| Age | Commit message (Collapse) | Author |
|---|
|
The new layer option must be the first in the menu.
Differential Revision: https://developer.blender.org/D15255
|
|
- Avoid ambiguity which caused these values to be confused, use `mval`
for region relative mouse coordinates, otherwise `event_xy`.
- Pass region relative coordinates to sample_detail_dyntopo &
sample_detail_voxel as there is no reason to use screen-space values.
- Rename invalid use of mval for screen-space coordinates.
|
|
The operator set the color but the factor of the mix value was not updated and as the default value was 0, the color was not vivible and only worked when the stroke was previously painted.
|
|
|
|
|
|
into enums
The transformation snapping code contains a bunch of `#define`s, some ambiguously or incorrectly named attributes. This patch contains refactored code to improve this. This patch does (should) not change functionality of snapping.
Clarified ambiguously / incorrectly named attributes.
- "Target" is used to refer to the part of the source that is to be snapped (Active, Median, Center, Closest), but several other areas of Blender use the term "target" to refer to the thing being snapped to and "source" to refer to the thing getting snapped. Moreover, the implications of the previous terms do not match the descriptions. For example: `SCE_SNAP_TARGET_CENTER` does not snap the grabbed geometry to the center of the target, but instead "Snap transforamtion center onto target".
- "Select" refers to the condition for an object to be a possible target for snapping.
- `SCE_SNAP_MODE_FACE` is renamed to `SCE_SNAP_MODE_FACE_RAYCAST` to better describe its affect and to make way for other face snapping methods (ex: nearest).
Refactored related `#define` into `enum`s. In particular, constants relating to...
- `ToolSettings.snap_flag` are now in `enum eSnapFlag`
- `ToolSettings.snap_mode` are now in `enum eSnapMode`
- `ToolSettings.snap_source` (was `snap_target`) are now in `enum eSnapSourceSelect`
- `ToolSettings.snap_flag` (`SCE_SNAP_NO_SELF`) and `TransSnap.target_select` are now in `enum eSnapTargetSelect`
As the terms became more consistent and the constants were packed together into meaningful enumerations, some of the attribute names seemed ambiguous. For example, it is unclear whether `SnapObjectParams.snap_select` referred to the target or the source. This patch also adds a small amount of clarity.
This patch also swaps out generic types (ex: `char`, `short`, `ushort`) and unclear hard coded numbers (ex: `0`) used with snap-related enumerations with the actual `enum`s and values.
Note: I did leave myself some comments to follow-up with further refactoring. Specifically, using "target" and "source" consistently will mean the Python API will need to change (ex: `ToolSettings.snap_target` is not `ToolSettings.snap_source`). If the API is going to change, it would be good to make sure that the used terms are descriptive enough. For example, `bpy.ops.transform.translate` uses a `snap` argument to determine if snapping should be enabled while transforming. Perhaps `use_snap` might be an improvement that's more consistent with other conventions.
This patch is (mostly) a subset of D14591, as suggested by @mano-wii.
Task T69342 proposes to separate the `Absolute Grid Snap` option out from `Increment` snapping method into its own method. Also, there might be reason to create additional snapping methods or options. (Indeed, D14591 heads in this direction). This patch can work along with these suggestions, as this patch is trying to clarify the snapping code and to prompt more work in this area.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D15037
|
|
|
|
To make it consistent with collections, now it's possible to name the new layer created using the `Move to Layer` option.
Differential Revision: https://developer.blender.org/D15092
|
|
Add the following macros for enums as support for these features wasn't
all that obvious and there were some inconsistencies in their use.
- RNA_ENUM_ITEM_HEADING(name, description)
- RNA_ENUM_ITEM_SEPR
- RNA_ENUM_ITEM_SEPR_COLUMN
|
|
|
|
This bug was introduced in commit https://developer.blender.org/rB5188c14718c56e4d088d3c5bb3ce3ed9ed8b7bdc because the object transform was not applied when baking the object.
Thanks to @frogstomp for the head up.
|
|
The algorithm is not designed to be used with Closed strokes (cyclic) and actually the result is arbitrary. In order to avoid this, now the closed strokes never are merged.
Related to T98235
Feedback by: @mendio
|
|
|
|
Assign get_name functions for select picking and circle select
so modifier keys show the result of holding the modifiers.
|
|
|
|
The problem was the layer transformation was already applied in the layer and if we apply in the bake, we are doing double transformation.
Differential Revision: https://developer.blender.org/D14844
|
|
|
|
|
|
Now it's possible to use auto masking at 3 levels:
* Stroke
* Layer
* Material
The masking options can be combined and allows to limit the effect of the sculpt brush.
Diff Revision: https://developer.blender.org/D14589
|
|
|
|
The type of the key was changed from string to integer in 66da2f537ae8, but
the GSet was still being created for string keys.
As long as the integers stay small enough, this even kind of works on
little-endian systems, but of course it should use an integer hash instead.
|
|
If the layer was transformed the grab brush was not initialized as expected because it was using an untrasformed matrix.
|
|
Calling duplicate operation without selecting anything registers an undo
step. If nothing is selected (keyframe, curve, object, etc.), cancel the
operator execution to prevent undo push.
Patch improves following operators:
- ACTION_OT_duplicate
- GPENCIL_OT_duplicate
- GRAPH_OT_duplicate
- MESH_OT_duplicate
- NODE_OT_duplicate
- OBJECT_OT_duplicate
Reviewed By: campbellbarton
Ref D14511
|
|
|
|
|
|
Add new `BKE_id_is_editable` helper in `BKE_lib_id.h`, that supercedes
previous check (simple `ID_IS_LINKED()` macro) for many editing cases.
This allows to also take into account 'system override' (aka
non-editable override) case.
Ref: {T95707}.
|
|
The check for the selected status was missing in the case
where the stroke one has one point.
Differential Revision: http://developer.blender.org/D14490
|
|
Use the pass-through matching the view3d.select operator.
|
|
This is meant to allow using C++ data structures in this file
as a performance improvement. Particularly `Vector` instead
of `ListBase` for `duplilist`. This changes builds on all
platforms on the buildbot.
|
|
Following the logic is not necessary to check the mouse button because the status has changed before.
|
|
The problem was the stroke was created in the inverted loop before checking if the total of points is 0 and exit the loop.
Also some code Cleanup.
|
|
This patch makes the grease pencil smooth operation symmetric.
It also increases the performance a lot if strong smoothing is
required. Additionally there is an option for the position smooth
operation to keep the shape closer to the original for more iterations.
Since the result differs from the previous algorithm, versioning is used
to change the iterations and factor to match the old result.
Differential Revision: http://developer.blender.org/D14325
|
|
Follow conventions from T85728.
|
|
When using inverted filling and click inside a closed area and not outside as is expected, the algorithm to detect the contour to fill is unable to find the filling shape and try to fill outside of the valid index.
The infinite loop was adding more memory for each loop and the process continued while there was system resources and finally crashed the system.
As the tool in negative mode is designed to fill all areas when you click outside of any shape, now the algorithm check if the outline is not working as expected and cancels the filling process.
|
|
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3dbec we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
|
|
Lets `makesrna` generate a `RNA_prototypes.h` header with declarations for all
RNA properties. This can be included in regular source files when needing to
reference RNA properties statically.
This solves an issue on MSVC with adding such declarations in functions, like
we used to do. See 800fc1736748. Removes any such declarations and the related
FIXME comments.
Reviewed By: campbellbarton, LazyDodo, brecht
Differential Revision: https://developer.blender.org/D13837
|
|
|
|
The curve selection was wrongly checked.
|
|
The stroke curve data could be NULL.
|
|
Activating a gizmo used the windows eventstate which may have values
newer than the event used to activate the gizmo.
This meant transforms check for the key that activated transform
could be incorrect.
Support passing an event when calling operators to avoid this problem.
|
|
Annotation tool is used as a general mark tool for many add-ons. To be able to detect when an annotation is done is very handy to integrate the annotation tool in add-ons and other studio workflows.
The new callback names are: `annotation_pre` and `annotation_post`
Both callbacks are exposed via the Python module `bpy.app.handlers`
Example use:
```
import bpy
def annotation_starts(gpd):
print("Annotation starts")
def annotation_done(gpd):
print("Annotation done")
bpy.app.handlers.annotation_pre.clear()
bpy.app.handlers.annotation_pre.append(annotation_starts)
bpy.app.handlers.annotation_post.clear()
bpy.app.handlers.annotation_post.append(annotation_done)
```
Note: The handlers are called for any annotation tool, including eraser.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D14221
|
|
|
|
Add 'ID_ACTION' context to some animation curve interpolation enums.
Related to T95506/T43295.
|
|
Correct misspellings in code comments of "vertex" and "vertices".
See D13932 for more details.
Differential Revision: https://developer.blender.org/D13932
Reviewed by Harley Acheson
|
|
- Rename ED_view3d_win_to_delta `mval` argument to `xy_delta` as it
as it was misleading since this is an screen-space offset not a region
relative cursor position (typical use of the name `mval`).
Also rename the variable passed to this function which also used the
term `mval` in many places.
- Re-order the output argument of ED_view3d_win_to_delta last.
use an r_ prefix for return arguments.
- Document how the `zfac` argument is intended to be used.
- Split ED_view3d_calc_zfac into two functions as the `r_flip` argument
was only used in some special cases.
|
|
|
|
|
|
To keep consistency with the new contract option, the dilate now expand the shape beyond the internal closed area.
Note: This was committed only in master (3.2) by error.
|
|
This is requested by artist for some animation styles where is necessary to fill the area, but create a gap between fill and stroke.
Also some code cleanup and fix a bug in dilate for top area.
Reviewed By: pepeland, mendio
Differential Revision: https://developer.blender.org/D14082
Note: This was committed only in master (3.2) by error.
|
|
Using flags makes checking multiple modifiers at once more convenient
and avoids macros/functions such as IS_EVENT_MOD & WM_event_modifier_flag
which have been removed. It also simplifies checking if modifier keys
have changed.
|
