Age | Commit message (Collapse) | Author |
|
The files are now split up into the following sections:
- `BKE_anim_path.h` and `anim_path.c` for path/curve functions.
- `BKE_anim_visualization.h` and `anim_visualizationanim_path.c` for
animation visualization (mostly motion paths).
- `BKE_duplilist.h` for DupliList function declarations. These were
already implemented in `object_dupli.c`, so they were rather out of
place being declared in `BKE_anim.h` in the first place.
No functional changes.
|
|
This was already the case in most parts of the GPU API.
Use full name for descriptive-comments.
|
|
In Blender 2.81 we update and draw all nodes inside the view planes.
When navigating with a pen tablet after an operation that tags the whole
mesh to update (like undo or inverting the mask), this introduces some
lag as nodes are updating when they enter the view. The viewport is not
fully responsive again until all nodes have entered the view after the
operation.
This commit delays nodes updates until the view navigation stops, so the
viewport navigation is always fully responsive. This introduces some
artifacts while navigating, so it can be disabled if you don't want to
see them.
I'm storing the update planes in the PBVH. This way I can add support
for some tools to update in real-time only the nodes inside this plane
while running the operator, like the mesh filter.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6269
|
|
|
|
Due to legacy this overlay was implemented twice (Edit Mesh and Weight
Painting) with different results. This patch consolidates both drawing
and uses only the Weight Painting drawing.
|
|
Armatures"
This reverts commit 782e6ea4edd9cb09f2583c8f28a24d6330dc6ce8.
Said fix introduced a crash the moment one goes to edit mode.
|
|
Due to legacy this overlay was implemented twice (Edit Mesh and Weight
Painting) with different results. This patch consolidates both drawing
and uses only the Weight Painting drawing.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7289
|
|
Draw batch extraction wrongly assumed that when mapped extraction
happened that all original data could be found. This is not the case as
mapped extraction is also enabled when part of the data is present.
This fix does additional nullptr checks.
|
|
Do not draw the facing overlay during selection.
|
|
EEVEE and Workbench both had the same issue that they continue with the
last sample when leaving navigating. This is ok for regular meshes as
they are all the same. For multiresolution it ain't as a low res version
of the mesh is used during navigation.
This patch also resets the AA samples when the user leaves navigation.
|
|
This value is not used by new engine.
|
|
|
|
This was caused by a flag not being reset in time, causing discard of
batches already queued to be drawn.
|
|
Differential Revision: https://developer.blender.org/D7280
|
|
This was caused by an unitialized variable.
|
|
|
|
This does not change the ouput much.
|
|
When using generative modifiers too many center dots were rendered in
the normal overlay. This patch only renders the normals of original
center dots.
Known issue: decoding the `norAndFlag` has issues on Intel GPU.
|
|
The loop normals were always drawn. We used to only draw the normals if
it was mapped to an original loop of the mesh. Due to recent changes we
can not find the correct loop and decide if we need to draw them.
Note still need to check the face dots normals. This is more complicated
as facedot normals needs to be encoded in a different way
|
|
The paint mask overlay showed the wires and edges of the final mesh.
This change will only draw wires and edges that are mapped to the
original mesh.
This change enables mapping data in regular Mesh extraction. This
can also be used for better drawing of the normal overlay.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7277
|
|
Edges were hard to see in some cases in edit-mesh vertex/face modes.
Since 804e90b42d72 alpha is handled differently,
update edge alpha to visually match 2.82.
|
|
Edges with sharpness, seam and bevel are thicker and thus needs more offset
to not appear aliased.
Based on D5448 by @oficsu
|
|
The previous offset was done in view space. It is now done in NDC space
to avoid differences when adjusting the near/far plane distances.
|
|
|
|
Result of poor shader pre-processing on Intel HD 4000 drivers
|
|
|
|
|
|
|
|
Problem is that the RenderEngines will change the RenderData cfra when
rendering (when time remapping is used -- at least workbench/eevee/
gpencil do a combination of BKE_scene_frame_get() plus
RE_GetCameraWindow() which alters the RenderData cfra).
Later on in the pipeline, the Compositor will use this RenderData cfra
to determine the output file name for the FileOutput node. (In contrast
to this, the 'regular' Output will use the Scene's RenderData -- not the
Render's -- cfra [which hasnt been altered])
It is not entirely clear why RE_GetCameraWindow was setting the cfra on
the Render, but it appears to be legacy OGL rendering related and is not
needed anymore.
Removing this will keep the cfra as needed for the Compositor FileOutput
node.
|
|
Also rename START to BEGIN (matching BEGIN/END for most iterator macros).
|
|
|
|
|
|
This new method is only enabled if Overlay Smooth Wire is enabled.
This method gives really nice results but has some downside:
- Require a depth copy or loose the ability to write wire depth to the
depth buffer and have correct depth ordering of wires. This patch use the former, with its associated cost.
- Require some depth sampling and prevent early depth test (i.e: has
some performance impact).
- Has some relatively minor instability with geometry that are perpendicular
to the view and intersecting with other geometry.
Pros:
- Compared to a fullpass approach this is surely going to have less
performance impact and much higher quality.
- Removes the additional vertex offset. (see T74961)
- Fixes all half edges z-fighting.
{F8428014}
{F8428015}
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7233
|
|
The default face set color is white, so we can skip drawing the default
face set. This allows to enable again the optimization of not drawing
overlays in nodes where the mask is empty.
This will still slow down the viewport when a new face set is created
for the whole mesh or when inverting the mask, like in previous
versions.
I also renamed the function to make more clear that now it is checking
for both mask and face sets.
Reviewed By: brecht
Maniphest Tasks: T74692
Differential Revision: https://developer.blender.org/D7207
|
|
The previous implementation tested the normal behavior and ignored some
edge cases. This patch will also test for NULL in all cases
|
|
Weight paint overlay was not working when XRay was turned on.
The Weight Paint overlay is rendered directly into the default
framebuffer with a depth equal test. This test fails as the depth won't match.
This patch will update the depth buffer in these cases.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D7176
|
|
Only must fade if the active object is a GPencil.
|
|
This issue became visible after fixing other TAA issues recently.
The sample count of the first frame wasn't reset resulting that the
incorrect resolve took place. This issue was already there beforehand,
it is just much clearer during the recent changes.
Now the `taa_sample will be reset when performing an animation playback
in the 3d viewport.
|
|
Work around GLSL compiler bug with backslash in preprocessor macros.
|
|
|
|
This patch adds support for alpha hash for hair rendering in EEvee. Here's a comparison of with alpha hashing:
{F7588610}
And no alpha hashing:
{F7588615}
Note that this needs "soft shadows" enabled, otherwise shadows will be noisy; here's a render with soft shadows disabled:
{F7588621}
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5221
|
|
This makes the offset dependent of the actual near and far clip distances.
|
|
When the TAA is finished the screen can still be redrawn by other
operations without the TAA resets.
If that happened the TAA did add a blank sample to the result as the
scene wasn't drawn, but the was processed.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7226
|
|
This reverts commit 58ac113b76d950c72c7319094f7e6cc61c70dc59.
|
|
the settings
Caused by rBc476c36e4008.
This hooks into the existing FIXME (workaround for a missing update
tagging), reactivates the NS_VIEW3D_GPU notifier (introduced in
rB2ad3d8f158d2 -- but not going anywhere atm.) to check changes to rv3d
rflag which indicated UserStudioLight has changed. To not have updates
all the time, the rflag also needs to be cleared again (see original
rB2ad3d8f158d2).
Maniphest Tasks: T74744
Differential Revision: https://developer.blender.org/D7194
|
|
Caused by rBc476c36e4008.
This hooks into the existing FIXME (workaround for a missing update
tagging), needs to also check the clip_state (to detect
changes in DRW_STATE_CLIP_PLANES).
Maniphest Tasks: T74872
Differential Revision: https://developer.blender.org/D7193
|
|
Caused by rBc476c36e4008.
This hooks into the existing FIXME (workaround for a missing update
tagging from operators), needs to also check the shading.flag (to detect
changes in V3D_SHADING_MATCAP_FLIP_X).
Differential Revision: https://developer.blender.org/D7192
|
|
Caused by rB9516921c05bd.
Dont really see a reason to draw overlays here if overlays are disabled.
Looks like this only affects Face/Vertex mask selection drawing [which
should indeed be hidden when overlays are disabled] next to two
exceptions:
- OVERLAY_paint_vertex_cache_populate draws weights as well [D7176 /
T70807 might be related here, but to me it looks like drawing weights
here is actually not needed at all]
- OVERLAY_paint_texture_cache_populate calls
DRW_cache_mesh_surface_texpaint_get [not sure about this one, this is
also called from workbench_cache_texpaint_populate, looks like this is
not needed when overlays are hidden]
Maniphest Tasks: T74096
Differential Revision: https://developer.blender.org/D7179
|
|
The looptri is repeated in the linked Meshes but the pointer
is only referenced in the evaluated ones.
This reverts commit 64982e213f014123d1b0406cf9ae893910a6a3d3.
|
|
When the TAA is finished the screen can still be redrawn by other
operations without the TAA needs to be reset.
If that happened the TAA did add a blank sample to the result.
This patch will add an early exit in the case TAA was finished. Note
that there are still some cases still not working. The overlay engine
can in certain circumstances draw directly into the default_fb what can
lead to render artifacts.
|