Age | Commit message (Collapse) | Author |
|
This makes the code more readable.
|
|
Following with the changes included to interpolate strokes of different number of points, a full review has been done in the interpolation tools.
* Interpolate now is a tool and not an operator. It was not logic to have this tool as a button.
* Interpolate tool parameters have been moved to topbar.
* Interpolate popover has been removed from topbar and interpolate `Sequence` operator has been moved to grease pencil menu.
* Interpolate Sequence now include a Redo panel.
* Interpolate tool now allows to select the strokes by pairs. This allows to interpolate any stroke with any stroke and not as before that it was only possible by drawing order. If no stroke is selected, the interpolation is done as before.
* Now is possible interpolate again if a previous keyframe exist. Before, it was impossible to interpolate two times in same frame and this made impossible to do the interpolation by groups of frames.
* New automatic option to `Flip strokes` if the stroke and end are not in the right position. Also the flip can be set manually for corner cases.
* Cleanup of menus related to interpolate.
* Fixed some bugs and removed parameters from scene because now all are tool or operator contained.
* Some code cleanup and function renames.
This commit also includes the some codebase to future implementation of the concept `Vertex Active` that now does not exist in grease pencil.
|
|
|
|
This commit is a refactor of the fill tool to solve several problems we had since the first version of the tool.
Changes:
* The filling speed has been improved for each step of the process with the optimization of each algorithm/function.
* New `AutoFit` option to fill areas outside of the viewport. When enable, the total size of the frame is calculated to fit the filling area.
* New support multiframe filling. Now it is possible to fill multiple similar frames in one go.
* New `Stroke Extension` option to create temporary closing strokes. These strokes can be displayed and adjusted dynamically using wheel mouse or PageUp/Down keys.
* Parameter `Resolution` now is named `Precision` and has been moved to topbar.
* `Resolution` now has decimals and can be lower than 1 to allow quick filling in storyboarding workflows. Maximum value has been set as 5.
* Parameter `Simplify` has been moved to Advanced panel.
* Improved fill outline detection. In some cases, the outline penetrated the area to be filled with unexpected results.
* Fixes some corner case bugs with infinite loops.
As a result of this refactor, also these new functionalities has been added.
* New support for multiframe in `Draw` mode. Any drawing in active frame is duplicated to all selected frame.
* New multiframe display mode. Keyframes before or after of the active frame are displayed using onion colors. This can be disable using Onion overlay options.
|
|
ED_gpencil_stroke_material_editable
|
|
When using grease pencil for drawing Storyboards, it's very common to require a transform of the layers. This transform can be done using the offset modifier, but in some cases, the scene requires a lot of modifiers and makes the file hard to work.
This new feature adds a transforms Location, Rotation and Scale at Layer level, and allows to transform the layer without using a modifier, keeping the scene more clean.
{F9480695}
This feature was suggested by @pepeland after receiving feedback from several artists.
Also, done some code cleanup and rename some functions to get a better naming.
Maniphest Tasks: T83660
Differential Revision: https://developer.blender.org/D9761
|
|
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
|
|
Remove DNA headers, using forward declarations where possible.
Also removed duplicate header, header including it's self
and unnecessary inclusion of libc system headers from BKE header.
|
|
|
|
These operators existed since 2.83, but the menu was hidden by error.
Also the operators have been cleanup and make multiframe compatible.
Reviewed By: mendio
Differential Revision: https://developer.blender.org/D9671
|
|
This operators reset the vertex color information of the strokes.
If nothing is selected, all strokes are reset. If any is selected, only selected strokes are reset.
Also added a new menu Paint in Vertex Color mode.
Differential Revision: https://developer.blender.org/D9647
|
|
This option joins any stroke with an end near the actual stroke. Now it is not limited to the last stroke, any stroke in the same layer for the actual frame can be joined. The join can join two strokes drawing a third stroke.
If the end and the start of the result stroke are very small, the stroke is changed to be cyclic automatically.
There is a limit distance to join the stroke, if the distance is greater than this value, the strokes are not joined. Actually, a constant, threshold distance is used, but we could expose
as a parameter in the UI in the future.
The tool can be used with freehand drawing or with primitives.
Note: Great part of the patch is just a refactor of the old code to make it accessible and to keep code organized.
Reviewed By: mendio
Maniphest Tasks: T82377
Differential Revision: https://developer.blender.org/D9440
|
|
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
|
|
|
|
The behavior of the incremental snap did not take into account the
relative dimensions of the window, which resulted in a different behavior
if the area height was greater than the width.
|
|
Also, clarify comments.
|
|
These warnings were not vivible in MSVSC
|
|
Now the strokes join the points near, not always end with start.
Differential Revision: https://developer.blender.org/D9359
|
|
Approximately 141 changes of capitalization to conform to MLA title style.
Differential Revision: https://developer.blender.org/D8392
Reviewed by Julian Eisel
|
|
The new parameter allows to define if after cutting the stroke the cap of the cut side will be set as flat.
Before, the cap shape of the cut side always was equal to the original stroke, and in some situations, the rounded cap was visible.
Note: If the angle of the join is very extreme, it's still possible to view some sections of the cut stroke.,
|
|
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
the first material
|
|
|
|
Some underlying functionality was not ready for greasepencil:
- BKE_modifiers_get_virtual_modifierlist (now introduce dedicated BKE_gpencil_modifiers_get_virtual_modifierlist)
- BKE_modifiers_is_deformed_by_armature
- checks in drawing code
- checks in (pose) selection code
A couple of changes to make this work:
- `eGpencilModifierType_Armature` has to be respected (not only `eModifierType_Armature`)
- `OB_MODE_WEIGHT_GPENCIL` has to be respected (not only `OB_MODE_WEIGHT_PAINT`) -- (now use new `OB_MODE_ALL_WEIGHT_PAINT`)
- `gpencil_weightmode_toggle_exec` now shares functionality from `wpaint_mode_toggle_exec` -- moved to new `ED_object_posemode_set_for_weight_paint`
This patch will also set the context member "weight_paint_object" for greasepencil (otherwise some appropriate pose operators wont work when in weightpaint mode)
Reviewed By: campbellbarton
Maniphest Tasks: T63125
Differential Revision: https://developer.blender.org/D8483
|
|
Reviewers: sergey
Differential Revision: https://developer.blender.org/D8613
|
|
|
|
|
|
|
|
This is part of T79273 where separating a stroke would result in
multiuser gpencil data for the original object.
Real underlying issue seems to be that gpencil multiuser objects (also
the ones created by Alt+D duplicating) have a problem evaluating
modifiers correctly [this will need further investigation].
Not sure if this is a limitation of D5470?
This patch only corrects the usercount on separating [which already fixes
the scenario reported because singleuser gpencil modifiers work
correctly].
Note: we could have also called `ED_object_add_duplicate` with the
`USER_DUP_GPENCIL` dupflag -- that would have taken care of the usercount
--, but then the whole following logic in `gpencil_stroke_separate_exec`
would need to change from **adding** layers/frames/strokes to
**removing** these.
Part of T79273
Maniphest Tasks: T79273
Differential Revision: https://developer.blender.org/D8419
|
|
Before, when extrude a point, the extruded point is considered as the first point of the stroke, but this was not logic.
Now, the extrude point is considered as last.
Related to T79313
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/gpencil` module.
No functional changes.
|
|
|
|
|
|
When neither bounds or median is selected, snapping the cursor to
the selection was using bounds which often doesn't give useful results.
Resolves T78135
|
|
Using enum type itself in implementations, and uint in headers (as using
enums types in headers is a pain when enum are not defined and used in a
single same header file...).
|
|
When reproject a stroke sometimes is good to keep the copy of the original stroke to create volume effects
Related to T77639
{F8603513}
Reviewed By: mendio, pepeland
Maniphest Tasks: T77639
Differential Revision: https://developer.blender.org/D7963
50258
|
|
|
|
The Sculpt brushes were not properly initialized when use 2D template or other templates.
Also, using the default template (not factory settings) could be situations where the brushes were not updated.
This problem was introduced when some versioning code was removed in order to avoid duplicated brush creation.
|
|
|
|
|
|
In som ecases, the Paint was not ready when the brushes and palette were created. Now, first the paint is checked.
|
|
|
|
This error was introduced wit the change in commit https://developer.blender.org/rB6a850f3cc840
As the brushes were not created, all modes except Edit were broken.
Now, the brushes and palette are not created when load the file in versioning code, but when the mode is enabled.
Also, if the brush already exist, the parameters are not reset as it was done in the versioning code in order to keep user settings.
The same logic is used for the default palette.
|
|
|
|
|
|
|
|
Now the operator keep the weights of all strokes when joining.
|
|
- 'coords' is an abbreviation for coordinates, not 'cords'.
- Rename 'moves' to 'coords_len'.
|
|
Add missing outliner selection sync tagging for various non-outliner
operators.
* Curve separate
* Grease Pencil separate
* Mesh separate
* Make instances real
* 3D view paste
* Sequencer paste
* Armature delete, dissolve, separate, duplicate, subdivide, extrude,
click extrude, primitive add
* Pose Group select, delete
Resolves T71404
|