| Age | Commit message (Collapse) | Author |
|---|
|
Adds an overlay option to show/hide the spline points & lines of masks in the Mask Editor.
It also moves the "smooth" option up (its position left of the selection dropdown was missleading).
{F11847272}
This emerged from a discussion in https://developer.blender.org/D12776
Differential Revision: https://developer.blender.org/D13314
|
|
|
|
No functional changes.
|
|
|
|
This patch fixes T90120. The fundamental problem is that 2d and the old 3d paint modes share a single Paint struct, ToolSettings->imapaint. This patch is a temporary fix until the new 3d paint mode (which has its own Paint struct) is released.
The patch works by listening for `NC_SCENE|ND_MODE` inside `image_listener` in `space_image.c`. It does not use `ED_space_image_paint_update` since that requires a `bMain.` Instead it calls `paint_cursor_start` (which is promoted to `ED_paint_cursor_start`). `image_paint_poll` is also promoted to an `ED_` function.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D14946
Ref D14946
|
|
The original fix for T97366 was too restrictive and breaks real-world
cases of single-file UDIM textures. See D13297 for an example.
This patch effectively reverts the original fix and instead fixes the
downstream code to accept single-file ranges as necessary.
Note: This means it is very important for users to make use of the
"UDIM detection" option during `image.open` or drag n' drop scenarios in
order to declare their intent when loading their files.
Differential Revision: https://developer.blender.org/D14853
|
|
Add blank lines after file references to avoid them being interpreted as
doc-strings the following declarations.
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
|
|
MSVC used to warn about const mismatch for arguments passed by value.
Remove these as newer versions of MSVC no longer show this warning.
|
|
Ref T92709
|
|
This margin was inconsistently calculated: only taking the
visible region and interface scale into account in some cases.
|
|
Use shortcut matching the 3D view & popover in the header
|
|
Implements T89789, T89792, custom grid (described as dynamic grid in
T78389) and UV grid snapping (T78391)
Replaces the default UV editor grid with 2 new types of grid :
* Custom grid: Allows the user to create an NxN grid, where the value
of N is specified by the user.
* Subdividing grid: Subdivides the UV editor grid when the user
zooms in the viewport and vice versa when zooming out.
UV snapping improvements :
* Increment snapping: Increment values for snapping are calculated based
on which grid type is being used in the UV editor
(subdividing or custom). In general the increment value is equal to
the distance between 2 visible grid lines.
* Absolute grid snap: New toggle added to increment snapping option in
the UV editor, allows UV grid snapping during translation.
Reviewed By: campbellbarton
Ref D12684
|
|
This was left over from when changing the image set the faces texture.
|
|
In the current implementation, cryptomatte passes are connected to the node
and elements are picked by using the eyedropper tool on a special pick channel.
This design has two disadvantages - both connecting all passes individually
and always having to switch to the picker channel are tedious.
With the new design, the user selects the RenderLayer or Image from which the
Cryptomatte layers are directly loaded (the type of pass is determined by an
enum). This allows the node to automatically detect all relevant passes.
Then, when using the eyedropper tool, the operator looks up the selected
coordinates from the picked Image, Node backdrop or Clip and reads the picked
object directly from the Renderlayer/Image, therefore allowing to pick in any
context (e.g. by clicking on the Combined pass in the Image Viewer). The
sampled color is looked up in the metadata and the actual name is stored
in the cryptomatte node. This also allows to remove a hash by just removing
the name from the matte id.
Technically there is some loss of flexibility because the Cryptomatte pass
inputs can no longer be connected to other nodes, but since any compositing
done on them is likely to break the Cryptomatte system anyways, this isn't
really a concern in practise.
In the future, this would also allow to automatically translate values to names
by looking up the value in the associated metadata of the input, or to get a
better visualization of overlapping areas in the Pick output since we could
blend colors now that the output doesn't have to contain the exact value.
Idea + Original patch: Lucas Stockner
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D3959
|
|
|
|
|
|
When painting in the image editor on data images (Non-color, Raw) the
color mismatched between the sampled color and the actual effect that
the painting has on the image. The root cause is that the sampling is
color managed, but the painting still uses a fixed color management
pipeline with a lot of assumptions. Due to recent changes the drawing
of the image editor is color managed, but the painting isn't what made
these changes show up.
This patch is a work-a-round so that the sampled colors and the effect
the paint has on the texture matches. This isn't the correct solution
as that would be to migrate all the painting tools to use proper color
management.
Reviewed By: Pablo Dobarro
Differential Revision: https://developer.blender.org/D9411
|
|
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
Clang Tidy reported a couple of false positives. I disabled
those `NOLINTNEXTLINE`.
Differential Revision: https://developer.blender.org/D8199
|
|
|
|
Also pass some args as 'const'.
|
|
When using the image editor the display channels attribute can become
invalid when selecting another image/buffer. This patch will check what
display channels are valid and when an invalid channel is selected it
will fall back to the color channel.
To de-duplicate the code it also introduces a
`ED_space_image_get_display_channel_mask` function that will determine
the valid bitflags for the display channel of a given `ImBuf`.
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
Part of https://developer.blender.org/T74429.
There's a chance that this causes some issues becaue in some cases we
change from getting the window from context to getting it from somewhere
else.
|
|
|
|
|
|
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
|
|
D5932 by @a.monti with edits
|
|
|
|
This adds a new dialog that is shown whenever a file is closed.
So, either when a new file is opened, or when Blender quits.
The dialog allows to save unsaved changes. Furthermore it also
allows saving images that have been modified in Blender, but are
not saved yet.
Known limitations:
* Images that have no file path and have not been packed before,
are not saved.
* On MacOS the old dialog is shown when Blender quits.
Reviewers: brecht, billreynish
Differential Revision: https://developer.blender.org/D4860
|
|
Support showing warning messages before saving for cases that we can detect
in advance, to be used by quit dialog.
|
|
We will use this for saving images along with the .blend file.
Ref D4861
|
|
In 2.7x UV sculpt was a kind of sub-mode
(a toggle with it's own key-map & drawing code).
Move this to an operator that uses the tool-system,
this simplifies internal logic, especially brush selection
which now matches sculpt and other paint modes.
- Remove toggle used to enable uv sculpt.
- Expose the brush, which was already used but there was no way to
select different brushes.
- Make UV sculpt use paint paint tool slots
(using brushes how all other paint mode currently do).
- Move UV Sculpt keymap to the tools keymap.
- Remove Q to toggle UV sculpt mode,
S/P/G keys to switch tools.
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
When manually selecting a different image, this image will become pinned and
continue to show. The material node is not automatically modified as it was in
old Blender versions, only the image displayed in the UV editor.
Fixes T61239: confusing behavior when unwrapping non-square images. By showing
the relevant image by default it's more clear why it does aspect correction.
|
|
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Done using:
source/tools/utils_maintenance/c_sort_blocks.py
|
|
|
|
|
|
|
|
|
|
Conflicts:
source/blender/blenkernel/BKE_mesh.h
source/blender/blenkernel/intern/mesh_convert.c
source/blender/editors/interface/interface_eyedropper_color.c
source/blender/editors/object/object_add.c
source/blender/editors/space_image/image_ops.c
source/blender/makesrna/intern/rna_image.c
source/blender/windowmanager/intern/wm_draw.c
|
|
Conflicts:
intern/cycles/blender/blender_object.cpp
source/blender/alembic/intern/abc_exporter.cc
source/blender/alembic/intern/abc_mball.cc
source/blender/alembic/intern/abc_mball.h
source/blender/blenkernel/BKE_anim.h
source/blender/blenkernel/BKE_displist.h
source/blender/blenkernel/BKE_dynamicpaint.h
source/blender/blenkernel/BKE_group.h
source/blender/blenkernel/BKE_mball.h
source/blender/blenkernel/BKE_mball_tessellate.h
source/blender/blenkernel/BKE_object.h
source/blender/blenkernel/BKE_scene.h
source/blender/blenkernel/intern/anim.c
source/blender/blenkernel/intern/depsgraph.c
source/blender/blenkernel/intern/displist.c
source/blender/blenkernel/intern/dynamicpaint.c
source/blender/blenkernel/intern/group.c
source/blender/blenkernel/intern/mball.c
source/blender/blenkernel/intern/mball_tessellate.c
source/blender/blenkernel/intern/mesh_convert.c
source/blender/blenkernel/intern/object.c
source/blender/blenkernel/intern/object_dupli.c
source/blender/blenkernel/intern/object_update.c
source/blender/blenkernel/intern/pointcache.c
source/blender/blenkernel/intern/scene.c
source/blender/blenkernel/intern/smoke.c
source/blender/depsgraph/intern/builder/deg_builder_nodes.cc
source/blender/depsgraph/intern/builder/deg_builder_relations.cc
source/blender/editors/include/ED_object.h
source/blender/editors/object/object_add.c
source/blender/editors/object/object_edit.c
source/blender/editors/object/object_modifier.c
source/blender/editors/physics/dynamicpaint_ops.c
source/blender/editors/sculpt_paint/paint_vertex.c
source/blender/editors/sculpt_paint/sculpt_uv.c
source/blender/editors/space_view3d/drawobject.c
source/blender/editors/space_view3d/view3d_draw.c
source/blender/editors/transform/transform_conversions.c
source/blender/editors/transform/transform_snap_object.c
source/blender/editors/util/ed_util.c
source/blender/gpu/intern/gpu_material.c
source/blender/makesrna/intern/rna_meta.c
source/blender/makesrna/intern/rna_object_api.c
source/blender/modifiers/intern/MOD_dynamicpaint.c
source/blenderplayer/bad_level_call_stubs/stubs.c
|
|
|
