Age | Commit message (Collapse) | Author |
|
Add blank lines after file references to avoid them being interpreted as
doc-strings the following declarations.
|
|
Remove the extended version of ED_curve_editnurb_select_pick,
pass the size threshold directly to this function but as the distance in
pixels instead of a multiplier for ED_view3d_select_dist_px.
Using a multiplier is a less direct way to reference the threshold.
|
|
|
|
This tool can be used to rapidly edit curves. The current set of
functionalities for Bezier splines are as follows:
The functionalities are divided into three versions of the operator:
* Left-Click
* Ctrl + Left-Click
* Double Click
All current functionalities and their defaults are as follows:
* Extrude Point: Add a point connected to an existing point.
Enabled for Left-Click.
* Extrude Handle Type: Type of the handles of the extruded points.
Can be either Vector or Auto. Defaults to Vector.
* Delete Point: Delete existing point.
Enabled for Ctrl + Left-Click.
* Insert Point: Insert a point into a curve segment.
Enabled for Ctrl + Left-Click.
* Move Segment: Move curve segment.
Enabled for Left-Click.
* Select Point: Select a single point or handle at a time.
Enabled for Left-Click.
* Move point: Move existing points or handles.
Enabled for Left-Click.
* Close Spline: Close spline by clicking the endpoints consecutively.
Defaults to True.
* Close Spline Method: The condition for Close Spline to activate.
Can be one of None, On Press or On Click.
Defaults to On Click for Left-Click and None for the others.
* None: Functionality is turned off.
* On Press: Activate on mouse down.
This makes it possible to move the handles by dragging immediately
after closing the spline.
* On Click: Activate on mouse release.
This makes it possible to avoid triggering the Close Spline
functionality by dragging afterward.
* Toggle Vector: Toggle handle between Vector and Auto handle types.
Enabled for Double Click on a handle.
* Cycle Handle Type: Cycle between all four handle types.
Enabled for Double Click on the middle point of a Bezier point.
The keybindings for the following functionalities can be adjusted from
the modal keymap
* Free-Align Toggle: Toggle between Free and Align handle types.
Defaults to Left Shift. Activated on hold.
* Move Adjacent Handle: Move the closer handle of the adjacent vertex.
Defaults to Left Ctrl. Activated on hold.
* Move Entire: Move the entire point by moving by grabbing on the handle
Defaults to Spacebar. Activated on hold.
* Link Handles: Mirror the movement of one handle onto the other.
Defaults to Right Ctrl. Activated on press.
* Lock Handle Angle: Move the handle along its current angle.
Defaults to Left Alt. Activated on hold.
All the above functionalities, except for Move Segment and
those that work with handles, work similarly in the case of Poly
and NURBS splines.
Reviewed By: HooglyBoogly, weasel, campbellbarton
Differential Revision: http://developer.blender.org/D12155
|
|
Use <pre>..</pre> for pseudo-code.
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
MSVC used to warn about const mismatch for arguments passed by value.
Remove these as newer versions of MSVC no longer show this warning.
|
|
Ref T92709
|
|
This fixes T86440
As the CU_2D flag is set for nurbs, a Curve can have 2D nurbs mixed with 3D.
But the UI does not allow this mixing. It updates all nurbs to 2D or 3D when set.
So remove this specific flag for nurbs.
This may break old files, since 2D curves with mixed 3D are now set as 3D.
Differential Revision: https://developer.blender.org/D10738
|
|
Previously, it was kind of a mess. In different places it was using `char`, `short` and `int`.
The changed properties are flags that are operated upon using bit operations. Therefore, the integer type should be unsigned. Since we only use 2 bits of these flags, `uint8_t` is large enough.
Especially note the change I had to make in `RNA_define.h` to make this work.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8844
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Done using:
source/tools/utils_maintenance/c_sort_blocks.py
|
|
|
|
I'm following mesh editing to decide when to switch active object, or
deselect the other objects. I hope we can keep this all consistent in
the end.
|
|
|
|
Strip unindented comment blocks - mainly headers to avoid conflicts.
|
|
|
|
Access from the curve clean-up menu
|
|
Matches text-editor, console & text-button.
|
|
removes vertices, re-fitting the surrounding handles.
|
|
- Access with Shift-LMB or from the 'Create' toolbar tab.
- Uses curve fitting for bezier curves, with error and corner angle options.
- Optional tablet pressure to curve radius mapping.
- Depth can use the cursor or optionally draw onto the surface,
for the entire stroke or using the stroke start.
- Stroke plane can optionally be perpendicular to, or aligned to the surface normal.
- Optional radius tapering and for start/end points.
- Supports operator redo and calling from Python.
|
|
When pasting text, the style (bold, material, ...) is maintained, if it was originally copied from Blender.
This fixes the issue of missing copy/paste options for font objects
(they were present back in Blender 2.49)
Reviewers: Severin, campbellbarton, brecht
|
|
Part of patch D1670 by @LazyDodo
|
|
D1391 by @pink.vertex with own fixes/edits
|
|
D1381 by @johnroper100 with edits
|
|
|
|
its a very specific function, and not hard to paste body text from elsewhere.
We can make an addon if its important to some users.
|
|
- Add paste from system clipboard which behaves like paste from file.
- Paste from file now replaces the selection rather then just adding to the end.
- Move paste operations into the 'Edit' menu.
- Added generic paste functions: font_paste_wchar, font_paste_utf8.
- Fix paste max length check not taking the selection length into account.
|
|
also add Edit menu for 3d text and move cut/copy/paste there.
|
|
T37799 Patch from Simon Repp
with added option to recalculate handle lengths.
|
|
There were several issues with how bounding box and texture space
are calculated:
- This was done at the same time as applying modifiers, meaning if
several objects are sharing the same curve datablock, bounding
box and texture space will be calculated multiple times.
Further, allocating bounding box wasn't safe for threading.
- Bounding box and texture space were evaluated after pre-tessellation
modifiers are applied. This means Curve-level data is actually
depends on object data, and it's really bad because different
objects could have different modifiers and this leads to
conflicts (curve's data depends on object evaluation order)
and doesn't behave in a predictable way.
This commit moves bounding box and texture space evaluation from
modifier stack to own utility functions, just like it's was done
for meshes.
This makes curve objects update thread-safe, but gives some
limitations as well. Namely, with such approach it's not so
clear how to preserve the same behavior of texture space:
before this change texture space and bounding box would match
beveled curve as accurate as possible.
Old behavior was nice for quick texturing -- in most cases you
didn't need to modify texture space at all. But texture space
was depending on render/preview settings which could easily lead
to situations, when final result would be far different from
preview one.
Now we're using CV points coordinates and their radius to approximate
the bounding box. This doesn't give the same exact texture space,
but it helps a lot keeping texture space in a nice predictable way.
We could make approximation smarter in the future, but fir now
added operator to match texture space to fully tessellated curve
called "Match Texture Space".
Review link:
https://codereview.appspot.com/15410043/
Brief description:
http://wiki.blender.org/index.php/User:Nazg-gul/GSoC-2013/Results#Curve_Texture_Space
|
|
|
|
by Kevin Mackay (yakca)
The operator follows roughly the same behaviour as the split operator for a mesh (Ykey).
|
|
|
|
added some missing functions too - which are not used yep but should be there for api completeness.
* CDDM_set_mloop
* CDDM_set_mpoly
* BLI_mempool_count
|
|
without the underscores these clogged up the namespace for autocompleation which was annoying.
|
|
invert option.
|
|
|
|
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
|
|
|
|
|
|
With some own changes:
- Select pick moved to invoke()
- Used editsurfcurve_region_view3d as poll function for this operator
due to ogl dependency
Thanks to Elia Sarti (vekoon)!
|
|
http://www.vrchannel.de/blender/cylinder_rename.png
Mesh Tube > Mesh Cylinder
NURBS Tube > NURBS Cylinder
Metaball Cylinder > Metaball Capsule
I know that naming is something not everyone agrees on, but these terms look geometrically correct.
|