Age | Commit message (Collapse) | Author |
|
color attribute system.
This commit removes sculpt colors from experimental
status and unifies it with vertex colors. It
introduces the concept of "color attributes", which
are any attributes that represents colors. Color
attributes can be represented with byte or floating-point
numbers and can be stored in either vertices or
face corners.
Color attributes share a common namespace
(so you can no longer have a floating-point
sculpt color attribute and a byte vertex color
attribute with the same name).
Note: this commit does not include vertex paint mode,
which is a separate patch, see:
https://developer.blender.org/D14179
Differential Revision: https://developer.blender.org/D12587
Ref D12587
|
|
This adds a new Grow/Shrink brush which is similar to the Length
brush in the old hair system.
* It's possible to switch between growing and shrinking by hold
down ctrl and/or by changing the direction enum.
* 3d brush is supported.
* Different brush falloffs are supported.
* Supports scaling curves uniformly or shrinking/extrapolating
them. Extrapolation is linear only in this patch.
* A minimum length settings helps to avoid creating zero-sized curves.
Differential Revision: https://developer.blender.org/D14474
|
|
This tool can be used to rapidly edit curves. The current set of
functionalities for Bezier splines are as follows:
The functionalities are divided into three versions of the operator:
* Left-Click
* Ctrl + Left-Click
* Double Click
All current functionalities and their defaults are as follows:
* Extrude Point: Add a point connected to an existing point.
Enabled for Left-Click.
* Extrude Handle Type: Type of the handles of the extruded points.
Can be either Vector or Auto. Defaults to Vector.
* Delete Point: Delete existing point.
Enabled for Ctrl + Left-Click.
* Insert Point: Insert a point into a curve segment.
Enabled for Ctrl + Left-Click.
* Move Segment: Move curve segment.
Enabled for Left-Click.
* Select Point: Select a single point or handle at a time.
Enabled for Left-Click.
* Move point: Move existing points or handles.
Enabled for Left-Click.
* Close Spline: Close spline by clicking the endpoints consecutively.
Defaults to True.
* Close Spline Method: The condition for Close Spline to activate.
Can be one of None, On Press or On Click.
Defaults to On Click for Left-Click and None for the others.
* None: Functionality is turned off.
* On Press: Activate on mouse down.
This makes it possible to move the handles by dragging immediately
after closing the spline.
* On Click: Activate on mouse release.
This makes it possible to avoid triggering the Close Spline
functionality by dragging afterward.
* Toggle Vector: Toggle handle between Vector and Auto handle types.
Enabled for Double Click on a handle.
* Cycle Handle Type: Cycle between all four handle types.
Enabled for Double Click on the middle point of a Bezier point.
The keybindings for the following functionalities can be adjusted from
the modal keymap
* Free-Align Toggle: Toggle between Free and Align handle types.
Defaults to Left Shift. Activated on hold.
* Move Adjacent Handle: Move the closer handle of the adjacent vertex.
Defaults to Left Ctrl. Activated on hold.
* Move Entire: Move the entire point by moving by grabbing on the handle
Defaults to Spacebar. Activated on hold.
* Link Handles: Mirror the movement of one handle onto the other.
Defaults to Right Ctrl. Activated on press.
* Lock Handle Angle: Move the handle along its current angle.
Defaults to Left Alt. Activated on hold.
All the above functionalities, except for Move Segment and
those that work with handles, work similarly in the case of Poly
and NURBS splines.
Reviewed By: HooglyBoogly, weasel, campbellbarton
Differential Revision: http://developer.blender.org/D12155
|
|
The indirect library data icon was just a grayed out version of the
regular one. This graying out is now done in code, so the icon can be
removed from the SVG. Note that the icon is still defined as
`ICON_LIBRARY_DATA_INDIRECT` (or `LIBRARY_DATA_INDIRECT` in BPY).
|
|
From hair particle mode:
* Add
* Comb
* Cut
* Grow
New:
* Delete
Only comb and delete are used at the moment (by the new tools which are
under experimental).
|
|
ddf189892c596d939 missed recreating the icons with the new names.
This commit runs `make icons` and replaces the names in CMake.
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
This reverts commit ae349eb2d50524b030f702b8ed3fd75531d4db7e.
|
|
This brush fixes the random spikes that
occasionally happen in multires models.
These spikes can be nearly impossible to
fix manually and can make working with
multires a nightmare.
|
|
The Blender icon must not be used to refer to anything that is not
Blender itself. Using the Blender icon on its own to refer to .blend
files or the currently open file is a no-go, which was brought up by
Ton.
This does the following changes to the icon file:
* Add new "Current File" icon
* Change the .blend file icon to contain a file icon with the Blender
logo, but not merely the Blender logo.
* Change the backup .blend file icon accordingly.
The new "Current File" icon is used in the Asset Browser, but
could/should be used in the Outliner as well. That needs more design
discussion though.
|
|
Create dot-dash effect for grease pencil strokes. User can manually edit the length, gap and styles for each segment of dashed lines.
The values in each segment can all be key-framed to make animations.
Reviewed By: Hans Goudey (HooglyBoogly), Antonio Vazquez (antoniov)
Differential Revision: http://developer.blender.org/D11876
|
|
Designed by @mendio
The new icons are:
* Dot-Dash modifier
* Length Modifier
* Line Art modifier
|
|
These icons are used to define the type of caps.
Designed by: Matias Mendiola
Reviewed by: Pablo Vazquez
|
|
Patch for: T37878
{F10169694}
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D11487
|
|
The editor is being worked on by the geometry nodes team.
Icon created by Andrzej Ambroz (jendrzych).
Addresses https://developer.blender.org/T85925.
|
|
Sync the list of icons in CMakeLists.txt with UI_icons.h.
Restore, in the source file, the FUND icon that was accidentally
deleted.
Delete four old/unused icons.
See also D9715.
|
|
This commit adds the icon for the new tool.
|
|
New layout for the 'About' dialog featuring the full version of the Blender logo.
Differential Revision: https://developer.blender.org/D9507
Reviewed by Hans Goudey
|
|
This patch adds icons for the multires displacement
eraser tool in sculpt mode
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D9286
|
|
This patch adds icons for line gesture tools
Line mask and line project
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D9285
|
|
This patch adds icon for the boundary brush in sculpt mode
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D9284
|
|
This patch adds missing icons for the new trim tools in sculpt mode.
Although these tools recently got "add geometry" modes, it's more
essential to highlight the most important feature of the tool,
trimming, than to try to portray everything they can do.
Differential Revision: https://developer.blender.org/D8963
|
|
This patch adds missing icons for the new sculpt face set tools, and
updates the mask icons to be more consistent with the changes.
Currently draw face sets and draw mask icons are inconsistent and don't
relate to drawing/painting masks or face sets. This commit makes the
icons consistent and reusable for future tools like sculpt vertex
colors.
Differential Revision: https://developer.blender.org/D8875
|
|
This icon mimics the details of the cloth brush icon while using the
frame style extablished for the other "filter" tools.
Differential Revision: https://developer.blender.org/D8467
|
|
Differential Revision: https://developer.blender.org/D8016
|
|
Better to use more general term since in theory these forces can be used for smoke and liquid.
|
|
After the previous commit by Harley Acheson, scaling can be handled at
runtime so we don't need to have two splash screen image variants
anymore.
Also removes the `splash_scale.sh` script used to create the down-scaled
variant.
Always nice to get rid of some binary files from the repository :)
|
|
There is no need to have another font embedded in the Blender executable, we
can assume the bundled font exists. In the future we may provide a fallback
if the font specified by the user in the preferences is missing a character,
but that can use our bundled international font.
Differential Revision: https://developer.blender.org/D6854
|
|
Adding a set of larger icons for use in informational dialogs.
Differential Revision: https://developer.blender.org/D6859
Reviewed by Campbell Barton
|
|
|
|
- Add icons for Sculpt Cloth, Clay Thumb and Draw Face Sets, as well as GP Tint, Replace and Transform Fill tools
- Tweak icons for Sculpt Rotate, Pinch, Multiplane Scrape, Inflate, Blob, Draw Sharp, based on feedback on Devtalk
|
|
This should make the Blade icon appear correctly in the Sequencer
|
|
|
|
A collection of smaller changes that are required in the /blender/source files. A lot of them are also due to variable renaming.
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3855
|
|
|
|
These are meant for use in Grease Pencil Draw mode.
|
|
|
|
|
|
Added: Airbrush and Chisel
Changed: Marker
Design: @mendio
Subscribers: mendio
Differential Revision: https://developer.blender.org/D5774
|
|
These are duplicates of HIDE_ON/OFF.
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
* EEVEE support through irradiance volume and light probe.
* New shader ball shape (designed by Robin Marin).
* New cloth and liquid shapes, removed monkey.
* Replace world sphere by toggle to use world for any shape.
* Slight bevel on cube.
* More subdivision for displacement preview.
* Fixed and improved UV mapping for all shapes.
* Material icon / asset preview now uses specified shape instead of always
a sphere. So for example hair material can be displayed as hair.
Ref T57683
|
|
No functional change, this adds LIB definition and args to cmake files.
Without this it's difficult to migrate away from 'BLENDER_SORTED_LIBS'
since there are many platforms/configurations that could break when
changing linking order.
Manually add and enable WITHOUT_SORTED_LIBS to try building
without sorted libs (currently fails since all variables are empty).
This check will eventually be removed.
See T46725.
|
|
- Tweaks to Paint Mode Fill and Sample tool icons
- Tweaks to GP Add Primitive icons
|
|
Also, revision of icons for paint modes, based on suggestions by Aslam Cader.
Previous commit accidentally included an extra file.
|
|
This reverts commit a44d75a9646cc37b3b6b10decd22db90247795d2.
|
|
Also, revision of icons for paint modes, based on suggestions by Aslam Cader.
|
|
This is fundamentally different from Shrink/Fatten for meshes, because the control points are not moved, only the radius.
Issue raised by Ronan Ducluzeau, name suggested by Campbell Barton
|