Age | Commit message (Collapse) | Author |
|
Used for local structs/variables,
since `ofs` is by far the most widely used abbreviation.
|
|
|
|
|
|
In two cases the percentage property was actually used incorrectly, as
pointed out in T82070. The range was [0, 1], but the properties were still
displayed as percentages.
There is a preference to control whether to display factors or
percentages, so it usually doesn't make sense to manually define
properties as percentages.
Resolves T82070
Differential Revision: https://developer.blender.org/D9344
|
|
|
|
|
|
- BKE_bezt_subdivide_handles -> BKE_fcurve_bezt_subdivide_handles
- binarysearch_bezt_index -> BKE_fcurve_bezt_binarysearch_index
These functions are specific to F-Curves and don't make sense for other
uses of BezTriple (curve-object data for e.g.)
Also:
- Move detailed doxygen comment above code, following code-style.
- Mark bezt_add_to_cfra_elem unused.
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/armature` module.
No functional changes.
|
|
|
|
|
|
A follow up to T67212. I missed that the rotation interpolation had its
own code path.
The previous rotation push code was actually wrong (but smooth).
Now all of the actions behave correctly and is smoothly interpolated.
|
|
Follow up of b2ee1770d4c3 and 10c2254d412d, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
|
|
Both the MS headers and blender headers define the HKEY
which gives all kind of inclusion order issues.
This diff renames all *KEY constants to EVT_*KEY to resolve
this conflict.
Reviewed By: brecht , dfelinto
Differential Revision: http://developer.blender.org/D7164
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
|
|
to Breakdown"
The previous method produced non smooth interpolation results and it was
very hard to control. (At least for me it seemed to be broken until I
actually took a look at what the code actually did)
Now we simply linearly interpolate between the breakdown position and
the current bone data.
Reviewed By: Sybren, Hjalti
Differential Revision: http://developer.blender.org/D5892
|
|
There was a mix of old and new constants. Now have one list of WM_CURSOR_*
cursor types, using GHOST standard cursors when available and otherwise falling
back to our custom cursors.
Ref D5197
|
|
The old layout of `PointerRNA` was confusing for historic reasons:
```
typedef struct PointerRNA {
struct {
void *data;
} id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
This patch updates it to:
```
typedef struct PointerRNA {
struct ID *owner_id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
Throughout the code base `id.data` was replaced with `owner_id`.
Furthermore, many explicit pointer type casts were added which
were implicit before. Some type casts to `ID *` were removed.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D5558
|
|
T68035 by @luzpaz
|
|
This change ensures that operators which needs access to evaluated data
first makes sure there is a dependency graph.
Other accesses to the dependency graph made it more explicit about
whether they just need a valid dependency graph pointer or whether they
expect the graph to be already evaluated.
This replaces OPTYPE_USE_EVAL_DATA which is now removed.
Some general rules about usage of accessors:
- Drawing is expected to happen from a fully evaluated dependency graph.
There is now a function to access it, which will in the future control
that dependency graph is actually evaluated.
This check is not yet done because there are some things to be taken
care about first: for example, post-update hooks might leave scene in
a state where something is still tagged for update.
- All operators which needs to access evaluated state must use
CTX_data_ensure_evaluated_depsgraph().
This function replaces OPTYPE_USE_EVAL_DATA.
The call is generally to be done in the very beginning of the
operator, prior other logic (unless this is some comprehensive
operator which might or might not need access to an evaluated state).
This call is never to be used from a loop.
If some utility function requires evaluated state of dependency graph
the graph is to be passed as an explicit argument. This way it is
clear that no evaluation happens in a loop or something like this.
- All cases which needs to know dependency graph pointer, but which
doesn't want to actually evaluate it can use old-style function
CTX_data_depsgraph_pointer(), assuming that underlying code will
ensure dependency graph is evaluated prior to accessing it.
- The new functions are replacing OPTYPE_USE_EVAL_DATA, so now it is
explicit and local about where dependency graph is being ensured.
This commit also contains some fixes of wrong usage of evaluation
functions on original objects. Ideally should be split out, but in
reality with all the APIs being renamed is quite tricky.
Fixes T67454: Blender crash on rapid undo and select
Speculation here is that sometimes undo and selection operators are
sometimes handled in the same event loop iteration, which leaves
non-evaluated dependency graph.
Fixes T67973: Crash on Fix Deforms operator
Fixes T67902: Crash when undo a loop cut
Reviewers: brecht
Reviewed By: brecht
Subscribers: lichtwerk
Maniphest Tasks: T67454
Differential Revision: https://developer.blender.org/D5343
|
|
|
|
Cheap tip: anything that is not "Camel Case" and/or that is more than
a few words long should use `TIP_` translation, not `IFACE_` one.
Also added several missing strings (including the one reported in D5056
by Jean First (@robbott), thanks).
|
|
Perviously it was only possible to interpolate from the breakdown poses.
Now you can Push/Relax in regard to the rest pose as well.
For this only one keyframe is needed while the old modes needs two.
|
|
* Fix operator adjust settings not working.
* Fix modal operator not working when invoked from search menu.
* Fix tagging to be correct for new depsgraph.
* Fix pose relax doing nothing when start and end frames match
even if the current frame value is different.
* Remove odd 0.3..0.7 limit in adjust operator settings panel.
|
|
Prepare for enabling ReflowComments.
|
|
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
|
|
|
|
- Quaternions weren't normalized before interpolating
causing incorrect results & assert.
- Make the newly calculated quaternion compatible with the previous
to avoid axis-flipping & setting values with large changes compared
to existing key-frames.
|
|
|
|
Mostly functions wrapping args, not confirming to our style guide.
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
Needed for clan-format not to wrap onto one line.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Without this clang-format may wrap them onto a single line.
|
|
Prevents clang-format wrapping text before comments.
|
|
The cause is that FOREACH_OBJECT_IN_MODE_BEGIN assumed that the active
object is in the correct mode, which is wrong in this case. It also
only considered objects of the same type as active, which had to be
replaced with an explicit type parameter.
|
|
Bring back per-viewport localview. This is based on Blender 2.79.
We have a limit of 16 different local view viewports.
We are using both the numpad /, as well as the regular /.
Missing features:
* Hack to make sure lights are always visible.
* Make rendered mode with external engines to support this as well
(probably just need to support this in the RNA iterators).
* Support over 16 viewports by taking existing viewports out of local view.
The code can use a cleanup pass in the future to unify the test to see
if an object is visible (or we can use TESTBASE in more places).
|
|
|
|
|
|
With the new automatic handle algorithm, it is possible to do a lot
of the animation via keyframes without touching the curves. It is
however necessary to change the keyframe interpolation and handle
types in certain cases. Currently the dopesheet/action editor
allows changing the types, but does not show them in any way.
To fix, add a new menu option to display this information. For handle
type, it is represented using the shape of the key icons: diamond for
Free, clipped diamond for Aligned, square for Vector, circle for Auto
Clamp, and cirle with dot for Automatic.
Non-bezier interpolation is a property of intervals between keys,
so it is marked by drawing lines, similar to holds. In this initial
version, only the fact of non-bezier interpolation is displayed,
without distinguishing types. For summaries, the line is drawn at
half alpha if not all curves in the group are non-bezier.
In addition, it is sometimes helpful to know the general direction
of change of the curve, and which keys are extremes. This commit
also adds an option to highlight extremes, based on comparing the
keyed values with adjacent keys. Half-intensity display is used
for overshot bezier extremes, or non-uniform summaries.
Reviewers: brecht, aligorith, billreynish
Differential Revision: https://developer.blender.org/D3788
|