on
each redraw. This affects performance a lot as in some cases, updating the
normals takes more time than doing the brush deformation. If flat shading
is being used, this is only necessary to do once after the stroke ends.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D9535
|
|
In the previous commit the bGPDframe parameter was removed, but this parameter is required to keep the same function signature.
|
|
|
|
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
|
|
HDRI preview should have resolution dependent on dpi, viewport scale and HDRI gizmo size.
This patch uses a LOD to render a more round sphere.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D9382
|
|
|
|
Perform grease pencil rendering delayed in this case, as there are no render
buffers available for compositing. This keeps memory usage lower, but does
involve multiple depsgraph evaluation. This seems in line with the intent of
the save buffers feature, to use minimal memory.
|
|
|
|
|
|
|
|
|
|
|
|
This patch will apply the view transform when a movie clip is used as
camera background image. It does this by rendering the image in the
color buffer when it needs the view transform. For other images it uses
the overlay buffer.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7067
|
|
Issue was that the `tris_per_mat` are not created when the first batch is drawn
during select operator and then is not created when needed by the workbench pass
since they are not tracked by mesh_buffer_cache_create_requested.
This change will create the `tris_per_mat` just in case they are needed later.
Solution by Clément Foucault
Differential Revision: https://developer.blender.org/D9430
|
|
|
|
|
|
This patch allows the user to type a property name into the
Attribute node, which will then output the value of the property
for each individual object, allowing to e.g. customize shaders
by object without duplicating the shader.
In order to make supporting this easier for Eevee, it is necessary
to explicitly choose whether the attribute is varying or uniform
via a dropdown option of the Attribute node. The dropdown also
allows choosing whether instancing should be taken into account.
The Cycles design treats all attributes as one common namespace,
so the Blender interface converts the enum to a name prefix that
can't be entered using keyboard.
In Eevee, the attributes are provided to the shader via a UBO indexed
with resource_id, similar to the existing Object Info data. Unlike it,
however, it is necessary to maintain a separate buffer for every
requested combination of attributes.
This is done using a hash table with the attribute set as the key,
as it is expected that technically different but similar materials
may use the same set of attributes. In addition, in order to minimize
wasted memory, a sparse UBO pool is implemented, so that chunks that
don't contain any data don't have to be allocated.
The back-end Cycles code is already refactored and committed by Brecht.
Differential Revision: https://developer.blender.org/D2057
|
|
|