| Age | Commit message (Collapse) | Author |
|---|
|
The only real difference between `GPU_SHADER_2D_UNIFORM_COLOR` and
`GPU_SHADER_3D_UNIFORM_COLOR` is that in the vertex shader the 2D
version uses `vec4(pos, 0.0, 1.0)` and the 3D version uses
`vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
This will simplify porting shaders to python as it will not be
necessary to use a 3D and a 2D version of the shaders.
In python the new name for '2D_UNIFORM_COLOR'' and '3D_UNIFORM_COLOR'
is 'UNIFORM_COLOR', but the old names still work for backward
compatibility.
Differential Revision: https://developer.blender.org/D15836
|
|
Adds `rna_path.cc` and `RNA_path.h`.
`rna_access.c` is a quite big file, which makes it rather hard and
inconvenient to navigate. RNA path functions form a nicely coherent unit
that can stand well on it's own, so it makes sense to split them off to
mitigate the problem. Moreover, I was looking into refactoring the quite
convoluted/overloaded `rna_path_parse()`, and found that some C++
features may help greatly with that. So having that code compile in C++
would be helpful to attempt that.
Differential Revision: https://developer.blender.org/D15540
Reviewed by: Brecht Van Lommel, Campbell Barton, Bastien Montagne
|
|
Removes the following macros for scene/render frame values:
- `CFRA`
- `SUBFRA`
- `SFRA`
- `EFRA`
These macros don't add much, other than saving a few characters when typing.
It's not immediately clear what they refer to, they just hide what they
actually access. Just be explicit and clear about that.
Plus these macros gave read and write access to the variables, so eyesores like
this would be done (eyesore because it looks like assigning to a constant):
```
CFRA = some_frame_nbr;
```
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D15311
|
|
Grease Pencil animation channels are now also shown in the Dopesheet
mode of the Dopesheet editor and in the Timeline.
Grease pencil related events are now listened not only by container
`SACTCONT_GPENCIL` (Grease Pencil Dopesheet), but also
`SACTCONT_DOPESHEET` (main Dopesheet), and `SACTCONT_TIMELINE`
(timeline).
A new Animation Filter flag was added: `ANIMFILTER_FCURVESONLY`. For now
this only filters out Grease Pencil Layer channels.
**Implemented:**
- Preview range set: now only considers selected Grease Pencil keyframes
when `onlySel` parameter is true. Not only this allows the operator to
work with grease pencil keyframes in main dopesheet, but it also fixes
the operator in the Grease Pencil dopesheet.
- Translation: allocation (and freeing) of specific memory for
translation of Grease Pencil keyframes.
- Copy/Paste: call to both Fcurve and GPencil operators, to allow for
mixed selection. Errors are only reported when both the FCurve and
GPencil functions fail to paste anything.
- Keyframe Type change and Insert Keyframe: removed some code here to
unify Grease Pencil dopesheet and main dopesheet code.
- Jump, Snap, Mirror, Select all/box/lasso/circle, Select left/right,
Clickselect: account for Grease Pencil channels within the channels
loop, no need for `ANIMFILTER_FCURVESONLY` there.
**Not Implemented:**
- Graph-related operators. The filter `ANIMFILTER_FCURVESONLY` is
naively added to all graph-related operators, meaning more-or-less all
operators that used `ANIMFILTER_CURVE_VISIBLE`.
- Select linked: is for F-curves channel only
- Select more/less: not yet implemented for grease pencil layers.
- Clean Keys, Sample, Extrapolation, Interpolation, Easing, and Handle
type change: work on Fcurve-channels only, so the
`ANIMFILTER_FCURVESONLY` filter is activated
Graying out these operators (when no fcurve keyframe is selected) can be
done with custom poll functions BUT may affect performance. This is NOT
done in this patch.
**Dopesheet Summary Selection:**
The main summary of the dopesheet now also takes into account Grease
Pencil keyframes, using some nasty copy/pasting of code, as explained
[on devtalk](https://devtalk.blender.org/t/gpencil-layers-integration-in-main-dopesheet-selection-issue/24527).
It works, but may be improved, providing some deeper changes.
Reviewed By: mendio, pepeland, sybren
Maniphest Tasks: T97477
Differential Revision: https://developer.blender.org/D15003
|
|
|
|
Selecting Action channel in NLA now sets the context in the N-panel. The
actively selected channel is now also drawn in a different way, so that
it's visible which one is selected.
Old:
- The NLA sidebar didn't refresh with the creation of a new action.
- There was no indication of the action channel being selected.
New:
- NLA side bar now refreshed when keyframes are added (new action is created)
- Clicking on the action channel now gives visual indication of being selected
Reviewed By: RiggingDojo, sybren
Maniphest Tasks: T97372
Differential Revision: https://developer.blender.org/D14820
|
|
Reviewed By: Blendify
Maniphest Tasks: T97631
Differential Revision: https://developer.blender.org/D14766
|
|
|
|
These were missed in previous passes. Also remove some logic
in `draw_hair.c` that was redundant after f31c3f8114616bb8964c8e7.
|
|
When showing an action data-block added to a library overridden object
in the Graph Editor, the visibility toggles would be disabled.
Toggling the visibility should be possible still and works with the
shortcuts, just the button was incorrectly disabled.
Also added the usual disabled hint for the tooltip.
Differential Revision: https://developer.blender.org/D14568
Reviewed by: Bastien Montagne
|
|
Add new `BKE_id_is_editable` helper in `BKE_lib_id.h`, that supercedes
previous check (simple `ID_IS_LINKED()` macro) for many editing cases.
This allows to also take into account 'system override' (aka
non-editable override) case.
Ref: {T95707}.
|
|
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3dbec we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
|
|
|
|
Contributed by luzpaz.
Ref D14271, D14270
|
|
|
|
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
|
|
There was an inconsistency between icons.
|
|
Ref T92709
|
|
Add a new 'selected_visible_actions' property to allow querying
actions that are selected in animation related editors for use in
UI and operators. The 'selected_editable_actions' variant excludes
linked actions (the only reason an action can be read-only).
In the Action and Shape Key editors there is only one action
that is specified by the field at the top of the editor.
In Dope Sheet it scans the channel rows and returns all actions
related to the selected items. This includes summary items for
actions and groups.
In Graph Editor, it lists actions associated with selected curves.
The new property is also used for Copy To Selected and Alt-Click.
Ref D11803
|
|
Contributed by luzpaz.
Differential Revision: https://developer.blender.org/D13264
|
|
|
|
|
|
|
|
|
|
Includes fixes to misspelled function names.
Ref D11280
|
|
Dope Sheet to Properties
Properties Editor is a bit more picky (compared to the Outliner for
example) when it comes to listening to grease pencil notifiers -- it
requires the action to be set.
So when adding the notifier in the dopesheet from the channels (done in
`achannel_setting_flush_widget_cb`), now add the `NA_EDITED` action.
Maniphest Tasks: T87640
Differential Revision: https://developer.blender.org/D11025
|
|
|
|
|
|
Passing 4x arguments for the rectangle,
mixed in with round-box radius & color wasn't very readable.
Instead, pass a `rctf` as the first argument to UI box drawing functions.
|
|
No intended functional changes.
Refactors animsys_evaluate_nla() into 2 versions:
animsys_evaluate_nla_for_keyframing(), animsys_evaluate_nla_for_flush()
to make it clear what data is being calculated and why.
Dummy strip creation has been refactored to two separate functions,
animsys_create_tweak_strip() and animsys_create_action_track_strip().
Both are evaluated differently from other strips and eachother. There's
no need to interweave them. A future patch D8296, generally requires
both strips.
___
XXX anim_sys.c) nlatrack_find_tweaked() is a temporary work around.
If anyone has any insight into this problem, help is appreciated.
Reviewed by: sybren
Differential Revision: http://developer.blender.org/D9696
|
|
Fix keyframe properties not being editable when animating a
library-overridden datablock.
The problem was that RNA pointers were created based on the datablock
affected by the animation (for example an Object), instead of the
datablock that contains the FCurve itself (the Action). The latter can
be local to the current blend file and should thus be editable, even
when the former is not.
Reviewed By: mont29
Maniphest Tasks: T81965
Differential Revision: https://developer.blender.org/D10091
|
|
Change the top coordinate of the animation channel list UI elements to
`rect->ymin` so they correctly span from `rect->ymin` to
`channel_height`.
Some buttons in the dope sheet channels didn't scale properly with the
`Keyframe Scale Factor` preferences setting. This was caused by using
the `ymid` value (`ymid = BLI_rctf_cent_y(rect) - 0.5f * ICON_WIDTH`) to
position the buttons that supposed to fill all vertical space in the
channel (with `channel_height` height). The `ymid` value is only
appropriate for the UI elements that with `ICON_WIDTH` height.
Maniphest Tasks: T83716
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D9841
|
|
Move the "Show Group Colors" toggle from a per-editor option to a single
user preference in the Animation preferences. The Grease Pencil
animation channel side panel allows picking a channel color; this now
shows a message when channel colors are disabled.
The old "Show Group Colors" toggle had to be set per editor, and was on
by default. This meant that disabling group colors would require an
action for every file, for every editor. It is very hard to select a
color that works both as bone color in the 3D Viewport (needs to be
bright there) as well as the channel list (needs to be dark there), most
animators turn channel list colors off.
Differential Revision: https://developer.blender.org/D9391
|
|
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
Avoid overwriting user-chosen `SACTION_SLIDERS` flag when switching the
Dope Sheet editor to Shape Key mode. The Shape Key mode now ignores the
flag, and always shows the sliders.
The obvious limitation is that you can't hide the sliders in the Shape
Key editor anymore
Reviewed By: looch, sybren
Differential Revision: https://developer.blender.org/D9121
|
|
|
|
|
|
|
|
We now use GPU_blend for enabling / disabling blending and explicitly
set the blend equation.
|
|
|
|
Custom driver functions need access to the dependency graph that is
triggering the evaluation of the driver. This patch passes the
dependency graph pointer through all the animation-related calls.
Instead of passing the evaluation time to functions, the code now passes
an `AnimationEvalContext` pointer:
```
typedef struct AnimationEvalContext {
struct Depsgraph *const depsgraph;
const float eval_time;
} AnimationEvalContext;
```
These structs are read-only, meaning that the code cannot change the
evaluation time. Note that the `depsgraph` pointer itself is const, but
it points to a non-const depsgraph.
FCurves and Drivers can be evaluated at a different time than the
current scene time, for example when evaluating NLA strips. This means
that, even though the current time is stored in the dependency graph, we
need an explicit evaluation time.
There are two functions that allow creation of `AnimationEvalContext`
objects:
- `BKE_animsys_eval_context_construct(Depsgraph *depsgraph, float
eval_time)`, which creates a new context object from scratch, and
- `BKE_animsys_eval_context_construct_at(AnimationEvalContext
*anim_eval_context, float eval_time)`, which can be used to create a
`AnimationEvalContext` with the same depsgraph, but at a different
time. This makes it possible to later add fields without changing any
of the code that just want to change the eval time.
This also provides a fix for T75553, although it does require a change
to the custom driver function. The driver should call
`custom_function(depsgraph)`, and the function should use that depsgraph
instead of information from `bpy.context`.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D8047
|
|
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/animation` module.
No functional changes.
|
|
After talking with UI team, we decided to change the tooltip.
|
|
The old tooltip was not clear enough
|
|
|
|
It is just a quick fix for the tooltips in the graph editor, it replaces:
- "F-curve modifiers are disabled" with "Enable F-Curve modifiers"
- "F-curve is visible in graph editor for editing" with "F-Curve visibility in Graph Editor".
Reviewed By: billreynish
Maniphest Tasks: T75519
Differential Revision: https://developer.blender.org/D7387
|
