| Age | Commit message (Collapse) | Author |
|---|
|
|
|
data-block.
We need a specific exception to general rule 'no rename of anim channels
in liboverride data' for the locally-inserted NLA tracks.
|
|
|
|
|
|
Adhere to the documented use of `GPU_line_width()` and don't restore the
previously set line width.
|
|
NOTE: this patch originated in T98015 which was split into multiple
reports. While it could be split into multiple patches these are very
much related so keeping as one for now
This patch fixes the following issues:
[1] autokeying transforms in preview only creates keyframes if there is
an FCurve already
[2] autokeying transforms in preview only creates keyframes for
rotation/scale if rotating/scaling around cursor (should keyframe
position as well)
[3] autokeying transforms in preview does not work during animation
playback
For [1], a param was added to `ED_autokeyframe_property` which can tweak
its default behavior of only creating keyframes on already keyed
properties (which was fine because this is mostly called from buttons
where this behavior is desired). Callers such as gizmos (or the VSE in
our case) can use this additional param so that keyframes are also
created on "not-yet-keyframed" properties.
For [2], the pivot is checked and position properties also keyed if
necessary (which is also consistent with the way objects are keyed in
the 3DView)
For [3], `animrecord_check_state` was changed to be able to work on
scenes as well and the transform system in the VSE preview was made
aware of the screen's `animtimer`.
NOTE: there are still things to be improved for keyframing in the VSE,
the most obvious is probably a `keyframe_insert` operator (with
keyingsets)
Fixes T98429, T98430, T98431
Maniphest Tasks: T98015, T98431, T98430, T98429
Differential Revision: https://developer.blender.org/D15047
|
|
|
|
Fix T97974 by having the marker rendering code explicitly set the
required line width.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14890
|
|
Currently strings are used for cases where a list of identifiers would
be useful to show.
Add support for string properties to reference a callback to populate
candidates to show when editing a string. The user isn't prevented from
typing in text not found in this list, it's just useful as a reference.
Support for expanding the following strings has been added:
- Operator, menu & panel identifiers in the keymap editor.
- WM operators that reference data-paths expand using the
Python-consoles auto-complete functionality.
- Names of keying sets for insert/delete keyframe operators.
Details:
- `bpy.props.StringProperty` takes an option `search` callback.
- A new string callback has been added, set via
`RNA_def_property_string_search_func` or
`RNA_def_property_string_search_func_runtime`.
- Addresses usability issue highlighted by T89560,
where setting keying set identifiers as strings isn't practical.
- Showing additional right-aligned text in the search results is
supported but disabled by default as the text is too cramped in most
string search popups where the feature would make sense. It could be
enabled as part of other layout tweaks.
Reviewed By: brecht
Ref D14986
|
|
|
|
GPU code used `sz` as an abbreviation for size, as well as a few other
places. Use size where this represents a size in bytes, see: T85728.
|
|
|
|
Selecting Action channel in NLA now sets the context in the N-panel. The
actively selected channel is now also drawn in a different way, so that
it's visible which one is selected.
Old:
- The NLA sidebar didn't refresh with the creation of a new action.
- There was no indication of the action channel being selected.
New:
- NLA side bar now refreshed when keyframes are added (new action is created)
- Clicking on the action channel now gives visual indication of being selected
Reviewed By: RiggingDojo, sybren
Maniphest Tasks: T97372
Differential Revision: https://developer.blender.org/D14820
|
|
Reviewed By: Blendify
Maniphest Tasks: T97631
Differential Revision: https://developer.blender.org/D14766
|
|
When height is limited, it is defined by space occupied by strips,
but at least channels 1 to 7 will be always visible. This allows it to
easily overview timeline content by zooming out to maximum extent in Y
axis and panning in X axis.
More channels can be "created" on demand by moving strip to higher
channel. When strip is removed and highest channel becomes empty, view
will stay as is until it is moved down. Then new highest point is
remembered and it is not possible to pan upwards until strip is moved to
higher channel.
Limiting takes into account height of scrubbing and markers area as
well as scrollers. This means that when zoomed out to maximum extent,
no strips are obstructed by fixed UI element.
Fixes T57976
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14263
|
|
As the default handle type in Blender is 'Auto Clamped' the Equalize
Handles operator will often appear to have no affect on the selected
keyframes on which it is run. If either of the keyframes' handle types
are 'Auto', 'Auto Clamped', or 'Vector', this patch will convert the
handles to 'Aligned'.
Reviewed By: sybren
Maniphest Tasks: T96476
Differential Revision: https://developer.blender.org/D14345
|
|
Motion paths can now be initialised to more sensible frame ranges,
rather than simply 1-250:
- Scene Frame Range
- Selected Keyframes
- All Keyframes
Reviewed By: sybren, looch, dfelinto, pablico
Maniphest Tasks: T93047
Differential Revision: https://developer.blender.org/D13687
|
|
|
|
|
|
Introduced by my recent commit: {rB3acbe2d1e933}
Lead to crash when insert_keyframe_direct() was called. Keyframing
crashed for NLA special properties (influence, animated_time),
driven properties, etc.
|
|
Add a new operator, "Start Tweaking Strip Actions (Full Stack)", which
allows you to insert keyframes and preserve the pose that you visually
keyed while upper strips are evaluating,
The old operator has been renamed from "Start Tweaking Strip Actions" to
"Start Tweaking Strip Actions (Lower Stack)" and remains the default for
the hotkey {key TAB}.
**Limitations, Keyframe Remapping Failure Cases**:
1. For *transitions* above the tweaked strip, keyframe remapping will
fail for channel values that are affected by the transition. A work
around is to tweak the active strip without evaluating the upper NLA
stack.
It's not supported because it's non-trivial and I couldn't figure it
out for all transition combinations of blend modes. In the future, it
would be nice if transitions (and metas) supported nested tracks
instead of using the left/right strips for the transitions. That
would allow the transitioned strips to overlap in time. It would also
allow N strips to be part of the (previously) left and right strips,
or perhaps even N strips being transitioned in sequence (similar to a
blend tree). Proper keyframe remapping through all that is currently
beyond my mathematical ability. And even if I could figure it out,
would it make sense to keyframe remap through a transition?
//This case is reported to the user for failed keyframe insertions.//
2. Full replace upper strip that contains the keyed channels.
//This case is reported to the user for failed keyframe insertions.//
3. When the same action clip occurs multiple times (colored Red to
denote it's a linked strip) and vertically overlaps the tweaked
strip, then the remapping will generally fail and is expected to
fail.
I don't plan on adding support for this case as it's also non-trivial
and (hopefully) not a common or expected use case so it shouldn't be
much of an issue to lack support here.
For anyone curious on the cases that would work, it works when the
linked strips aren't time-aligned and when we can insert a keyframe
into the tweaked strip without modifying the current frame output of
the other linked strips. Having all frames sampled and the strip
non-time aligned leads to a working case. But if all key handles are
AUTO, then it's likely to fail.
//This case is not reported to the user for failed keyframe
insertions.//
4. When using Quaternions and a small strip influence on the tweaked
Combine strip. This was an existing failure case before this patch
too but worth a mention in case it causes confusion. D10504 has an
example file with instructions.
//This case is not reported to the user for failed keyframe insertions. //
5. When an upper Replace strip with high influence and animator keys to
Quaternion Combine (Replace is fine). This case is similar to (4)
where Quaternion 180 degree rotation limitations prevent a solution.
//This case is not reported to the user for failed keyframe insertions.//
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D10504
|
|
Add operator to select markers left/right of the current frame
(including the current frame).
`bpy.ops.marker.select_leftright(mode='LEFT', extend=False)`
`mode` can be either 'LEFT' or 'RIGHT'.
The naming and defaults of the above variables match similar operators
(e.g., `bpy.ops.nla.select_leftright`)
This also adds a new sub-menu to the Marker menu found in animation
editors, exposing both the new `bpy.ops.marker.select_leftright`
operator as well as the `bpy.ops.marker.select_all` operator.
Despite the name "Before Current Frame" and "After Current Frame", it
also selects a marker that falls on the current from for both of the
modes. This is to match the behavior found in the `nla.select_leftright`
operator.
RCS: https://blender.community/c/rightclickselect/OgmG/
Reviewed by: sybren, looch
Differential Revision: https://developer.blender.org/D14176
|
|
These were missed in previous passes. Also remove some logic
in `draw_hair.c` that was redundant after f31c3f8114616bb8964c8e7.
|
|
It was not possible to assign a shortcut to menu items in the insert
key-frame menu going back to version 2.7x. Doing so would replace the
current key that opens the insert keyframe menu (I-key by default),
instead of binding a key to insert a key-frame for the keying-set
referenced by the menu item.
Now each menu item can be bound to a key or added to the "Quick
Favorites" menu, directly inserting a key-frame for the corresponding
keying-set.
Note that users must use the operator `anim.keyframe_insert_by_name`
when setting up key-shortcuts as `anim.keyframe_insert` is only intended
to launch the menu.
Keymap Editor:
When editing these key-map items in the key-map editor, the keying-set
identifier must be used. At the moment the key-map editor doesn't
support showing a drop-down list. The identifiers can be used from the
tool-tip or the info editor.
{F12994924}
Details:
Use `ANIM_OT_keyframe_insert_by_name` instead of
`ANIM_OT_keyframe_insert_menu` for the insert keyframe popup menu to
resolve the following issues binding keys to keying sets:
- The index of the keying set isn't stable (adding/removing keying sets
may change it).
- Binding a key to items in the popup menu triggers a popup instead of
inserting a key using the keying set from the menu item.
While support for using the current operator could be improved, it will
still only work for built-in keying sets, so I'd prefer to use an
operator that is intended for key-bindings.
Besides supporting binding keys to menu items there are no functional
changes.
Reviewed By: sybren
Ref D14289
|
|
When showing an action data-block added to a library overridden object
in the Graph Editor, the visibility toggles would be disabled.
Toggling the visibility should be possible still and works with the
shortcuts, just the button was incorrectly disabled.
Also added the usual disabled hint for the tooltip.
Differential Revision: https://developer.blender.org/D14568
Reviewed by: Bastien Montagne
|
|
Calling duplicate operation without selecting anything registers an undo
step. If nothing is selected (keyframe, curve, object, etc.), cancel the
operator execution to prevent undo push.
Patch improves following operators:
- ACTION_OT_duplicate
- GPENCIL_OT_duplicate
- GRAPH_OT_duplicate
- MESH_OT_duplicate
- NODE_OT_duplicate
- OBJECT_OT_duplicate
Reviewed By: campbellbarton
Ref D14511
|
|
Add new `BKE_id_is_editable` helper in `BKE_lib_id.h`, that supercedes
previous check (simple `ID_IS_LINKED()` macro) for many editing cases.
This allows to also take into account 'system override' (aka
non-editable override) case.
Ref: {T95707}.
|
|
|
|
This reverts commit e55f4657f7b7ae8ac915eefd633d08ae56bb3574.
It's not intended to support assigning shortcuts to this operator,
which could only work for built-in keying sets caused warnings to be
reported warnings when exporting key-maps.
Prefer D14289, preventing users running into this problem to begin with.
|
|
Caused by rBc0bd240ad0a1.
To avoid crash, make boolean value false if active object data is NULL.
Should be backported to 2.93 LTS and 3.1 corrective releases.
|
|
Add a new operator to the Graph Editor that blends selected keyframes
to their default value.
The operator can be accessed from
Key>Slider Operators>Blend To Default Value
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9376
Ref: D9367
|
|
|
|
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3dbec we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
|
|
This reverts commit 1558b270e9fcbc2e23fa248b0e7e770dddae155c.
An earlier commit (rB101fadcf6b93c) introduced some new functionality,
which was overlooked in reviewing this commit & got broken.
Will re-commit after the issue has been fixed.
Ref: D13687
|
|
Activating a gizmo used the windows eventstate which may have values
newer than the event used to activate the gizmo.
This meant transforms check for the key that activated transform
could be incorrect.
Support passing an event when calling operators to avoid this problem.
|
|
`3DView`'s `use_snap` option has little or nothing to do with using
snapping in `UV`, `Nodes` or `Sequencer`.
So there are no real advantages to keeping these options in sync.
Therefore, individualize the option to use snap for each "spacetype".
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13310
|
|
|
|
Contributed by luzpaz.
Ref D14271, D14270
|
|
|
|
Pass NULL instead of an empty string.
|
|
Error in 1a12c9edab4ac89c8a87c20ad3a2195d0e681bc8,
also correct descriptions.
|
|
Include built-in keying sets when ANIM_keying_sets_enum_itemf is called
without a context to allow binding keys to built-in keying sets.
|
|
|
|
|
|
The polynomial parameters were not shown correctly.
Differential Revision: https://developer.blender.org/D14254
|
|
Fix an assert by commenting out the assert.
In normal situations all keyframes are sorted. However, while keys are
transformed, they may change order and then this assertion no longer
holds. The effect is that the drawing isn't perfect during the
transform; the "constant value" bars aren't updated until the
transformation is confirmed. Apart from that, the code runs fine, so it
seems like a workable workaround.
|
|
|
|
It's not useful to wrap vertical motion when dragging markers.
It was too easy to accidentally wrap the cursor to the top of a region,
as markers need to be dragged from the bottom edge of the region.
|
|
|
|
"marker_selected" was the marker after the selected marker
and is used for cycling the selection.
|
