| Age | Commit message (Collapse) | Author |
|---|
|
Before only it was only possible interpolate frames of `Keyframe` type. Now all types except `Breakdown` can be used.
`Breakdown` cannot be used because it would be impossible interpolate two times because the extremes of the interpolation would change and the clean operator would not work.
|
|
|
|
When adding a notifier, `reference` data can be passed. The notifier system
uses this to filter out listeners, for example if data of a scene changes,
windows showing a different scene won't get the notifiers sent to their
listeners.
For the `NC_SPACE` notifiers, a number of places also passed the space as
`reference`, but that wasn't used at all. The notifier would still be sent to
all listeners in all windows (and the listeners didn't use it either). Causing
some unnecessary updates (e.g. see ed2c4825d3e2344).
With this commit, passing a space will make sure the notifier is only sent to
that exact space. Some code seems to already have expected that to be the case.
However there were some cases that passed the space as `reference` without
reason, which would break with this commit (meaning they wouldn't redraw or
update correctly).
Corrected these so they don't pass the space anymore.
|
|
In some situations the strokes could be tagged before filling, so it's necessary to reset before.
|
|
Used for local structs/variables,
since `ofs` is by far the most widely used abbreviation.
|
|
|
|
Following naming convention of most operators.
|
|
Now, if the Autokey is not enabled, a new frame is not created and it is used the last active one. If no active frame, a message is displayed and the operation is canceled.
This is a common request for 2D artists.
Also, grease pencil was not working as Blender does in other areas.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D10557
|
|
Use event modifier checks that follow most of Blender's code.
|
|
|
|
In Blender, we used to use the term 'draw' to refer to information
displayed to the user. For version 2.80, it was decided to change these
instances to 'display' instead. This was to avoid the ambiguity between
end-user drawing tools and display options.
From the Oxford English Dictionary:
- Draw: produce (a picture or diagram) by making lines and marks on
paper with a pencil, pen, etc.
- Display: show (data or an image) on a computer, television, or
other screen.
Therefore, we should use draw when referring to drawing tools for
making marks, but use display when referring to information
shown/displayed to the user. From a user POV, the computer displays
certain information, whereas the user draws a mark.
Apparently this change was not implemented consistently, so this patch
changes all remaining relevant instances of "draw".
Differential Revision: https://developer.blender.org/D10551
|
|
Move some drawing code from `area.c` and `ed_util.c` into `ed_draw.c`.
This is to support the new generic slider that wil be used in T81785.
No functional changes.
Reviewed By: #animation_rigging, #user_interface, Severin, sybren
Maniphest Tasks: T81785
Differential Revision: https://developer.blender.org/D9313
|
|
When a GP object was parented to e.g. a bone, box selection as well as
point selection were broken in that the selection from the user would
not correlate with what was actually being selected.
The issue was that box and point selection did not use the active
evaluated stroke data. The fix uses the correct data.
Reviewed By: antoniov
Maniphest Tasks: T85987
Differential Revision: https://developer.blender.org/D10555
|
|
Fill only if it never comes in contact with an edge. It is better not to fill than to fill the entire area, as this is confusing for the artist.
Differential Revision: https://developer.blender.org/D10536
|
|
|
|
Multiply the two number together. If the sign of the result is positive, then the sign was the same. If the sign of the result is negative, then the signs were different.
|
|
|
|
Improved the calculation of the distances and changed the variable names to make it more readable.
Still, there are some corner cases that could be not handled properly, but we keep as is to test more real drawings to analyze if the small number of corner cases needs to be fixed or not.
|
|
|
|
If the lines cross, but the angle is very sharp, check the distance between the extremes.
|
|
There was a mistake in the variables saved and when resolution of the UI was not 1.0, the viewport was offset.
|
|
This makes the code more readable.
|
|
|
|
Following with the changes included to interpolate strokes of different number of points, a full review has been done in the interpolation tools.
* Interpolate now is a tool and not an operator. It was not logic to have this tool as a button.
* Interpolate tool parameters have been moved to topbar.
* Interpolate popover has been removed from topbar and interpolate `Sequence` operator has been moved to grease pencil menu.
* Interpolate Sequence now include a Redo panel.
* Interpolate tool now allows to select the strokes by pairs. This allows to interpolate any stroke with any stroke and not as before that it was only possible by drawing order. If no stroke is selected, the interpolation is done as before.
* Now is possible interpolate again if a previous keyframe exist. Before, it was impossible to interpolate two times in same frame and this made impossible to do the interpolation by groups of frames.
* New automatic option to `Flip strokes` if the stroke and end are not in the right position. Also the flip can be set manually for corner cases.
* Cleanup of menus related to interpolate.
* Fixed some bugs and removed parameters from scene because now all are tool or operator contained.
* Some code cleanup and function renames.
This commit also includes the some codebase to future implementation of the concept `Vertex Active` that now does not exist in grease pencil.
|
|
|
|
This will allow using C++ data structures to draw node error messages.
This required removing a forward declared enum for grease pencil undo.
Compiles with clang tidy.
|
|
|
|
Corrects approximately 36 spelling errors in source variable names.
Differential Revision: https://developer.blender.org/D10347
Reviewed by Hans Goudey
|
|
|
|
The windows compiler is not as sensible to this warnings as Linux.
|
|
|
|
|
|
ccea44e76bbd06309e0012ed3213a9028e8cb32c missed this expression.
|
|
|
|
These warnings were not detected by Windows compiler as the Linux compiler does.
|
|
|
|
The problem was the stroke was reproject flat to view if the axis was View. Now, if the operation is using depth, the stroke is not reprojected.
Related to T85082
|
|
Remove redundant headers using
`./source/tools/utils_maintenance/code_clean.py`
Reviewed By: jmonteath
Ref D10364
|
|
|
|
|
|
This commit is a refactor of the fill tool to solve several problems we had since the first version of the tool.
Changes:
* The filling speed has been improved for each step of the process with the optimization of each algorithm/function.
* New `AutoFit` option to fill areas outside of the viewport. When enable, the total size of the frame is calculated to fit the filling area.
* New support multiframe filling. Now it is possible to fill multiple similar frames in one go.
* New `Stroke Extension` option to create temporary closing strokes. These strokes can be displayed and adjusted dynamically using wheel mouse or PageUp/Down keys.
* Parameter `Resolution` now is named `Precision` and has been moved to topbar.
* `Resolution` now has decimals and can be lower than 1 to allow quick filling in storyboarding workflows. Maximum value has been set as 5.
* Parameter `Simplify` has been moved to Advanced panel.
* Improved fill outline detection. In some cases, the outline penetrated the area to be filled with unexpected results.
* Fixes some corner case bugs with infinite loops.
As a result of this refactor, also these new functionalities has been added.
* New support for multiframe in `Draw` mode. Any drawing in active frame is duplicated to all selected frame.
* New multiframe display mode. Keyframes before or after of the active frame are displayed using onion colors. This can be disable using Onion overlay options.
|
|
Approximately 91 spelling corrections, almost all in comments.
Differential Revision: https://developer.blender.org/D10288
Reviewed by Harley Acheson
|
|
|
|
Move `eUndoStepDir` to `BKE_undo_system.h` and use its values
everywhere.
Note that this also introduce the `STEP_INVALID` value in that enum.
Finally, kept the matching struct members in some lower-level readfile
code as an `int` to avoid having to include `BKE_undo_system.h` in a lot
of unrelated files.
|
|
|
|
Drawing on e.g. the X-Z plane was broken due to an earlier
commit (rBef28da262342). This was causing the projection when drawing
on an axis plane to fail.
The fix checks that the user is in view plane projection mode.
Reviewed By: antoniov
Maniphest Tasks: T85203
Differential Revision: https://developer.blender.org/D10252
|
|
In two cases the percentage property was actually used incorrectly, as
pointed out in T82070. The range was [0, 1], but the properties were still
displayed as percentages.
There is a preference to control whether to display factors or
percentages, so it usually doesn't make sense to manually define
properties as percentages.
Resolves T82070
Differential Revision: https://developer.blender.org/D9344
|
|
|
|
An extra `p->` was added for some reason in a recent commit.
Additionally, there's no reason for the flag to be kept as a pointer,
so just dereference it at the start of both functions.
|
|
When the drawing plane was set to view and the user would pan their
camera sideways, the drawing would be more and more distorted and
projected further back.
The fix projects the strokes to view when the user is looking through
the camera or has the drawing plane set to view.
Reviewed By: antoniov
Maniphest Tasks: T85082
Differential Revision: https://developer.blender.org/D10213
|
