| Age | Commit message (Collapse) | Author |
|---|
|
Replace iroundf with round_fl_to_int, add other types
|
|
|
|
|
|
In some cases users may want to disable this option
to avoid changing other properties besides vertex locations.
|
|
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
|
|
* Display a warning above the pose list if the pose library is in an invalid
state (i.e. when it has keyframes but no pose-markers associated with those
keyframes). This warning prompts users to run the "Sanitize Pose Library Action"
operator, which should fix up such issues.
* "Sanitize" operator now creates unique names for each newly create pose
marker it generates, including the frame on which it found the pose
|
|
Also remove duplicate & mismatching comments from grease-pencil header.
Keep comments close to implementation to avoid getting out of sync.
|
|
|
|
This commit adds new features to the breakdowner, giving animators more
control over what gets interpolated by the breakdowner. Specifically:
"Just as G R S let you move rotate scale, and then X Y Z let you do that
in one desired axis, when using the Breakdower it would be great to be
able to add GRS and XYZ to constrain what transform / axis is being
breakdowned."
As requested here:
https://rightclickselect.com/p/animation/csbbbc/breakdowner-constrain-transform-and-axis
Notes:
* In addition to G/R/S, there's also B (Bendy Bone settings and C (custom properties)
* Pressing G/R/S/B/C or X/Y/Z again will turn these constraints off again
|
|
Avoids including GPU_select and makes it more clear that the cache is
needed for view3d_opengl_select calls.
Also use typed enum for select mode.
|
|
|
|
Intended to replace legacy GL_SELECT, without the limitations of
sample queries which can't access depth information.
This commit adds VIEW3D_SELECT_PICK_NEAREST and VIEW3D_SELECT_PICK_ALL
which access the depth buffers to detect whats under the pointer,
so initial selection is always the closest item.
The performance of this method depends a lot on the OpenGL
implementations glReadPixels.
Since reading depth can be slow, buffers are cached for object picking
so selecting re-uses depth data, performing 1 draw instead of 3
(for 24, 18, 10 px regions, picking with many items under the pointer).
Occlusion queries draw twice when picking nearest,
so worst case 6x draw calls per selection.
Even with these improvements occlusion queries is faster on AMD hardware.
Depth selection is disabled by default, toggle option under select method.
May enable by default if this works well on different hardware.
Reviewed as D2543
|
|
|
|
Initialize a rectangle from point+size.
|
|
|
|
|
|
Since the cache is created in one way or another, this flag is not really making a difference
More details here: D2496
|
|
Functions like that do not have anything to do in BKE really, even less
when actually more used for bones than vgroups!
|
|
Those were forcing to use vgroup name define in bones area, or even
mixing with maxbonename... ugly, and totally avoidable.
|
|
Things like `BLI_uniquename` had nothing, but really nothing to do in
BLI_path_util files!
Also, got rid of length limitation in `BLI_uniquename_cb`, we can use
alloca here to avoid overhead of malloc while keeping free size (within
reasonable limits of course).
|
|
Just store bones that could not get renamed to desired flipped name on the
first try into a temp list, and try to rename them a second time.
This is rather simple solution, will induce 'over numbering' in case you
flip a bone to another unselected bone's name (since number will be
incremented in both rename attempts), but think this is acceptable minor
glitch, for a corner case situation that does not have any good
resolution anyway.
Also, set `strip_numbers` option of `BKE_deform_flip_side_name` to
false, otherwise chains of bones with same names would get their numbers
completely messed up after name flipping.
Based on work by @dfelinto in D2456 (https://developer.blender.org/D2456), thanks.
|
|
|
|
Linked data should not be modified in such a way.
Reported by Nathan here in the studio, reviewed by Bastien, thanks!
|
|
It was annoying to only have regular Enter confirming input there.
|
|
For the new dependency graph we have to rebuild graph when
bones "topology" are changing.
|
|
Previously the pose library used the WholeCharacter key set, which ignores
selection and add keys for almost all bones in the rig. This is a very
slow operation on complex rigs. With this patch, only selected bones are
keyed, defaulting to keying all bones when none are selected.
Note that this fixes the FIXME previously mentioned in the source.
|
|
Quick fix for now, need to unlock studio here as well.
Proper fix would be to modify API a bit and pass flags which will
prevent expand called on bmain perhaps. But this we should discuss
a bit,
|
|
Was using wrong argument name in doxygen comment. Also reduced scope of vars.
Sorry for the noise :/
|
|
We were calling BLI_remlink and then BLI_insertlinkbefore/after quite often. BLI_listbase_link_move simplifies code a bit and makes it easier to follow. It also returns if link position has changed which can be used to avoid unnecessary updates.
Added it to a number of list reorder operators for now and made use of return value. Behavior shouldn't be changed.
Also some minor cleanup.
|
|
A no-op happens when trying to move the top pose further up, or the
bottom pose further down.
|
|
These may be exposed in UI (keymap editor & redo panel), so better avoid using identifiers like "UP" "DOWN". They are redundant anyway (already displayed).
|
|
This will break the pose library preview add-on, since that add-on uses
file indices rather than pose names.
|
|
Uses similar way of storing temp data as object copy paste, just
uses different read entrypoint which does not modify current bmain.
This gives ability to easily copy-paste poses from one blender to
another one.
Hopefully doesn't introduce user-measurable differences.
Request from Peer here in the studio.
Reviewers: mont29
Reviewed By: mont29
Subscribers: hjalti, fsiddi
Differential Revision: https://developer.blender.org/D2229
|
|
|
|
The code was expecting vector to be normalized, however after
applying inverted object matrix it was possible to have scale
applied to it.
|
|
Current code changes the selection then then runs ED_armature_sync_selection
to copy to the bones rootsel flag from the parents tipsel.
Use this logic for entering edit-mode too.
|
|
Idea is to replace hard-to-track (id->lib != NULL) 'is linked datablock' check everywhere in Blender
by a macro doing the same thing. This will allow to easily spot those checks in future, and more importantly,
to easily change it (see work done in asset-engine branch).
Note: did not touch to readfile.c, since there most of the time 'id->lib' check actually concerns the pointer,
and not a check whether ID is linked or not. Will have a closer look at it later.
Reviewers: campbellbarton, brecht, sergey
Differential Revision: https://developer.blender.org/D2082
|
|
- the name of the enumerator `SNAP_NOT_OBEDIT` was changed to `SNAP_NOT_ACTIVE`.
- the parameter `snap_to_flag` was moved to outside `SnapObjectParams`.
- the member `use_object_edit` was renamed to `use_object_edit_cage`.
- added the arg `params` in `ED_transform_snap_object_project_ray`.
- simplifications in the loop of the function `snapObjectsRay`.
|
|
|
|
|
|
bone deleted
In addition to the original bug report, I've gone through cleaning up a range of
related bugs which only became clear when hunting around the code...
* Custom Handle References weren't getting cleared when the bones they used got
deleted. But, neither was the custom bone shape location/transform reference.
* Various places where posebone settings are copied around were also missing code
to handle the new Bendy Bone properties.
(WHY DO WE HAVE SO MANY VARIATIONS OF COPYING POSE DATA!?!?)
* If duplicating a Bendy Bone with custom references, and the custom references
are also selected/duplicated, the new Bendy Bones will use the corresponding
duplicated bones
|
|
This commit/patch/branch brings a bunch of powerful new options for B-Bones and
for working with B-Bones, making it easier for animators to create their own
rigs, using fewer bones (which also means hopefully lighter + faster rigs ;)
This functionality was first demoed by Daniel at BConf15
Some highlights from this patch include:
* You can now directly control the shape of B-Bones using a series of properties
instead of being restricted to trying to indirectly control them through the
neighbouring bones. See the "Bendy Bones" panel...
* B-Bones can be shaped in EditMode to define a "curved rest pose" for the bone.
This is useful for things like eyebrows and mouths/eyelids
* You can now make B-Bones use custom bones as their reference bone handles,
instead of only using the parent/child bones. To do so, enable the
"Use Custom Reference Handles" toggle. If none are specified, then the BBone will
only use the Bendy Bone properties.
* Constraints Head/Tail option can now slide along the B-Bone shape, instead of
just linearly interpolating between the endpoints of the bone.
For more details, see:
* http://aligorith.blogspot.co.nz/2016/05/bendy-bones-dev-update.html
* http://aligorith.blogspot.co.nz/2016/05/an-in-depth-look-at-how-b-bones-work.html
-- Credits --
Original Idea: Daniel M Lara (pepeland)
Original Patch/Research: Jose Molina
Additional Development + Polish: Joshua Leung (aligorith)
Testing/Feedback: Daniel M Lara (pepeland), Juan Pablo Bouza (jpbouza)
|
|
In case not all bones are selected, not all possible mirrors are set in editbone->temp.ebone,
so we need to search them...
|
|
Some languages like Chinese or Japanese take three or four bytes per char...
Also fixed some missing translation markers for UI header messages.
|
|
|
|
Take advantage of the efficiency provided by the snap_context.
Also fixes errors:
- volume snap fails based on view angle (T48394).
- multiple instances of dupli-objects break volume calculation.
|
|
Use scene snap mode.
Also allow passing NULL ray-depth which falls back to BVH_RAYCAST_DIST_MAX.
|
|
Values set but not used
|
|
Separate the creation of trees from EditMesh from the creation of trees from DerivedMesh.
This was meant to simplify the API, but didn't work out so well.
`bvhtree_from_mesh_*` actually is working as `bvhtree_from_derivedmesh_*`.
This is inconsistent with the trees created from EditMesh. Since for create them does not use the DerivedMesh.
In such cases the dm is being used only to cache the tree in the struct DerivedMesh. What is immediately released once
bvhtree is being used in functions that change(tag) the DM cleaning the cache.
- Use a filter function so users of SnapObjectContext can define how edit-mesh elements are handled.
- Remove em_evil.
- bvhtree of EditMesh is now really cached in the snap functions.
- Code becomes organized and easier to maintain.
This is an important patch for future improvements in snapping functions.
|
|
This introduces a snap-context that can be re-used for casting rays into the scene
(by operators such as walk-mode, ruler and transform code).
This can be used to cache data between calls too.
|
