Age | Commit message (Collapse) | Author |
|
Differential Revision: https://developer.blender.org/D12962
|
|
The problem was the number of points for each edge of the box was wrong and the wheelmouse effect was anulated.
Also fixed the value displayed in the status bar to keep consistency with subdivision value.
Reviewed By: lichtwerk
Maniphest Tasks: T93999
Differential Revision: https://developer.blender.org/D1363
|
|
The eraser checks the current, previous and next point (and sets pc0,
pc1 & pc2 corresponding to that for futher occlusion/brush/clipping
checks). For the very first point, it sets pc0 to pc1 [which makes sense,
there is no previous point, so we should assume the previous segment is
"visible" as soon as the first point is], but does so *before* pc1 is
even calculated. This makes following occlusion/brush/clipping checks
work with zero values [which leads to no earsing in most cases].
Now *first* calculate pc1, *then* set pc0 to pc1.
Maniphest Tasks: T94137
Differential Revision: https://developer.blender.org/D13593
|
|
Renamed or removed parameters which no longer exist.
|
|
Also add groups in some files.
|
|
his new modifier is equals to the existing mesh modifier but adapted to grease pencil.
The underlying functions used to calculate the shrink are the same used in meshes.
{F11794101}
Reviewed By: pepeland, HooglyBoogly
Differential Revision: https://developer.blender.org/D13192
|
|
Caused by {rB3b6ee8cee708}
The raw data is copied here correctly
[`BKE_gpencil_stroke_weights_duplicate` in
`BKE_gpencil_stroke_duplicate`] but the vertex groups names are missing.
Prior to above commit is was enough to have `ED_object_add_duplicate`
(this seemingly took care of duplicating object's defbase).
Now vertex groups names sit on the `bGPdata` rather than the `Object`,
and since the separate operation creates **new** `bGPdata` we have to
copy vertex groups names - and active index - over [via
`BKE_defgroup_copy_list`].
Maniphest Tasks: T93728
Differential Revision: https://developer.blender.org/D13509
|
|
Ref T92709
|
|
These existing names were unhelpful at best, actively confusing at
worst. This patch renames them to be consistent with the terms
used to refer to the values in the UI.
- `width` -> `offset`
- `ext1` -> `extrude`
- `ext2` -> `bevel_radius`
Differential Revision: https://developer.blender.org/D9627
|
|
Caused by {rBaa0ac0035a0d}.
Similar solution to {rBc0fdaf700a5}.
|
|
Bug introduced in {rBaa0ac0035a0d}.
The invalid depth fallback was changed to `FLT_MAX` in order to match the
annotation and gpencil operations.
This broke the `Interactive Light Track` operator which invalidates the
operation if the depth value is `1.0f`.
The chosen solution was to change the value tested in the annotation and
gpencil operations.
|
|
- When and is used in labels use ampsand
- When used in description use 'and'
|
|
When cut an stroke using the option Flat Caps, the falt was not done if the cut was done in the middle of the stroke.
Now the flat is applied to the segments created and also some cleanup of the code done.
|
|
This new option allows to combine all layers in the active one. Also the merge down option has been improved.
Reviewed By: mendio, pablo vazquez (UI)
Differential Revision: https://developer.blender.org/D13054
|
|
Issue seen when setting `Stroke Placement` of type `Stroke`.
Regression introduced in {rBaa0ac0035a0d3601672a0c732e3f8f932a36fc04}.
|
|
Operations such as erasing with occlusion and drawing on the surface
require reading the depth buffer.
However, this is being done with minimal efficiency.
Currently, to read the depth corresponding to each point of the new stroke,
a ReadPixel is called to send a message to the GPU and read the depth of
the corresponding pixel in the VRAM.
The communication between GPU and CPU is known to be a slow operation so
it is good to be avoided.
Therefore, save the entire depth buffer in a cache to be read directly
from the RAM.
(Also the `ED_view3d_autodist_depth` and `ED_view3d_autodist_depth_seg` have
been removed since they are no longer used).
Reviewed By: antoniov, fclem
Differential Revision: https://developer.blender.org/D10894
|
|
`pt0` was read when `NULL` and `is_occluded_pt1` could be read even if
it is not initialized.
|
|
|
|
Use arrays for wmEvent coordinates, this quiets warnings with GCC11.
- `x, y` -> `xy`.
- `prevx, prevy` -> `prev_xy`.
- `prevclickx, prevclicky` -> `prev_click_xy`.
There is still some cleanup such as using `copy_v2_v2_int()`,
this can be done separately.
Reviewed By: campbellbarton, Severin
Ref D12901
|
|
|
|
Pencil
Not naming the auto-generated vertexgroup after the selected bone was
just confusing (since the group would not have an effect), so now use
similar code that is used for meshes for greasepencil as well.
Maniphest Tasks: T92314
Differential Revision: https://developer.blender.org/D12906
|
|
By argument naming and convention this is the intended argument order.
|
|
Move runtime parameters out of context creation.
Not being able to choose another region and v3d limits the use of the
snap API.
|
|
- Drawing annotations used a deprecated value to detect
if drawing was supported.
- ED_space_sequencer_check_show_strip was checking the preview
image type (which doesn't impact strip display).
Signed-off-by: Campbell Barton <ideasman42@gmail.com>
|
|
The Paint operator only works in SPACE_VIEW3D and this is checked in the poll mtehod, so it's not logic check again.
These checkings were part of the old grease pencil but it was not removed.
|
|
The function was not doing anything and only was calling another function.
|
|
This flag was used in older versions, but now is not used anymore.
|
|
The eval data is updated at the end of the function and this call just adds a calculation not used.
|
|
that are assigned to particle systems/hair.
`BKE_object_material_slot_used` would only check obdata usages, but
particle settings can also (weirdly enough) use objects' material slots.
So now, as its name suggests, `BKE_object_material_slot_used` does take
an object as parameter, and also checks for potential slot usage from
psys in the object.
|
|
|
|
In some cases the stroke has 0 points and this must be skipped in the interpolation.
|
|
Move overlay flags into SequencerPreviewOverlay and
SequencerTimelineOverlay structs.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12569
|
|
- Bend (Transform).
- Extrude to Cursor.
- Lasso Select (related operators such as node-cut links, mask.. etc).
- Rip Mesh / UV's.
- Vertex/Edge Slide.
|
|
|
|
The color was not converted to Linear from Brush color.
|
|
When joining two strokes in paint mode using the auto merge option, the join was very hard if the thickness was too different.
This patch adds a smooth to the join in order to get better transition.
Also fixed the problem to join existing strokes very far from actual stroke.
Some cleanup and rename of old code is included in order to make code more readable.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D12362
|
|
|
|
Now if the frame does not exist in destination layer, the frame type of merge layer is used.
For existing frames in destination layer, the existing type is not changed.
|
|
Also hyphenate 'mouse-move' use doxy sections in render_update.c &
move function comment from the header to the source.
|
|
Avoid API misuse that caused leaks in T90791 &
2788b0261cb7d33a2f6f2978ff4f55bb4987edae.
|
|
These lines were very old debug code and now it's not required because the code is very tested.
|
|
This patch adds the missing ability to keep the vertex groups when converting to a grease pencil object. This is increadible useful to create rigged grease pencil objects which move together with rigged meshes.
Differential Revision: https://developer.blender.org/D12249
|
|
This addresses reduced visibility of scenes (as displayed in the VR
headset) that can result from the 8-bit color depth format currently
used for XR swapchain images.
By switching to a swapchain format with higher color depth (RGB10_A2,
RGBA16, RGBA16F) for supported runtimes, visibility in VR should be
noticeably improved.
However, current limitations are lack of support for these higher
color depth formats by some XR runtimes, especially for OpenGL.
Also important to note that GPU_offscreen_create() now explicitly
takes in the texture format (eGPUTextureFormat) instead of a
"high_bitdepth" boolean.
Reviewed By: Julian Eisel, Clément Foucault
Differential Revision: http://developer.blender.org/D9842
|
|
|
|
|
|
|
|
|
|
Select strokes or points randomly (similar to meshes).
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D12157
|
|
`bugprone-signed-char-misuse`
|
|
|