Age | Commit message (Collapse) | Author |
|
|
|
Also use doxygen comments for sculpt functions.
|
|
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
Use invert_m4_m4_safe_ortho when joining objects so zero scaled axis
doesn't cause all points to be scaled to zero.
Instead geometry is left un-scaled on degenerate axes.
Report a warning in this case since users may want to adjust the
active objects scale.
|
|
Mistake in b077de086e14. I did the same fix for a few operators there,
but missed the object "Join" one.
The joining operator changes the layer content. So it must send a
notifier for that.
Before b077de086e14 that didn't cause a noticeable issue, because the
Outliner happened to listen to other notifiers (active/selection
changes) the operator sent and fully rebuilt its tree in response. Now
missing these notifiers can be more problematic, since we try to avoid
more rebuilds.
Added comments to the notifier types to avoid at least this pitfall.
|
|
Allows to identify pose channels more reliably than by the pointer.
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/armature` module.
No functional changes.
|
|
|
|
|
|
|
|
|
|
From what I can see, there are two issues at play in {T76689} and its merged-in report {T76590}:
- In Blender ≤ 2.79 the bone layer dots were updated in the draw code. This ensured the info was up to date before drawing. This is no longer possible, as the drawing code uses evaluated objects, and those should not be written to. This has been addressed in rB709f126e8143 by calling the update function explicitly in various places in the code. The problem is that this wasn't added to all necessary spots.
- When in edit mode, changes are made to the edit bones but not to the 'actual' bones (this is synced when exiting edit mode). This causes undo to mess up the layer indicators.
I think both issues can be addressed by having the dependency graph update the used layer info as part of the armature evaluation. This will make the undo system work properly, and allows the removal of some `BKE_armature_refresh_layer_used()` from various places.
There is still the issue that there are two functions (`BKE_armature_refresh_layer_used()` and `ED_armature_edit_refresh_layer_used()`) that are both responsible for updating `bArmature::layer_used`. This is a trickier thing to solve, though, as the definition of the `EditBone` struct resides in the armature editor module. This means that blenkernel can't iterate over edit bones, but on the other hand the dependency graph shouldn't call any editor functions either. This is why I left the `ED_armature_edit_refresh_layer_used()` calls untouched.
The downside of recalculating `layer_used` from the dependency graph (at least in the way that I did it now) is that it is called every time a user moves a bone in pose mode. This frequency of updates is not necessary.
Differential Revision: https://developer.blender.org/D7709
|
|
|
|
This reverts commit 92d62148bed1cf68ed674b4a9c6ba6440a697ca8.
When merging in from blender-v2.83-release the merge was somehow rebased
after viewing the log.
|
|
Add missing outliner selection sync tagging for various non-outliner
operators.
* Curve separate
* Grease Pencil separate
* Mesh separate
* Make instances real
* 3D view paste
* Sequencer paste
* Armature delete, dissolve, separate, duplicate, subdivide, extrude,
click extrude, primitive add
* Pose Group select, delete
Resolves T71404
|
|
Add missing outliner selection sync tagging for various non-outliner
operators.
* Curve separate
* Grease Pencil separate
* Mesh separate
* Make instances real
* 3D view paste
* Sequencer paste
* Armature delete, dissolve, separate, duplicate, subdivide, extrude,
click extrude, primitive add
* Pose Group select, delete
Resolves T71404
|
|
All the driver-specific code in `fcurve.c` has been moved into a new file
`fcurve_driver.c`. The corresponding declarations have been moved from
`BKE_fcurve.h` to `BKE_fcurve_driver.h`.
All the `#include "BKE_fcurve.h"` statements have been investigated and
replaced with `BKE_fcurve_driver.h` where necessary.
No functional changes.
|
|
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
|
|
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
|
|
|
|
|
|
into account for duplicating actions
Previously actions remained linked after duplication, now this is based
on the User Preferences (PreferencesEdit.use_duplicate_action).
note: default is ON here, so this changes default behavior of separate
operators.
First intuition was to respect _all_ preferences here (e.g. also
duplicating materials if chosen in the User Preferences) but after
consideration this is probably not what the User would expect from such
'modeling' opertions (e.g. separate by loose parts resulting in possibly
many duplicate materials)
Fixes T71038
Maniphest Tasks: T71038
Differential Revision: https://developer.blender.org/D6120
|
|
Fix for fix (rB8bf7ca9fe31c).
The fix was not actually working [neither for multi-armature-editing as
intended nor for single armatures] and it broke single-armature bone
separation completely.
More or less indentation issue, move relevant code out of bone loop, do
after all bones have been checked, guess this was intended anyways.
Differential Revision: https://developer.blender.org/D6949
|
|
Previous code made it seem as if the original edit-object
was re-created after separating.
|
|
- Existing objects remain selected.
- The content of the armatures is unselected.
|
|
|
|
Armatures that didn't contain any selected bones were still
creating armatures.
|
|
This is the unification of all overlays into one overlay engine as described in T65347.
I went over all the code making it more future proof with less hacks and removing old / not relevent parts.
Goals / Acheivements:
- Remove internal shader usage (only drw shaders)
- Remove viewportSize and viewportSizeInv and put them in gloabl ubo
- Fixed some drawing issues: Missing probe option and Missing Alt+B clipping of some shader
- Remove old (legacy) shaders dependancy (not using view UBO).
- Less shader variation (less compilation time at first load and less patching needed for vulkan)
- removed some geom shaders when I could
- Remove static e_data (except shaders storage where it is OK)
- Clear the way to fix some anoying limitations (dithered transparency, background image compositing etc...)
- Wireframe drawing now uses the same batching capabilities as workbench & eevee (indirect drawing).
- Reduced complexity, removed ~3000 Lines of code in draw (also removed a lot of unused shader in GPU).
- Post AA to avoid complexity and cost of MSAA.
Remaining issues:
- ~~Armature edits, overlay toggles, (... others?) are not refreshing viewport after AA is complete~~
- FXAA is not the best for wires, maybe investigate SMAA
- Maybe do something more temporally stable for AA.
- ~~Paint overlays are not working with AA.~~
- ~~infront objects are difficult to select.~~
- ~~the infront wires sometimes goes through they solid counterpart (missing clear maybe?) (toggle overlays on-off when using infront+wireframe overlay in solid shading)~~
Note: I made some decision to change slightly the appearance of some objects to simplify their drawing. Namely the empty arrows end (which is now hollow/wire) and distance points of the cameras/spots being done by lines.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6296
|
|
|
|
`layer_used` runtime data, which controls the drawing of dots in the UI was not getting refreshed properly.
This used to happen in the drawing code, but was no longer working for reasons explained in:
{rB2b09062defa093a243b5fe64b099accb07b440a3}
The solution was to update each layer manually in the operators:
* ARMATURE_OT_bone_primitive_add
* ARMATURE_OT_delete
* ARMATURE_OT_dissolve
* ARMATURE_OT_fill
* ARMATURE_OT_merge
* ARMATURE_OT_separate
* ARMATURE_OT_bone_layers
* POSE_OT_bone_layers
Differential Revision: https://developer.blender.org/D5281
|
|
the dot icon in the layers UI"
This commit did not follow the protocol that requires a review first.
This reverts commit 580acab1737c726f43e39792dbb75f3ca2089fcb.
|
|
icon in the layers UI
|
|
Objects that had constraints or drivers referring to the
joined armatures weren't tagged, and thus evaluated copies
ended up with old bad pointers.
|
|
Multi-object selection allowed to parent edit-bones across armatures
(which isn't supported).
|
|
Prepare for enabling ReflowComments.
|
|
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
Convention was not to but after discussion on 918941483f7e we agree its
best to change the convention.
Names now mostly follow RNA.
Some exceptions:
- Use 'nodetrees' instead of 'nodegroups'
since the struct is called NodeTree.
- Use 'gpencils' instead of 'grease_pencil'
since 'gpencil' is a common abbreviation in the C code.
Other exceptions:
- Leave 'wm' as it's a list of one.
- Leave 'ipo' as is for versioning.
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
Needed for clan-format not to wrap onto one line.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
|
|
Prevents clang-format wrapping text before comments.
|
|
There were at least three copies of those:
- OB_RECALC* family of flags, which are rudiment of an old
dependency graph system.
- PSYS_RECALC* which were used by old dependency graph system
as a separate set since the graph itself did not handle
particle systems.
- DEG_TAG_* which was used to tag IDs.
Now there is a single set, which defines what can be tagged
and queried for an update. It also has some aggregate flags
to make queries simpler.
Lets once and for all solve the madness of those flags, stick
to a single set, which will not overlap with anything or require
any extra conversion.
Technically, shouldn't be measurable user difference, but some
of the agregate flags for few dependency graph components did
change.
Fixes T58632: Particle don't update rotation settings
|
|
|
|
|