Age | Commit message (Collapse) | Author |
|
Starts scrolling when dragging a node or node link and going outside the current window.
Largely copied from the VIEW2D_OT_edge_pan operator.
Edge panning operator customdata and supporting functions now in
UI_view2d.h, so they could be used by operators in other editor
libraries. The VIEW2D_OT_edge_pan operator also uses this customdata and
shared functions now. Operators properties can be used to configure
edge panning margins and speed for each use case, rather than using
hardcoded values.
The speed function for edge panning has been tweaked somewhat:
* "Speed per pixel" has been replaced with a "speed ramp" distance.
This is more intuitive and also creates an upper bound for the speed,
which can otherwise become extreme with large cursor distance.
* "Max speed" is reached at the end of the speed ramp.
* Padding the region inside and outside is applied as before, but both
values are operator properties now.
Node transform operator also supports edge panning. This requires
an offset for changes in the view2d rect, otherwise nodes are "stuck"
to the original view.
Transform operator had cursor wrapping categorically enabled, but this
gets quite confusing with the edge scrolling mechanism. A new TransInfo
option T_NO_CURSOR_WRAP has been introduced to disable this behavior.
The double negative is a bit annoying, but want to avoid affecting the
existing transform modes, so by default it should still set the
OP_IS_MODAL_GRAB_CURSOR flag (which then sets the WM_CURSOR_WRAP_XY
flag during modal execution).
Reviewed By: HooglyBoogly, JacquesLucke
Differential Revision: https://developer.blender.org/D11073
|
|
In the current implementation, cryptomatte passes are connected to the node
and elements are picked by using the eyedropper tool on a special pick channel.
This design has two disadvantages - both connecting all passes individually
and always having to switch to the picker channel are tedious.
With the new design, the user selects the RenderLayer or Image from which the
Cryptomatte layers are directly loaded (the type of pass is determined by an
enum). This allows the node to automatically detect all relevant passes.
Then, when using the eyedropper tool, the operator looks up the selected
coordinates from the picked Image, Node backdrop or Clip and reads the picked
object directly from the Renderlayer/Image, therefore allowing to pick in any
context (e.g. by clicking on the Combined pass in the Image Viewer). The
sampled color is looked up in the metadata and the actual name is stored
in the cryptomatte node. This also allows to remove a hash by just removing
the name from the matte id.
Technically there is some loss of flexibility because the Cryptomatte pass
inputs can no longer be connected to other nodes, but since any compositing
done on them is likely to break the Cryptomatte system anyways, this isn't
really a concern in practise.
In the future, this would also allow to automatically translate values to names
by looking up the value in the associated metadata of the input, or to get a
better visualization of overlapping areas in the Pick output since we could
blend colors now that the output doesn't have to contain the exact value.
Idea + Original patch: Lucas Stockner
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D3959
|
|
Missed moving the defines in CMake for e255040c7797
causing cycles not to be enabled.
|
|
For a future patch (D9006) we need these groups for longer than just the
the layout process, in order to differentiate buttons in panel headers.
It may also be helpful in the future to have a way to access related
buttons added in the same uiLayout.prop call. With this commit, the
groups are stored in and destructed with the uiBlock.
|
|
|
|
|
|
Support undo/redo when editing text buttons.
|
|
|
|
This patch is only for the eyedropper to create materials.
Options:
Click: Create Stroke Material
Shift+Click: Create Fill Material.
Shift+Ctrl+Click: Create Stroke and Fill Material.
Toolbar:
{F7718606}
Reviewed By: brecht, mendio
Differential Revision: https://developer.blender.org/D5688
|
|
|
|
This affects the timeline, dopesheet, graph editor, sequencer,
clip editor and nla editor.
Removed structs and enums: `V2D_ARG_DUMMY`, `eView2D_Units`,
`eView2D_Clamp`, `eView2D_Gridlines`, `View2DGrid`.
A main goal of this refactor is to get rid of the very generic
`View2DGrid` struct. The drawing code became very complex
because there were many different combinations of settings.
This refactor implements a different approach.
Instead of one very generic API, there are many slighly
different functions that do exactly, what we need in the
different editors. Only very little code is duplicated,
because the API functions compose some shared low level code.
This structure makes the code much easier to debug and change,
because every function has much fewer responsibilities.
Additionally, this refactor fixes some long standing bugs.
E.g. when `Show Seconds` is enabled, you zoom in and pan the view.
Or that the step size between displayed frame numbers was
always `>= 2`, no matter how close you zoom in.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D4776
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
Tested to work on Linux and macOS.
This will be enabled once all platforms are verified.
See D4684
|
|
No functional change, this adds LIB definition and args to cmake files.
Without this it's difficult to migrate away from 'BLENDER_SORTED_LIBS'
since there are many platforms/configurations that could break when
changing linking order.
Manually add and enable WITHOUT_SORTED_LIBS to try building
without sorted libs (currently fails since all variables are empty).
This check will eventually be removed.
See T46725.
|
|
Following removal from C source code.
See: 8c68ed6df16d8893
|
|
It's more convenient to keep version patching in the same place,
this also splits out some function calls from version patching
and supports updating UserDef structs besides the 'U'l global.
|
|
Use for drawing modal operator header keys.
|
|
|
|
Interface files are increasingly mixing up too much functionality,
add a file only to handle queries.
More functions can be moved/added here.
|
|
|
|
|
|
This is the first step to moving redo out of the top-bar, see: T55039
- Support for floating panels in the ScrArea has been added.
- A new region type RGN_TYPE_HUD is used for floating settings input.
- Only one HUD should be visible at a time.
- Currently HUD regions are only visible
for 3D view and image space types.
- There are currently some remaining glitches with hide/show
that need further investigation.
|
|
|
|
- UILayout.popover(.. panel_type ..)
A single panel
- UILayout.popover_group(.. panel categories ..)
Expands all panels matching args.
Currently used in the topbar for redo and paint options.
|
|
|
|
|
|
|
|
|
|
|
|
Each handles separate data-types and didn't share much logic,
better put each in it's own file.
|
|
|
|
Each region type is quite separate and file was getting too big.
|
|
BKE_depsgraph.h
This removes BKE_depsgraph.h and depsgraph.c
|
|
This new code fixes a tons of issues with previous one, which basically was epic-failing
in many non-basic cases (especially mixed columns and rows with column-dominant layout).
It basically no more relies over order of buttons declaration in the uiBlock, instead it
finds and stores spatial neighbors and uses that data to compute needed stitching.
See code comments for details.
New code seems to be roughly ten times slower than old one (for complex grouped layouts),
that is, about a few microsecconds per alignment group - this remains reasonable.
Also, ui-align code becomming rather big in itself, it was separated in
own new `interface_align.c` file.
Reviewers: campbellbarton, severin
Reviewed By: campbellbarton, severin
Differential Revision: https://developer.blender.org/D1573
|
|
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
|
|
Original patch by @random (D765) with some minor work done by @campbell
and me.
At this place, I'd like call out a number of people who were involved and
deserve a big "Thank you!":
* At the first place @randon who developed and submitted the patch
* The Blendercn community which helped a lot with testing - espacially
* @yuzukyo, @leon_cheung and @kjym3
* @campbellbarton, @mont29 and @sergey for their help and advises during
* review
* @ton who realized the importance of this early on and asked me for
* reviewing
We are still not finished, as this is only the first part of the
implementaion, but there's more to come!
|
|
https://developer.blender.org/D643
Separates graphics context creation from window code in Ghost so that they can vary separately.
|
|
interface_ops.c
|
|
remove MEM_sys_types.h which was a duplicate.
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
also rename backface_culling --> use_backface_culling (which is used elsewhere in rna)
|
|
|
|
|
|
blender_add_lib now takes a separate include argument to suppress warnings in system includes (mostly ffmpeg & python).
also only build wm_apple.c on apple+carbon configuration.
|
|
generator work with mingw again
|
|
The butterfly wing flap, causing a nice storm in the rest of blender.
Now all dependencies should point ok again. CMakers, do double-test.
|
|
|
|
and endif() which is no longer needed.
|
|
reporting missing headers & C files.
this is important so IDE's using CMake integration always get blender headers. - QtCreator & MSVC for eg, probably others too.
|