Age | Commit message (Collapse) | Author |
|
These operators shouldn't be available in the Asset Browser.
https://developer.blender.org/T83556
Added a comment to each operator poll assignment to explicitly mention
the intention. That should also remind devs to decide if the operator
should apply for both file & asset browsing when copy & pasting operator
definition code.
|
|
This patch adds support for filtering rows based on rules and values.
Filters will work for any attribute data source, they are a property
of the spreadsheet rather than of the attribute system. The properties
displayed in the row filter can depend on data type of the currently
visible column with that name. If the name is no longer visible, the
row filter filter is grayed out, but it will remember the value until
a column with its name is visible again.
Note: The comments in `screen.c` combined with tagging the sidebar
for redraw after the main region point to a lack of understanding
or technical debt, that is a point to improve in the future.
**Future Improvements**
* T89272: A search menu for visible columns when adding a new filter.
* T89273: Possibly a "Range" operation.
Differential Revision: https://developer.blender.org/D10959
|
|
Mainly:
* Make `ED_operator_object_active_editable_ex` properly report poll
messages on failure.
* Add `ED_operator_object_active_local_editable_posemode_exclusive` for
bone constraints requiring pure local Object (non-override one).
* General cleanup and adding more poll messages on failures.
|
|
Creating a new full screen area had it's area initialized as empty,
updating the screen then set the area to a 3D view (as a fallback),
before the actual area type was set.
This made setting the intended space-type run the 3D views exit callback
on a 3D view without a View3D struct allocated, which the exit callback
needed to account for.
Resolve by calling ED_screen_change after the area type has been set.
|
|
The term direction was used in 3 different ways in screen editing code,
making it hard to follow:
- 0-3 for as magic numbers mapped to [west,north,east,south].
- `h`, `v` characters for [horizontal,vertical] axes.
- Cycle direction SPACE_CONTEXT_CYCLE_PREV, SPACE_CONTEXT_CYCLE_NEXT
The following changes have been made:
- Add `eScreenDir` for [west,north,east,south], use variable name `dir`.
- Add `eScreenAxis` for [horizontal,vertical] values, use variable name
`dir_axis`.
- Add `eScreenCycle` for existing enum `SPACE_CONTEXT_CYCLE_{PREV/NEXT}`.
- Add macros `SCREEN_DIR_IS_VERTICAL(dir)`,
`SCREEN_DIR_IS_HORIZONTAL(dir)`.
Replacing `ELEM(dir, 1, 3)`, `ELEM(dir, 0, 2)`.
- Move `ED_screen_draw_join_highlight`, `ED_screen_draw_split_preview`
to `screen_intern.h`.
Reviewed By: Severin
Ref D11245
|
|
|
|
|
|
In some cases functions were defined with arguments of different array
lengths in headers vs. implementations. This commit fixes some of the
cases I ran into, but probably not all of them.
|
|
Corner action zones allow joining any neighbors. New 'Area Close' operator. Improved Header Context Menu.
Differential Revision: https://developer.blender.org/D8084
Reviewed by Campbell Barton
|
|
|
|
Move some drawing code from `area.c` and `ed_util.c` into `ed_draw.c`.
This is to support the new generic slider that wil be used in T81785.
No functional changes.
Reviewed By: #animation_rigging, #user_interface, Severin, sybren
Maniphest Tasks: T81785
Differential Revision: https://developer.blender.org/D9313
|
|
|
|
These functions with many arguments can be unwieldy. Aside from the obvious issues
with rewriting the list of arguments and the opportunities for error and frustration
that presents, the long list of arguments make these systems hard to change. So when
an argument should be added, someone might skip that and add some hack instead.
So, as proposed in T73586#1037210, this patch instead uses a "params" struct for
each of these callbacks.
- Use param argument for `ARegionType.listener`
- Remove unused window field in region listener
- Use param argument for `SpaceType.listener`
- Use params struct for `ARegionType.message_subscribe`
Differential Revision: https://developer.blender.org/D9750
|
|
If Preferences > Interface > Temporary Editors > File Browser is set to
"Maximized Area", opening a File Browser from a File or Asset Browser as
regular editor would cause some issues. For example after closing the
temporary File Browser, the regular browser would take over the file
path and display settings from the temporary one. This is because they
used to share the same area data.
Some similar issues may have happend with temporary image editors.
Now, this commit finally separates the space data of temporary maximized
editors from the regular ones. So the editor data is entirely
independent now, as it should be.
|
|
When outliner datablocks are selected, switch to the corresponding tab
for that datablock in properties editors. Only properties editors
that share an edge with the outliner will change tabs.
Additionally, when modifiers, constraints, and shader effects are
selected from the outliner, the panel will be expanded in all properties
editors.
Part of T77408
Manifest Task: https://developer.blender.org/T63991
Differential Revision: https://developer.blender.org/D8638
|
|
This patch enables property search for all tabs in the property editor.
To make interaction faster, if the editor's current tab doesn't have a
result, the current tab changes to the next tab that has a match.
This patch implements basic code that only searches panels.
While we could run the existing "single tab" property search for every
tab, that would also do everything else related to the layout pass,
which would be less efficient, and maybe more complicated to maintain.
The search match status for every current tab of the property editor is
stored in a runtime bitfield and them displayed later by dimming icons
in the tab selector panel to the left. Using `BLI_bitmap` properly in
the runtime struct required moving it to `buttons_intern.h` and
adding a small API to access the search filter instead.
To make sure the editor isn't influenced by anything that happens while
building the layout for other tabs, most of the context is duplicated
and the new search is run in the duplicated editor.
Note that the tool settings tab works slightly different than the other
tabs, so I've disabled searching it for this commit. That would be a
relatively simple improvement, but would just require a bit of
refactoring of existing code.
Differential Revision: https://developer.blender.org/D8859
|
|
This adds a search bar to the properties editor. The full search for
every tab isn't included in this patch, but the interaction with
panels, searching behavior, UI, region level, and DNA changes are
included here.
The block-level search works by iterating over the block's button
groups and checking whether they match the search. If they do, they
are tagged with a flag, and the block's panel is tagged too. For
every update (text edit), the panel's expansion is set to whether
the panel has a result or not. The search also checks for matching
strings inside enums and in panel labels.
One complication to this that isn't immediately apparent is that
closed panel's subpanels have to be searched too. This adds some
complexity to the area-level panel layout code.
Possible Future Improvements:
- Use the new fuzzy search in BLI
- Reset panels to their expansion before the search started if
the user escape out of the text box.
- Open all child panels of a panel with expansion.
Differential Revision: https://developer.blender.org/D8856
|
|
Support calling this function with an object argument,
useful for implementing filter functions that loop over objects.
|
|
Continuing the work of eb9055a572c3, remove remaining unecessary
variables and arguments that were related tabbing and horizontal
alignment of panels. For example, "vertical" was always true, and
removing that exposed other unused variables.
|
|
|
|
Checks for header alignment didn't account for tool-header & header
having different alignment.
There is no reason to use a lookup function on the area
(ED_area_header_alignment) as we already have region.
Check the regions alignment directly, remove access functions.
|
|
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
When switching workspaces we need to have an unused screen layout that
we can activate. The other window now showed the only available screen
layout in fullscreen though.
Usually when there's no unused screen layout we duplicate an existing
one, but that code didn't respect the fullscreen case properly.
This also tries to clean up the logic a bit, but things are still rather
complicated to follow.
Changes in this code are always risky. Of course things worked fine in
my tests, but I wouldn't be surprised if something breaks.
|
|
The abbreviation 'init' is brief, unambiguous and already used
in thousands of places, also initialize is often accidentally
written with British spelling.
|
|
This reverts commit 03c8b048a166584a72ceff08432401cd7047648c.
This commit re-introduced T76837.
While there is a comment explaining why this function is needed,
the naming of the poll function does make this confusing.
The API could be changed to avoid confusion here.
|
|
overrides.
This is long work, we are still likely missing a lot of cases...
|
|
|
|
Re-apply changes from 54ea3562406c633dc69f59697cca3cd1cded3bcd,
with a poll function that uses the same active object as the operator,
matching other mode switching functions.
|
|
|
|
Part of T74432.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
Follow up of b2ee1770d4c3 and 10c2254d412d, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
Continuation of b2ee1770d4c3, now non-single word variables are also
renamed.
Part of T74432.
Also ran clang-format on affected files.
|
|
Reviewers: brecht, Severin
Differential Revision: https://developer.blender.org/D7024
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
|
|
|
|
|
|
Old name was a bit confusing/misleading, esp. since previous commit.
|
|
NOTE: This change shouldn't have any visible effect. It's just the
first (easiest) step towards decoupling gizmo redraws from viewport
redraws.
We currently redraw the entire region whenever a gizmo needs redrawing,
which would be nice to avoid in the future, see T73198. The first step
towards this would be having a separate tag for them, which is what
this patch implements.
The term "editor-overlays" was chosen because for the forseeable future,
we'll also have to redraw non-gizmo overlays in-between drawing 3D and
2D gizmos. Namely annotations.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6838
|
|
This function is a very special refresh function just for floating
regions. _initialize is more consistent with ED_area_initialize() so use
that too.
Also adds assert.
|
|
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
|
|
flipped to bottom
While flipping the header to bottom works in the MCE (because MCE doesnt
allow overlapping UI) we need to take the regions visible rect into
account for the Image Editor.
Also correct clickable scubbing area (poll for frame_change) in the
Image Editor and the MovieClip Editor not taking UI_DPI_FAC into
account.
Maniphest Tasks: T70905
Differential Revision: https://developer.blender.org/D6090
|
|
For many users, this will make the File Browser window behave more like
what they would expect. It addresses the issue of the File Browser
becoming hidden behind the main window by clicking anywhere in the
latter. It communicates the interruptive, but temporary nature of the
operation a bit better.
Further, on tiling window managers the File Browser now opens as
floating by default, like in other applications.
Note that this also makes sure the File Browser is always opened as
separate window, so it doesn't re-use the Preferences, or any other
temporary window anymore. This seems to have been a common annoyance.
More concretely, this makes the File Browser window behave as follows:
* Stays on top of its parent Blender window, but not on top of
non-Blender windows.
* Minimizes with its parent window
* Can be moved independently
* Doesn't add an own item in task bars
* Doesn't block other Blender windows (we may want to have this though)
* Opens as floating window for tiling window managers (e.g. i3wm/Sway)
Further notes:
* When opening a file browser from the Preference window (or any
temporary window), the main window, as the file browsers parent is
moved on top of the Preferences, which makes it seem like the
Preferences were closed. This is the general issue of bad secondary
window handling as window activation changes. I made it so that the
window is moved back once the file browser is closed.
This behavior is confusing and would be nice to avoid. It's a separate
issue though.
* On most window managers on Linux the temporary window can not be
minimized and maximized, they disable that for dialog windows.
* On Windows and macOS, only minimizing is disabled, as there is no
decent way yet to restore a window if it's not shown in the taskbar.
Reviewed By: Brecht van Lommel, Campbell Barton, William Reynish
Edits and macOS implementation by Brecht.
Differential Revision: https://developer.blender.org/D5810
Part of T69652.
|
|
|
|
Will be put to use in followup commits.
|
|
|
|
Avoids calculating the visible part of a region whenever
on-screen overlays are drawn.
|
|
When a mesh is pinned in the properties panel, Blender crashes when you
click the "Add Custom Split Normals Data".
The code calls `ob = ED_object_context(C)` which returns NULL when the
mesh is pinned in the properties panel, causing a segfault when trying
to get the mesh via `ob->data`.
A new function `ED_mesh_context(C)` avoids this by first checking
whether a mesh was pinned in the context. If not, it checks the pinned
object's data. If that's not there, or it's not a mesh, it returns the
active object's mesh. Finally it returns NULL if there is no active
object, or if the active object is not a mesh object.
Reviewed By: brecht, mont29
Differential Revision: https://developer.blender.org/D5223
|
|
Don't rely on detecting view matrix changes to refresh depth buffer, instead
detect redraw tags coming from progressive render samples.
|