| Age | Commit message (Collapse) | Author |
|---|
|
Ref T92709
|
|
Avoid blocking the UI when searching for animation channels with Ctrl+F.
Instead of showing a single text input in a blocking popup, Ctrl+F now
just focuses the search box above the channel list. It feels nicer to
use and has the niceties that come from using that textbox, like
searching per keystroke, compared to the old pop-up method.
As the behaviour of the operator has changed considerably, this also
changes the operator name from `anim.channels_find` to
`anim.channels_select_filter` and updates the keymaps.
Reviewed By: ChrisLend, sybren
Differential Revision: https://developer.blender.org/D12146
|
|
The channel box selection was offset for grease pencil layers.
This is a proposed fix by @yann-lty
Before:
{F10227973}
After:
{F10227974}
Reviewed By: #grease_pencil, antoniov
Maniphest Tasks: T89952
Differential Revision: https://developer.blender.org/D11962
|
|
|
|
Correctly reset `prev` and `next` pointers of action group FCurves when
separating them into distinct `ListBase`s per `bActionGroup`.
These `NULL` pointers are necessary to temporarily demarcate the start &
end of the `bActionGroup::channels` list. Having them still point to
other FCurves caused ordering issues when moving curves towards the
start/end of a group.
This commit corrects the above issue and adds versioning code to rectify
any ordering issues that may have been caused. For this purpose the
`BKE_action_groups_reconstruct()` function is rewritten to avoid relying
on the `bAction::curves` list order or `prev` link integrity.
Differential Revision: https://developer.blender.org/D11811
|
|
|
|
Similar to rBb4530deec478, just add appropriate notifier.
Maniphest Tasks: T89484
Differential Revision: https://developer.blender.org/D11724
|
|
|
|
|
|
Fix segmentation fault that can occur when reordering animation
channels.
Under some specific conditions, the list "act->curves" is empty in the
"join_groups_action_temp" function. In particular, this happens when a
scene contains an action that has not been pushed down, and with no
keyframe in it.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D11569
|
|
When doing a box selection in the dopesheet in the header area, the data block type was changed to annotation because the pointer was not usable and produced an unexpected result.
Thanks to @pullup for finding a way to reproduce the bug.
|
|
Following naming convention of most operators.
|
|
Changes include using proper and consistent grammar, simplifying
phrasing, using correct terminology, and not including python API
identifiers in tooltips.
Differential Revision: https://developer.blender.org/D9924
|
|
|
|
Check for selection status beforec learing the "active" flag from an
FCurve. This allows the "Select All Curves" operator to retain what is
seen as the active curve.
|
|
|
|
Regression from d8992192e5512380f57433df113f3e3f8b22f7cb
The original code relied on having a separate edit-object pointer
than the active object.
|
|
Outliner display under 'Animation' > 'NLA Tracks' was not updating in
the following cases:
- adding strips
- removing strips
- duplicating strips (possibly to different track)
- swapping strips
- reordering tracks
- changing strip order by translating
- translating strips between tracks
- renaming tracks
In the case of deleting strips/tracks, this was also resulting in a use-
after-free error in Outliner drawing code (this was reported specifically
in T84586).
Most of these operators already sent a ND_NLA|NA_EDITED notifier, but the
Outliner is not listening to these. Listening to NA_EDITED is also not
what we want since this also happens a lot in cases irrelevant to the
Outliner. Now be a bit more specific and send ND_NLA|NA_ADDED / ND_NLA|
NA_REMOVED or a new ND_NLA_ORDER (to distinguish from NA_EDITED
'only' - where a redraw is not neccessary) and listen to these from the
Outliner.
(note: places that were listening to ND_NLA|NA_EDITED before are also
listening to NA_ADDED or NA_REMOVED, so changing NA_EDITED should not be
a problem here)
(note 2: for cases like swapping tracks/strips order, NA_ADDED or
NA_REMOVED does not make sense, neither can we use NA_EDITED [since we
dont want to listen to this], so in this case an additional ND_NLA_ORDER
is now sent)
(note 3: in nla transform code, this is now always sent on confirm. There
are cases were the notifier would not be needed, but checking exactly all
cases were it actually would be needed seems overkill [history of D10073
has example code to check if strips moved between tracks])
Maniphest Tasks: T84586
Differential Revision: https://developer.blender.org/D10073
|
|
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
|
|
Also makes NLA tracks and strips overridable.
User can either edit existing strips in existing NLA tracks (but not add or remove them), and/or add new NLA tracks after those comming from the linked data.
Most of the work was as usual checking operators and adding protections against illegal operations in override context.
Note that since we can only rely on indices to deal with local added tracks, we forbid any local track being before any linked/original track.
Maniphest Tasks: T72629
Differential Revision: https://developer.blender.org/D9611
|
|
Fix various problems in the Action Group rearranging code. All fixes are
necessary to resolve the bug.
- Before groups are rearranged, the channels are moved into their
respective groups (so no longer referenced by `action->channels`). A
temporary group is made for ungrouped channels. The code made
assumptions about the channels being in the same order as the groups;
that assumption has been removed.
- Looping over channels in an Action Group should stop when reaching the
last channel, and not until `NULL`.
- After all the reshuffling is done, the `action->channels` linked list
wasn't terminated properly. Now `first.prev` and `last.next` are set
to `NULL` to avoid infinite loops.
|
|
Some minor cleanups to make an upcoming bugfix easier.
No functional changes.
|
|
Remove accidentally-commited debug prints.
No functional changes.
Reviewed by: sergey
Differential Revision: https://developer.blender.org/D9637
|
|
So a keyframed e.g. location slider would stay yellow/green even if its
corresponding channel was removed.
Needs a appropriate notifier so the listeners (e.g.
buttons_area_listener, view3d_buttons_region_listener) would cause a
redraw.
Maniphest Tasks: T82364
Differential Revision: https://developer.blender.org/D9438
|
|
No functional changes.
|
|
Split up `ANIM_deselect_anim_channels()` into
`ANIM_anim_channels_select_set()` and
`ANIM_anim_channels_select_toggle()`.
`ANIM_anim_channels_select_set()` is equivalent to the old
`ANIM_deselect_anim_channels(..., false, ACHANNEL_SETFLAG_xxx)`.
`ANIM_anim_channels_select_toggle()` is equivalent to the old
`ANIM_deselect_anim_channels(..., true, ACHANNEL_SETFLAG_ADD)`.
`ANIM_deselect_anim_channels(..., true, ACHANNEL_SETFLAG_CLEAR)` was
also called once. The `true` parameter suggested the "toggle" behaviour
was intended, but the `ACHANNEL_SETFLAG_CLEAR` argument prevented any
toggling. This is now replaced with `ANIM_anim_channels_select_set(ac,
ACHANNEL_SETFLAG_CLEAR)` to make this explicit.
No functional changes, just a cleanup in order to better understand how
the selection works.
|
|
Rename `animchannels_deselectall_exec` → `animchannels_selectall_exec` so
that it matches the operator `ANIM_OT_channels_select_all`.
No functional changes.
|
|
Avoid WM notification when a dummy channel is clicked in the animation
channel list (dopesheet, graph editor) if that channel has no animation
data.
|
|
Clean up some code by using early returns.
No functional changes.
|
|
Clean up the code that handles mouse clicks on animation channels in the
non-NLA animation editors, by splitting into separate functions.
No functional changes.
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
Cleanup old tracker task format to the new. e.g: [#34039] to T34039
Ref D8718
|
|
Simplify `anim_flush_channel_setting_up()` by flipping conditions and
returning early. This makes it easier to understand what is actually
happening in the code.
No functional changes.
|
|
Split up `ANIM_flush_setting_anim_channels()` into smaller functions. This
makes it easier to understand how it works, and makes future improvements
also easier.
No functional changes.
|
|
Also correct wrapped lines of example code in threads.cc.
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/animation` module.
No functional changes.
|
|
|
|
|
|
The `ANIMFILTER_NODUPLIS` option, to prevent duplicates in the list of
animation data to be freed, was missing. This caused a use-after-free.
|
|
This data block will be the container for simulation node trees.
It will be used for the new particle node system (T73324).
The new data block has the type `ID_SIM`.
It is not visible to users and other developers by default yet.
To enable it, activate the cmake option `WITH_NEW_SIMULATION_TYPE`.
New simulation data blocks can be created by running `bpy.data.simulations.new("name")`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7225
|
|
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
|
|
Follow up of b2ee1770d4c3 and 10c2254d412d, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
|
|
Only the volume object is exposed in the user interface. It is based on OpenVDB
internally. Drawing and rendering code will follow in another commit.
https://wiki.blender.org/wiki/Source/Objects/Volume
https://wiki.blender.org/wiki/Reference/Release_Notes/2.83/Volumes
Hair and PointCloud object types are hidden behind a WITH_NEW_OBJECT_TYPES
build option. These are unfinished, and included only to make it easier to
cooperate on development in the future and avoid tricky merges.
https://wiki.blender.org/wiki/Source/Objects/New_Object_Types
Ref T73201, T68981
Differential Revision: https://developer.blender.org/D6945
|
|
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
|
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
|
|
This operator was pending of fix.
|
