| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
|
|
Also order return matrices last.
|
|
Also order return matrices last.
|
|
This also remove some non functionnal state changes that were left
from legacy code.
|
|
Clang Tidy reported a couple of false positives. I disabled
those `NOLINTNEXTLINE`.
Differential Revision: https://developer.blender.org/D8199
|
|
The was caused by 8b347fc2cdc67 as the old BONESEL_NOSEL flag
handled the -1 case (used for none).
Instead of checking for -1, remove these elements from the array
as selection code makes decisions based on the number of hits detected.
|
|
|
|
When editing a complex curve is very annoying to have all handles at a time. Also, this is a requirement for the current GSoC Edit Grease Pencil using curves.
I have seen that this improvement can be used in any other area of blender, so I have decided to publish the option in the overlay panel..
Reviewed By: fclem, #user_interface, billreynish, Severin
Differential Revision: https://developer.blender.org/D7754
|
|
Due to recent changes clicks in the node editor would trigger a
depsgraph update resulting in too many redraws. This patch limits
the updates to when workbench shown in texture mode in any visible
screen.
There are still cases where too many updates are created. For example when
there are a Cycles render viewport and a Workbench texture viewport on the
same screen.
This fix is meant as a workaround. The actual fix should add a mechanism
to the depsgraph and the viewports should check if they need to be redrawn.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7830
|
|
Follow up of b2ee1770d4c3 and 10c2254d412d, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
Continuation of b2ee1770d4c3, now non-single word variables are also
renamed.
Part of T74432.
Also ran clang-format on affected files.
|
|
Also pass some args as 'const'.
|
|
NOTE: While most of the milestone 1 goals are there, a few smaller features and
improvements are still to be done.
Big picture of this milestone: Initial, OpenXR-based virtual reality support
for users and foundation for advanced use cases.
Maniphest Task: https://developer.blender.org/T71347
The tasks contains more information about this milestone.
To be clear: This is not a feature rich VR implementation, it's focused on the
initial scene inspection use case. We intentionally focused on that, further
features like controller support are part of the next milestone.
- How to use?
Instructions on how to use this are here:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/How_to_Test
These will be updated and moved to a more official place (likely the manual) soon.
Currently Windows Mixed Reality and Oculus devices are usable. Valve/HTC
headsets don't support the OpenXR standard yet and hence, do not work with this
implementation.
---------------
This is the C-side implementation of the features added for initial VR
support as per milestone 1. A "VR Scene Inspection" Add-on will be
committed separately, to expose the VR functionality in the UI. It also
adds some further features for milestone 1, namely a landmarking system
(stored view locations in the VR space)
Main additions/features:
* Support for rendering viewports to an HMD, with good performance.
* Option to sync the VR view perspective with a fully interactive,
regular 3D View (VR-Mirror).
* Option to disable positional tracking. Keeps the current position (calculated
based on the VR eye center pose) when enabled while a VR session is running.
* Some regular viewport settings for the VR view
* RNA/Python-API to query and set VR session state information.
* WM-XR: Layer tying Ghost-XR to the Blender specific APIs/data
* wmSurface API: drawable, non-window container (manages Ghost-OpenGL and GPU
context)
* DNA/RNA for management of VR session settings
* `--debug-xr` and `--debug-xr-time` commandline options
* Utility batch & config file for using the Oculus runtime on Windows.
* Most VR data is runtime only. The exception is user settings which are saved
to files (`XrSessionSettings`).
* VR support can be disabled through the `WITH_XR_OPENXR` compiler flag.
For architecture and code documentation, see
https://wiki.blender.org/wiki/Source/Interface/XR.
---------------
A few thank you's:
* A huge shoutout to Ray Molenkamp for his help during the project - it would
have not been that successful without him!
* Sebastian Koenig and Simeon Conzendorf for testing and feedback!
* The reviewers, especially Brecht Van Lommel!
* Dalai Felinto for pushing and managing me to get this done ;)
* The OpenXR working group for providing an open standard. I think we're the
first bigger application to adopt OpenXR. Congratulations to them and
ourselves :)
This project started as a Google Summer of Code 2019 project - "Core Support of
Virtual Reality Headsets through OpenXR" (see
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/).
Some further information, including ideas for further improvements can be found
in the final GSoC report:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/Final_Report
Differential Revisions: D6193, D7098
Reviewed by: Brecht Van Lommel, Jeroen Bakker
|
|
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
Motivation the functions get 3 different kind of flag parameters (ImBuf,
DrawType, OffscreenRendering) the naming of the flags were not clear,
leading to mistakes and unnecessary time spend debugging.
|
|
|
|
Previously any of the named views could not have any roll,
this commit supports roll as long as it's axis-aligned (90,180,270 deg).
This is useful for snapping to views,
an improvement on cebd025e02f11.
|
|
This makes auto-perspective work as expected
when orbiting out of a snapped view.
|
|
- Replace 'unsigned' used on it's own with 'uint'.
- Replace 'unsigned const char' with 'const uchar'.
|
|
Multisample buffers were used for smooth line drawing. As we now have
an algorithm that doesn't need the multisample buffers we can remove
them.
The user preference for viewport multi_sampling is replaced by single
toggle overlay `use_overlay_smooth_wire`. By default this setting is
enabled as the new drawing is really quick (<1ms) and uses zero hacks.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6367
|
|
|
|
Particularly noticeable when vertex painting with a subsurf modifier.
In some cases every sculpt or paint stroke step would evaluate the dependency
graph. This should only happen for redraws. Now more selectively choose if the
dependency graph should be evaluated to initialize the view context. Doing it
in the view context evaluation is somewhat hidden, now it's more explicit.
Differential Revision: https://developer.blender.org/D5844
|
|
Support per-viewport collection visibility options.
Note 1: There is no way to show a collection that was not visible before
due to depsgraph. Otherwise we would risk having all the collections in
the depsgraph and I believe this is not the idea.
An alternative would be to have a new depsgraph for viewports that are
not local. Something to keep in mind if we do per-viewport current frame
in the future.
So for now what we do is to only allow collections visibility to be
disabled/hidden in this mode.
Note 2: hide_viewport (the eye icon) doesn't really matter for
depsgraph. So after the merge we can still ignore it to show the
collections locally in a viewport with no problems for the depsgraph.
Reviewers: brecht, sergey
Subscribers: billreynish
Related task: T61327
Differential Revision: https://developer.blender.org/D5611
|
|
|
|
This is a step to finish the D4325 and fix the T61286.
Currently the grid is highlighted in steps of 10 out of 10, which is wrong for the imperial units as seen in `buImperialLenDef`.
The idea of the code is to pass the steps of the grid already dimensioned as a uniform.
Another important thing to note is that subdivisions now only affect the grid without unity.
This matches the 2.7x Blender versions.
No performance loss (almost no gain too).
Reviewers: fclem
Subscribers: zlsa, rl.amorato
Differential Revision: https://developer.blender.org/D4379
|
|
`ED_view3d_select_id_read_rect` serves only as a bridge to `DRW_framebuffer_select_id_read`.
Keeping these codes similar only increases the complexity of some functions.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D5415
|
|
Avoids having to do projection/offset calculations inline.
|
|
It is very similar to `ED_view3d_select_id_read_rect`.
|
|
|
|
T68045 by @luzpaz
|
|
This change ensures that operators which needs access to evaluated data
first makes sure there is a dependency graph.
Other accesses to the dependency graph made it more explicit about
whether they just need a valid dependency graph pointer or whether they
expect the graph to be already evaluated.
This replaces OPTYPE_USE_EVAL_DATA which is now removed.
Some general rules about usage of accessors:
- Drawing is expected to happen from a fully evaluated dependency graph.
There is now a function to access it, which will in the future control
that dependency graph is actually evaluated.
This check is not yet done because there are some things to be taken
care about first: for example, post-update hooks might leave scene in
a state where something is still tagged for update.
- All operators which needs to access evaluated state must use
CTX_data_ensure_evaluated_depsgraph().
This function replaces OPTYPE_USE_EVAL_DATA.
The call is generally to be done in the very beginning of the
operator, prior other logic (unless this is some comprehensive
operator which might or might not need access to an evaluated state).
This call is never to be used from a loop.
If some utility function requires evaluated state of dependency graph
the graph is to be passed as an explicit argument. This way it is
clear that no evaluation happens in a loop or something like this.
- All cases which needs to know dependency graph pointer, but which
doesn't want to actually evaluate it can use old-style function
CTX_data_depsgraph_pointer(), assuming that underlying code will
ensure dependency graph is evaluated prior to accessing it.
- The new functions are replacing OPTYPE_USE_EVAL_DATA, so now it is
explicit and local about where dependency graph is being ensured.
This commit also contains some fixes of wrong usage of evaluation
functions on original objects. Ideally should be split out, but in
reality with all the APIs being renamed is quite tricky.
Fixes T67454: Blender crash on rapid undo and select
Speculation here is that sometimes undo and selection operators are
sometimes handled in the same event loop iteration, which leaves
non-evaluated dependency graph.
Fixes T67973: Crash on Fix Deforms operator
Fixes T67902: Crash when undo a loop cut
Reviewers: brecht
Reviewed By: brecht
Subscribers: lichtwerk
Maniphest Tasks: T67454
Differential Revision: https://developer.blender.org/D5343
|
|
This commit moves the API of selecting faces, vertices and edges to a DRW manager engine.
Reviewers: campbellbarton, fclem
Subscribers: jbakker, brecht
Differential Revision: https://developer.blender.org/D5090
|
|
|
|
view3d.
This solution checks if `persp_mat` has changed. If positive, the selection buffer is redrawn.
Differential Revision: https://developer.blender.org/D5081
|
|
This patch does not bring functional changes, but it is a good change if we want to use these utilities in areas other than those using BMesh (eg painting editors).
This is also a step to replace `ED_view3d_select_id_validate`. That function erroneously checks `V3D_INVALID_BACKBUF` which causes it to update unnecessarily.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D5072
|
|
Revert part of d56c0a0a6affcdfd7335c
|
|
When rendering viewport to an offscreen buffer the buffer was
constructed for non anti aliasing (0 samples). This made the objects
that are drawn by the `object_mode` including `wireframe` draw type
non-anti-aliased.
The offscreen buffers will be constructed based on the user setting for
viewport multisampling (`U.ogl_multisamples`). The same setting will
also be used when previewing scene strips in the sequencer. For now
this only improves wireframe drawing in the scene strips. To improve the
Anti aliasing in the scene strips we need to get finer control in the
draw manager. This will be part of a different patch I am preparing.
Please note that this patch also cleansup some unused code in the offscreen rendering (FSAA code was still existing, but never called)
Reviewed By: brecht
Maniphest Tasks: T64849
Differential Revision: https://developer.blender.org/D4907
|
|
When doing offscreen rendering (Viewport Render or Sequencer Scene
strip) EEVEE and workbench used the wrong window coordinates. These
coordinates included the border that was not drawn.
Reviewed By: brecht
Maniphest Tasks: T64505
Differential Revision: https://developer.blender.org/D4864
|
|
|
|
|
|
The previous fix 8a6414ed46f66, resolved selection picking but didn't
work for box/circle/lasso select.
- Add ED_select_buffer_utils.h for general select-buffer operations
unrelated to edit-mesh.
- Circle select still needs to cache select-id's for each update.
|
|
|
|
There is now a checkbox to enable/disable depth of field per camera. For Eevee
this replace the scene level setting. For Cycles there is now only an F-Stop
value, no longer a Radius.
Existing files are converted based on Cycles or Eevee being set in the scene.
Differential Revision: https://developer.blender.org/D4882
|
|
Avoids having to check rotation modes to get the orientation.
|
|
Internally tool settings have been moved to the 3D view.
Added the ability for to draw panels from another space/region
so they can be mirrored in the properties editor.
|
|
- Merged SEQ_OFSDRAW with V3D_OFSDRAW and define in the
DNA_view3d_types: Due to this FSAA always kicked in making the
rendering slow.
- Removed `Texture Solid` and `DOF`.
- Now when chosing Solid rendering the settings
of the original scene is used.
- Added a global override to use scene specific shading. In the
Future we will need to enhanced this so user can change the
settings.
- Added support for LookDev. LookDev crashed as it needed the
`evil_C` what was not set
- LookDev mode will always show the scene + world lights.
Reviewed By: brecht, fclem
Maniphest Tasks: T62517
Differential Revision: https://developer.blender.org/D4738
|
|
The problem occurs because status changes between BackBuffer and Offscreen.
Reviewers: fclem
Differential Revision: https://developer.blender.org/D4703
|
