| Age | Commit message (Collapse) | Author |
|---|
|
When a change happens which invalidates view layers the syncing will be postponed until the first usage.
This will improve importing or adding many objects in a single operation/script.
`BKE_view_layer_need_resync_tag` is used to tag the view layer to be out of sync. Before accessing
`BKE_view_layer_active_base_get`, `BKE_view_layer_active_object_get`, `BKE_view_layer_active_collection`
or `BKE_view_layer_object_bases` the caller should call `BKE_view_layer_synced_ensure`.
Having two functions ensures that partial syncing could be added as smaller patches in the future. Tagging a
view layer out of sync could be replaced with a partial sync. Eventually the number of full resyncs could be
reduced. After all tagging has been replaced with partial syncs the ensure_sync could be phased out.
This patch has been added to discuss the details and consequences of the current approach. For clarity
the call to BKE_view_layer_ensure_sync is placed close to the getters.
In the future this could be placed in more strategical places to reduce the number of calls or improve
performance. Finding those strategical places isn't that clear. When multiple operations are grouped
in a single script you might want to always check for resync.
Some areas found that can be improved. This list isn't complete.
These areas aren't addressed by this patch as these changes would be hard to detect to the reviewer.
The idea is to add changes to these areas as a separate patch. It might be that the initial commit would reduce
performance compared to master, but will be fixed by the additional patches.
**Object duplication**
During object duplication the syncing is temporarily disabled. With this patch this isn't useful as when disabled
the view_layer is accessed to locate bases. This can be improved by first locating the source bases, then duplicate
and sync and locate the new bases. Will be solved in a separate patch for clarity reasons ({D15886}).
**Object add**
`BKE_object_add` not only adds a new object, but also selects and activates the new base. This requires the
view_layer to be resynced. Some callers reverse the selection and activation (See `get_new_constraint_target`).
We should make the selection and activation optional. This would make it possible to add multiple objects
without having to resync per object.
**Postpone Activate Base**
Setting the basact is done in many locations. They follow a rule as after an action find the base and set
the basact. Finding the base could require a resync. The idea is to store in the view_layer the object which
base will be set in the basact during the next sync, reducing the times resyncing needs to happen.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15885
|
|
This patch is a cleanup required before refactoring the view layer syncing
process {T73411}.
* Remove FIRSTBASE.
* Remove LASTBASE.
* Remove BASACT.
* Remove OBEDIT_FROM_WORKSPACE.
* Replace OBACT with BKE_view_layer_active_object.
* Replace OBEDIT_FROM_VIEW_LAYER with BKE_view_layer_edit_object.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15799
|
|
|
|
This patch enables all 8 combinations of Nurbs modes: Cyclic,
Bezier and Endpoint. Also removes restriction on Bezier Nurbs order.
The most significant changes are mode combinations bringing new
meaning. In D13891 is a scheme showing NURBS with same control
points in a modes, and also further description of each possible case.
Differential Revision: https://developer.blender.org/D13891
|
|
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
This commit improves NURBS knot generation by adding proper support
for the combination of the Bezier and cyclic options. In other cases
the resulting knot doesn't change. This cyclic Bezier knot is used to
create accurate accurate "Nurbs Circle", "Nurbs Cylinder" primitives.
"Nurbs Sphere" and "Nurbs Torus" primitives are also improved by
tweaking the spin operator.
The knot vector in 3rd order NURBS curve with Bezier option turned on
(without cyclic) is changed in comparison to previous calculations,
although it doesn't change the curve shape itself.
The accuracy of the of NURBS circle is fixed, which can be checked by
comparing with mesh circle. Tessellation spacing differences in
circular NURBS is also fixed, which is observable with the NURBS
cylinder and sphere primitives. These were causing seam-like effects.
This commit contains comments from Piotr Makal (@pmakal).
Differential Revision: https://developer.blender.org/D11664
|
|
|
|
Creating some primitives allows for a scale value (via python) that will
scale the object accordingly. For objects with a radius parameter
(like cylinders, spheres, etc.) passing a scale different to (1,1,1)
would result in unexpected behavior.
For example:
`>>> bpy.ops.mesh.primitive_uv_sphere_add(radius=2, scale=(1,1,2))`
We would expect this to create a sphere with a radius of 2
(dimensions 4,4,4) and then be scaled *2 along the z-axis
(dimensions 4,4,8). But this would previously create a scaled sphere
with dimensions (2,2,4).
The scale was simply divided by two. Maybe because the "radius"
parameter for creating the primitives was confusingly named "diameter"
(but used as the radius).
The fix adds a scale parameter to `ED_object_new_primitive_matrix`
and also renames the wrongly named "diameter" parameters to "radius".
Reviewed By: campbellbarton
Maniphest Tasks: T84638
Ref D10093
|
|
With this commit, curve objects support the geometry nodes modifier.
Curves objects now evaluate to `CurveEval` unless there was a previous
implicit conversion (tessellating modifiers, mesh modifiers, or the
settings in the curve "Geometry" panel). In the new code, curves are
only considered to be the wire edges-- any generated surface is a mesh
instead, stored in the evaluated geometry set.
The consolidation of concepts mentioned above allows remove a lot of
code that had to do with maintaining the `DispList` type temporarily
for modifiers and rendering. Instead, render engines see a separate
object for the mesh from the mesh geometry component, and when the
curve object evaluates to a curve, the `CurveEval` is always used for
drawing wire edges.
However, currently the `DispList` type is still maintained and used as
an intermediate step in implicit mesh conversion. In the future, more
uses of it could be changed to use `CurveEval` and `Mesh` instead.
This is mostly not changed behavior, it is just a formalization of
existing logic after recent fixes for 2.8 versions last year and two
years ago. Also, in the future more functionality can be converted
to nodes, removing cases of implicit conversions. For more discussion
on that topic, see T89676.
The `use_fill_deform` option is removed. It has not worked properly
since 2.62, and the choice for filling a curve before or after
deformation will work much better and be clearer with a node system.
Applying the geometry nodes modifier to generate a curve is not
implemented with this commit, so applying the modifier won't work
at all. This is a separate technical challenge, and should be solved
in a separate step.
Differential Revision: https://developer.blender.org/D11597
|
|
|
|
This shows the text as part of the assertion message.
|
|
This fixes T86440
As the CU_2D flag is set for nurbs, a Curve can have 2D nurbs mixed with 3D.
But the UI does not allow this mixing. It updates all nurbs to 2D or 3D when set.
So remove this specific flag for nurbs.
This may break old files, since 2D curves with mixed 3D are now set as 3D.
Differential Revision: https://developer.blender.org/D10738
|
|
|
|
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
Running add-objects operator without an active screen would crash
as CTX_data_edit_object would return NULL in this case.
This could happen when adding objects from frame-change handlers for e.g.
In the case of adding new objects there is no need for a context lookup,
pass this directly to ED_object_editmode_exit_ex.
|
|
Also order sizeof(..) first to promote other values to size_t.
|
|
|
|
Needed for to create objects of a specific size.
|
|
When editing a complex curve is very annoying to have all handles at a time. Also, this is a requirement for the current GSoC Edit Grease Pencil using curves.
I have seen that this improvement can be used in any other area of blender, so I have decided to publish the option in the overlay panel..
Reviewed By: fclem, #user_interface, billreynish, Severin
Differential Revision: https://developer.blender.org/D7754
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
Needed for clan-format not to wrap onto one line.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Prevents clang-format wrapping text before comments.
|
|
There were at least three copies of those:
- OB_RECALC* family of flags, which are rudiment of an old
dependency graph system.
- PSYS_RECALC* which were used by old dependency graph system
as a separate set since the graph itself did not handle
particle systems.
- DEG_TAG_* which was used to tag IDs.
Now there is a single set, which defines what can be tagged
and queried for an update. It also has some aggregate flags
to make queries simpler.
Lets once and for all solve the madness of those flags, stick
to a single set, which will not overlap with anything or require
any extra conversion.
Technically, shouldn't be measurable user difference, but some
of the agregate flags for few dependency graph components did
change.
Fixes T58632: Particle don't update rotation settings
|
|
|
|
D3943 by @Zachman w/ edits
|
|
|
|
|
|
Makes it simpler to make some changes...
Also fix order of some includes (use alphabetical please).
|
|
|
|
|
|
|
|
Regression in recent undo system changes,
This caused T55048.
When each mode had its own undo stack it was important
to initialize it when entering edit-mode.
|
|
|
|
Split out undo API from ED_util.h into ED_undo.h
|
|
BKE_depsgraph.h
This removes BKE_depsgraph.h and depsgraph.c
|
|
|
|
- use ED_ prefix for api calls
- use ED_*_select_pick for mouse selection (was already done in parts)
|
|
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
|
|
Was adding then renaming, unnecessarily.
|
|
|
|
|
|
Scaling matrix assumed no rotation,
also remove unused apply_diameter arg.
|
