Age | Commit message (Collapse) | Author |
|
Remove redundant headers using
`./source/tools/utils_maintenance/code_clean.py`
Reviewed By: jmonteath
Ref D10364
|
|
This operators reset the vertex color information of the strokes.
If nothing is selected, all strokes are reset. If any is selected, only selected strokes are reset.
Also added a new menu Paint in Vertex Color mode.
Differential Revision: https://developer.blender.org/D9647
|
|
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
|
|
This patch adds a new operator to convert a black and white image into
grease pencil strokes.
If the image is not B/W, an internal conversion is done.
This is the first operator using Potrace, but we expect to add more features in next Blender versions.
Reviewed By: HooglyBoogly
Maniphest Tasks: T79877
Differential Revision: https://developer.blender.org/D8951
|
|
Now the operators are split to define different default values. This is also required for the future Bezier primitive tools.
This allows to show in the Topbar the number of subdivisions. Before this value was totally hidden and it was number of Edges. The wheelmouse can be used to override the value while running, but does not change the default value.
{F8766270}
All operators share same code.
Also, fixed some bad practices done with Toolbar in python.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D8506
|
|
This operator cleanup any frame that is equal to the previous one. This is very handy when convert a mesh animation to Gpencil and the mesh is static for several frames.
Differential Revision: https://developer.blender.org/D8149
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/gpencil` module.
No functional changes.
|
|
|
|
This patch adds two options:
- Convert a mesh to grease pencil strokes.
- Bake the mesh animation into grease pencil strokes.
Both are related and must be included in the same patch.
Related to tasks: T77629 and T77630
Notice: The conversion is done for mesh edges and it's not considering any visibility clipping. All edges are exported, no matters if it's visible or not.
Example of Convert a Mesh to Grease Pencil strokes:
{F8606028}
This conversion was inspired by the technique used by @luamono in this tweet: https://twitter.com/luamono/status/1239983662176841730
Example of Bake Animation (the video is a little outdate, but the basic functionality is the same, only small changes in UI):
{F8606032}
Reviewed By: mendio, pepeland
Maniphest Tasks: T77629, T77630
Differential Revision: https://developer.blender.org/D7983
|
|
Now it's possible to select the material in context menu and new menu to select material.
The patch and workflow has been tested in greasepencil-object branch.
* New Material selector in Draw mode Context menu:
{F8499259}
* Pressing `U`key in Draw mode display material menu.
{F8503224}
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D7554
|
|
Follow up of b2ee1770d4c3 and 10c2254d412d, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
|
|
The color was used in old version when palettes were used, but now all are materials
|
|
|
|
The old name was related to the old palettes.
|
|
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
|
|
This allows to have annotation panels and grease pencil object panel at the same time.
Differential Revision: https://developer.blender.org/D6467
|
|
selected stroke material
The operator set as active object material the material used in the selected stroke.
Access to the operator were added in the stroke menu and context stroke menu.
Reviewers: antoniov, pepeland
Tags: #bf_blender, #grease_pencil
Differential Revision: https://developer.blender.org/D5692
|
|
This mode simplify the stroke doing a resampling of the points and generate new geometry at the distance defined.
Sample function developed by @NicksBest
New Resample Stroke operator
This operator recreates the stroke geometry with a predefined length between points.
The operator uses the same code used in Simplify modifier.
Reviewers: @mendio
|
|
Merge points when the distance is less than a predefined value.
The method to interpolate the position created a wrong merge. Now, always the secondary point is merged with the first one (merge at first), except the last point.
|
|
|
|
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4222
|
|
- Move connected & projected into individual toggles.
- Top-level proportional editing button now only toggles.
- Use popover for proportional edit-mode falloff and options.
Note that it's no longer possible to toggle connected via key bindings,
although this could be supported again if it's needed.
Resolves T58081
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
This operator works similar to mesh operator but for Stroke and Points data.
Also minor cleanup in Normalize operator.
|
|
This works similar to mesh operator, but using Stroke and Points data.
|
|
|
|
When duplicates a stroke using Shift+D, the proportional must be disabled.
|
|
Keymap: E - Extrude Gizmo supported.
If the extrude points are the first or last of the stroke, the stroke is extended.
If the extrude points are in the middle of the stroke, a new stroke is created because the grease pencil strokes can be only with 2 extremes and fold the stroke to get a new point gets very bad results.
Still pending define a new icon. Also, it could be good to set by default XYZ axis in the gizmo.
Note: There is a change in the transform_gizmo_extrude_3d.c gizmo for OB_MODE_EDIT_GPENCIL. This change must be undo when the mode will be integrated into OB_MODE_EDIT, but while we have both modes, we need to keep this code in order to keep running the gizmo.
|
|
New edit mode operator and post-processing brush option.
Trim works on a single GP stroke. It removes trailing points before and after the first intersection (or loop) nearest to the start of the stroke.
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
Name was part of the header GPL text.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
This commit groups a set of new tools that were tested in grease pencil object branch before moving to master. We decide to do all the development in a separated branch because it could break master during days or weeks before the new tools were ready to deploy.
The commit includes:
- New Cutter tool to trim strokes and help cleaning up drawings.
- New set of constraints and guides to draw different types of shapes. All the credits for this development goes to Charlie Jolly (@charlie), thanks for your help!
- Segment selection mode to select strokes between intersections.
- New operator to change strokes cap mode.
- New option to display only keyframed frames. This option is very important when fill strokes with color.
- Multiple small fixes and tweaks.
Thanks to @pepeland and @mendio for their ideas, tests, reviews and support.
Note: Still pending the final icons for Cutter in Toolbar and Segment Selection in Topbar. @billreynish could help us here?
|
|
This operator allows to create a new stroke joining several selected points of different strokes.
The new stroke will use the current material.
To use, first select the points to be merged. Optionally can remove the old points and strokes.
The operator is available in Edit mode in the Specials menu and Stroke menu.
|
|
Smooth a stroke, in edit mode, similar how mesh operator works with meshes.
|
|
This makes the operator name more consistent. Part of T57818
|
|
- Replace BKE_brush_getactive_gpencil -> BKE_paint_brush
(no need for per-paint-type brush access).
- Rename TOT_GP_EDITBRUSH_TYPES -> GP_EDITBRUSH_TYPE_MAX
(avoid sharing prefix w/ unrelated constants).
- Rename instances of `GP_EditBrush_Data` to 'gp_brush'
(`Brush` is typically called 'brush').
|
|
|
|
|
|
This should be purely an implementation change,
for end users there should be no functional difference.
The entire key configuration is in one file with ~5000 lines of code.
Mostly avoiding code duplication and preserve comments and utility
functions from the C code.
It's a bit long but for searching and editing it's also convenient to
have it all in one file.
Notes:
- Actual keymap is shared by blender / blender_legacy
and stored in `keymap_data/blender_default.py`
This only generates JSON-like data to be passed into
`keyconfig_import_from_data`, allowing other presets to load and
manipulate the default keymap.
- Each preset defines 'keyconfig_data'
which can be shared between presets.
- Some of the utility functions for generating keymap items still
need to be ported over to Python.
- Some keymap items can be made into loops (marked as TODO).
See: D3907
|
|
This can be done via WM_OT_context_set_enum
|
|
Replace grease pencil specific brush select operator.
|
|
The toolbar now shows brush types, the brush selector now
only shows brushes matching the current tool type.
Details:
- Add's Paint.tool_slots (used by the toolbar).
- Removed custom grease pencil brush tool code.
- Bumped subversion.
See T57526 for details.
|
|
|
|
See: T56648
|
|
|
|
|
|
The pie menus were a legacy of old grease pencil and now need a full redesign or maybe a new add-on.
While we decide the way to go, the pie menus are disabled.
|