Age | Commit message (Collapse) | Author |
|
Now the list of masks can be ordered as is done in Layers.
This can be used to organize list and in the future refquired for new masking options.
|
|
Now if one stroke in the extremes of the stack is selected, other strokes are moved.
Reviewed By: pepeland, Dantti
Maniphest Tasks: T87321
Differential Revision: https://developer.blender.org/D10997
|
|
Following naming convention of most operators.
|
|
In Blender, we used to use the term 'draw' to refer to information
displayed to the user. For version 2.80, it was decided to change these
instances to 'display' instead. This was to avoid the ambiguity between
end-user drawing tools and display options.
From the Oxford English Dictionary:
- Draw: produce (a picture or diagram) by making lines and marks on
paper with a pencil, pen, etc.
- Display: show (data or an image) on a computer, television, or
other screen.
Therefore, we should use draw when referring to drawing tools for
making marks, but use display when referring to information
shown/displayed to the user. From a user POV, the computer displays
certain information, whereas the user draws a mark.
Apparently this change was not implemented consistently, so this patch
changes all remaining relevant instances of "draw".
Differential Revision: https://developer.blender.org/D10551
|
|
This makes the code more readable.
|
|
Following with the changes included to interpolate strokes of different number of points, a full review has been done in the interpolation tools.
* Interpolate now is a tool and not an operator. It was not logic to have this tool as a button.
* Interpolate tool parameters have been moved to topbar.
* Interpolate popover has been removed from topbar and interpolate `Sequence` operator has been moved to grease pencil menu.
* Interpolate Sequence now include a Redo panel.
* Interpolate tool now allows to select the strokes by pairs. This allows to interpolate any stroke with any stroke and not as before that it was only possible by drawing order. If no stroke is selected, the interpolation is done as before.
* Now is possible interpolate again if a previous keyframe exist. Before, it was impossible to interpolate two times in same frame and this made impossible to do the interpolation by groups of frames.
* New automatic option to `Flip strokes` if the stroke and end are not in the right position. Also the flip can be set manually for corner cases.
* Cleanup of menus related to interpolate.
* Fixed some bugs and removed parameters from scene because now all are tool or operator contained.
* Some code cleanup and function renames.
This commit also includes the some codebase to future implementation of the concept `Vertex Active` that now does not exist in grease pencil.
|
|
|
|
|
|
This commit is a refactor of the fill tool to solve several problems we had since the first version of the tool.
Changes:
* The filling speed has been improved for each step of the process with the optimization of each algorithm/function.
* New `AutoFit` option to fill areas outside of the viewport. When enable, the total size of the frame is calculated to fit the filling area.
* New support multiframe filling. Now it is possible to fill multiple similar frames in one go.
* New `Stroke Extension` option to create temporary closing strokes. These strokes can be displayed and adjusted dynamically using wheel mouse or PageUp/Down keys.
* Parameter `Resolution` now is named `Precision` and has been moved to topbar.
* `Resolution` now has decimals and can be lower than 1 to allow quick filling in storyboarding workflows. Maximum value has been set as 5.
* Parameter `Simplify` has been moved to Advanced panel.
* Improved fill outline detection. In some cases, the outline penetrated the area to be filled with unexpected results.
* Fixes some corner case bugs with infinite loops.
As a result of this refactor, also these new functionalities has been added.
* New support for multiframe in `Draw` mode. Any drawing in active frame is duplicated to all selected frame.
* New multiframe display mode. Keyframes before or after of the active frame are displayed using onion colors. This can be disable using Onion overlay options.
|
|
This was related to the changes for Layer and Frame duplication.
|
|
This option allows to duplicate the layer and keyframes but without copying the strokes. This is very handy for the cleanup and paint process.
|
|
ED_gpencil_stroke_material_editable
|
|
When using grease pencil for drawing Storyboards, it's very common to require a transform of the layers. This transform can be done using the offset modifier, but in some cases, the scene requires a lot of modifiers and makes the file hard to work.
This new feature adds a transforms Location, Rotation and Scale at Layer level, and allows to transform the layer without using a modifier, keeping the scene more clean.
{F9480695}
This feature was suggested by @pepeland after receiving feedback from several artists.
Also, done some code cleanup and rename some functions to get a better naming.
Maniphest Tasks: T83660
Differential Revision: https://developer.blender.org/D9761
|
|
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
|
|
|
|
Remove DNA headers, using forward declarations where possible.
Also removed duplicate header, header including it's self
and unnecessary inclusion of libc system headers from BKE header.
|
|
If the destination layer hadn't keyframe, a new keyframe was added and later the merge layer strokes were added, but this could change the animation because the new frame replaced the old drawings of the target layer.
Now, before merge the layer, all keyframes are added in the target layer in order to keep the drawings.
|
|
When change the order of the stroke using the arrange operator, the arrange was done, but the viewport did not display the result until you refresh the viewport.
|
|
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
|
|
|
|
There was a wrong duplication of all strokes and this accumulated all previous data for each frame.
Also a cleanup has been done in order to clarify what means each variable.
|
|
A parameter was added during development, but it was not needed and was
never removed. No functional changes.
|
|
Add an option to only draw icons for operator_enum menus. This is used
for drawing inline icon buttons in the outliner context menu for
collection color tagging.
Part of T77408
Differential Revision: https://developer.blender.org/D8880
|
|
Use invert_m4_m4_safe_ortho when joining objects so zero scaled axis
doesn't cause all points to be scaled to zero.
Instead geometry is left un-scaled on degenerate axes.
Report a warning in this case since users may want to adjust the
active objects scale.
|
|
Mistake in b077de086e14. I did the same fix for a few operators there,
but missed the object "Join" one.
The joining operator changes the layer content. So it must send a
notifier for that.
Before b077de086e14 that didn't cause a noticeable issue, because the
Outliner happened to listen to other notifiers (active/selection
changes) the operator sent and fully rebuilt its tree in response. Now
missing these notifiers can be more problematic, since we try to avoid
more rebuilds.
Added comments to the notifier types to avoid at least this pitfall.
|
|
This operator cleanup any frame that is equal to the previous one. This is very handy when convert a mesh animation to Gpencil and the mesh is static for several frames.
Differential Revision: https://developer.blender.org/D8149
|
|
This reverts commit 39b525e0f07fa25dcda54226ade789959b642dec and
3121015dceb1d269d79690c8f15c8e1406c9b09f as tests are failing.
|
|
Use binary search for querying deform weights.
Spring 02_020_A.anim.blend on Ryzen 1700X goes from 12.4 to 12.7fps.
During profiling it was detected that adding new items to the head was faster than adding to the tail.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D8127
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/gpencil` module.
No functional changes.
|
|
|
|
|
|
|
|
|
|
This error was introduced wit the change in commit https://developer.blender.org/rB6a850f3cc840
As the brushes were not created, all modes except Edit were broken.
Now, the brushes and palette are not created when load the file in versioning code, but when the mode is enabled.
Also, if the brush already exist, the parameters are not reset as it was done in the versioning code in order to keep user settings.
The same logic is used for the default palette.
|
|
This change is to align names with changes in T76498
|
|
All the driver-specific code in `fcurve.c` has been moved into a new file
`fcurve_driver.c`. The corresponding declarations have been moved from
`BKE_fcurve.h` to `BKE_fcurve_driver.h`.
All the `#include "BKE_fcurve.h"` statements have been investigated and
replaced with `BKE_fcurve_driver.h` where necessary.
No functional changes.
|
|
Now it's possible to select the material in context menu and new menu to select material.
The patch and workflow has been tested in greasepencil-object branch.
* New Material selector in Draw mode Context menu:
{F8499259}
* Pressing `U`key in Draw mode display material menu.
{F8503224}
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D7554
|
|
The dopesheet needs to have a frame to display the channel, so an empty frame is created in the current frame.
See T66505 for details of why an empty channel cannot be displayed.
|
|
The dopesheet needs to have a frame to display the channel, so an empty frame is created in the current frame.
See T66505 for details of why an empty channel cannot be displayed.
|
|
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
|
|
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
|
|
Follow up of b2ee1770d4c3 and 10c2254d412d, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
This was only reported for the 'Change Active Layer' operator [which was
not setting the channel as selected in the dopesheet], but this is also
the case elsewhere [where BKE_gpencil_layer_active_set is used], namely:
- gp_layer_remove_exec
- gp_layer_copy_exec
- gp_merge_layer_exec
- gp_layer_change_exec
- gp_layer_active_exec
- gp_stroke_separate_exec
We could set GP_LAYER_SELECT "by hand" in
BKE_gpencil_layer_active_set(), but there is already
animchan_sync_gplayer() that does that. For this, we need the
NA_SELECTED notifier though.
Maniphest Tasks: T75250
Differential Revision: https://developer.blender.org/D7311
|
|
|
|
When use the dopesheet add layer operator a new blank frame is created. It's very strange to create a layer and don't see anything in dopesheet.
If the layer is added in properties, the frame is not created.
Reviewed by: @pepeland @mendio
|
|
|
|
The weights array can be NULL.
|
|
The color was used in old version when palettes were used, but now all are materials
|
|
The old name was related to the old palettes.
|
|
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
|