| Age | Commit message (Collapse) | Author |
|---|
|
Ref T92709
|
|
A typical issue with popup handling: We have to respect the menu-region
and give it priority over the regular region for handling. In this case
there isn't a regular region in context even.
|
|
This was reported for FCurve modifiers, but was also true (in theory) for
other instanced panels (regular modifiers, spreadsheet filters, ...),
these would not show pinning for other reasons (no caterories).
So in the case of the Graph Editor the follwing happens:
`graph_buttons_register` only registers `GRAPH_PT_modifiers`, the panel
itself has no header (PANEL_TYPE_NO_HEADER), further panels for
individual modifiers are added dynamically in `graph_panel_modifiers`.
So when pinning a particular modifier, we would pin e.g. `GRAPH_PT_noise`
(not `GRAPH_PT_modifiers`).
ED_region_panels_layout_ex would only collect panels known to
`graph_buttons_register` (so is not aware of the specific panels of
modifiers). So while I think it should be possible to pin
`GRAPH_PT_modifiers` on top of an individual modifier's panel this would
result in all modifiers being shown in other categories [which would also
be weird]. Panel header layout was also not correct (drawing the pin
icon over the modifier delete icon).
So to resolve this, just dont use pinning for these type of panels.
part of T92293.
Maniphest Tasks: T92293
Differential Revision: https://developer.blender.org/D12965
|
|
Updates UI code so that we can enable the asset UI for specific data-block
types by default, i.e. irrespective of the "Extended Asset Browser"
experimental feature.
"Mark as Asset" and "Clear Asset" are always visible in the Outliner context
menu now, but are grayed out if not applicable and show a disabled hint in the
tooltip.
A known side-effect of this: The "Mark as Asset" and "Clear Asset" operators
are enabled for action data-blocks now, even though only pose actions created
through the Pose Libraries add-on are supported. If this is something worth
addressing is being discussed still.
Differential Revision: https://developer.blender.org/D12955
Reviewed by: Sybren Stüvel
|
|
This change simplifies the parameter list for these functions
and reduces the chance of typos mixing up array indices.
Reviewed By: campbellbarton
Ref D12950
|
|
Use arrays for wmEvent coordinates, this quiets warnings with GCC11.
- `x, y` -> `xy`.
- `prevx, prevy` -> `prev_xy`.
- `prevclickx, prevclicky` -> `prev_click_xy`.
There is still some cleanup such as using `copy_v2_v2_int()`,
this can be done separately.
Reviewed By: campbellbarton, Severin
Ref D12901
|
|
Tree-view items can now easily define their own context menu. This works
by overriding the `ui::AbstractTreeViewItem::build_context_menu()`
function. See the documentation:
https://wiki.blender.org/wiki/Source/Interface/Views#Context_Menus
Consistently with the Outliner and File Browser, the right-clicked item
also gets activated. This makes sure the correct context is set for the
operators and makes it clear to the user which item is operated on.
An operator to rename the active item is also added, which is something
you'd typically want to put in the context menu as well.
|
|
Assigning a shortcut to bone layers for example,
raised a Python exception when used.
|
|
Only append RNA_path_from_ID_to_struct to context attributes if those
paths resolve to ID types.
Also simplify creating RNA paths by adding utility functions:
- WM_context_path_resolve_property_full
- WM_context_path_resolve_full
Part of fix for T90723.
|
|
|
|
Idea for 3.0 is to disable all functionality that isn't well polished
and focus on those parts first. Starting with poses.
* Adds a new experimental option "Extended Asset Browser", replacing
"Asset Browser".
* Unlike the previous option, this isn't enabled by default anymore.
This didn't work well in practice and caused plenty of confusion.
* "Mark as Asset" and "Clear Asset" are hidden if the option is
disabled.
* Same for the category selection in the Asset Browser.
* Always show display the "Only Assets" option in the File Browser while
browing inside .blend files. That way you can hide data-blocks that
are not pose assets.
* The Asset Library setup UI in the Preferences is always visible now,
it's needed for pose library access.
Addresses T90181, T90180 and T90300.
Differential Revision: https://developer.blender.org/D12120
|
|
I'm trying to move away from general files with lots of things in them,
and instead have many small & focused files. I find that easier to
work with since everything has clear responsibilities, even if there is
some minor overhead in managing all these files.
I also try to differentiate more clearly between public and internal
files. So source files and internal headers are in a `intern/`
sub-directory, public functions are in a number of headers one level
higher.
For convenience and to make this compatible with our existing general
headers in `editors/include`, I made the `ED_asset.h` there include all
these public headers.
This is of course a bit of an experiment, let's see how it works in
practice.
Also corrected the name of `ED_asset_can_make_single_from_context()`.
|
|
Makes it possible to create tooltips for UI list rows, which can be
filled in .py scripts, similar to how they can extend other menus. This
is used by the (to be committed) Pose Library add-on to display pose
operations (selecting bones of a pose, blending a pose, etc).
It's important that the Python scripts check if the UI list is the
correct one by checking the list ID.
For this to work, a new `bpy.context.ui_list` can be checked. For
example, the Pose Library add-on does the following check:
```
def is_pose_asset_view() -> bool:
# Important: Must check context first, or the menu is added for every kind of list.
list = getattr(context, "ui_list", None)
if not list or list.bl_idname != "UI_UL_asset_view" or list.list_id != "pose_assets":
return False
if not context.asset_handle:
return False
return True
```
|
|
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
Widget drawing code already supported drawing right-aligned, grayed out
shortcut strings. This patch generalizes things a bit so this can also
be used to draw other hints in the same way. There have been a few
instances in the past where this would've been useful, D11046 being the
latest one.
Note that besides some manual regression testing, I didn't check if this
works yet, as there is no code actually using it (other than the
shortcuts). Can be checked as part of further development for D11046.
A possible further improvement would be providing a way to define how
clipping should be done. E.g. sometimes the right-aligned text should be
clipped first (because it's just a hint), in other cases it should be
left untouched (like current code explicitly does it for shortcuts).
Removes the `UI_BUT_HAS_SHORTCUT` flag, which isn't needed anymore.
|
|
- Optionally get the error as a single line.
- Support access the error as an allocated string.
- PyC_ExceptionBuffer_Simple was always printing to the `stdout` while
PyC_ExceptionBuffer didn't, now either print to the output.
Without this, callers are unable to do anything with the error string.
|
|
This was added in 37b82a2d260e, doesn't have much purpose and doesn't even do
anything in the vast majority of cases. It only affects custom properties. So
at the very least it shouldn't be shown for regular RNA property buttons. But
even for cases where it may do something, we couldn't find a good use-case. If
this operator has use-cases with some add-ons, the add-ons can expose it
differently, e.g. with a little 'x' icon next to the button, like it's done in
the keymap editor.
So removing the context menu entry now. Should this turn out to be a problem,
it can be brought back but much more selectively (only where it actually does
something). Or we could combine it with "Reset to Default".
Differential Revision: https://developer.blender.org/D8727
Reviewed by: Brecht Van Lommel, Hans Goudey
|
|
This commit adds an operator to the RMB-menu "Copy Full Data Path“,
to copy the full RNA path to the clipboard. It aims to complement
"Copy Data Path“, which only copies the part of the path that is needed
for drivers, but for writing addons, etc. it is useful to have an option that
gives the full data path.
Similar patch have been submitted before, see D763 and D2746
This time I did not split the operator (as D2746) and does not contain the UI reorganization (as D763)
Note, the fixes from D2746 were committed in rB09eac0159db8 so that patch can be closed.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D10539
|
|
|
|
|
|
Partially reverts 2250b5cefee7.
Removing the user count and fake user count icons was controversial (which was
expected) and there are a few further changes needed, that won't make it in
time for the release, see D9946.
While there is a design to bring back the user count and fake user indicators,
a new design idea was proposed that the UI team wants to follow. This came too
late for the 2.92 release, the new design is targeted at the 2.93 release now.
Meanwhile, UI team decision was to simply revert the design changes.
The new design is being worked on in https://developer.blender.org/T84669.
Note that this commit does not revert some internal changes done in
2250b5cefee7. Namely the introduction of `ed_util_ops.c` and data-block
operators in there. These will still be needed in the new design.
|
|
The Asset Browser will be disabled and not available for the 2.92 release. In
alpha/beta builds, there will be an "Asset Browser" option under Preferences >
Experimental, if the developer extras are enabled.
Note that this also disables related UI elements (e.g. "Mark Asset" buttons,
Preferences settings for asset libraries, etc.).
The code is still in master of course, development and testing will continue
there. But there simply needs to be too much polishing and fixing before the
2.92 release, plus there are some design decisions to be reevaluated.
Check the milestone 1 project to follow ongoing work:
https://developer.blender.org/project/view/124/
|
|
|
|
|
|
The previous design is rather old and has a couple of problems:
* Scalability: The current solution of adding little icon buttons next to the
data-block name field doesn't scale well. It only works if there's a small
number of operations. We need to be able to place more items there for better
data-block management. Especially with the introduction of library overrides.
* Discoverability: It's not obvious what some of the icons do. They appear and
disappear, but it's not obvious why some are available at times and others
not.
* Unclear Status: Currently their library status (linked, indirectly linked,
broken link, library override) isn't really clear.
* Unusual behavior: Some of the icon buttons allow Shift or Ctrl clicking to
invoke alternative behaviors. This is not a usual pattern in Blender.
This patch does the following changes:
* Adds a menu to the right of the name button to access all kinds of operations
(create, delete, unlink, user management, library overrides, etc).
* Make good use of the "disabled hint" for tooltips, to explain why buttons are
disabled. The UI team wants to establish this as a good practise.
* Use superimposed icons for duplicate and unlink, rather than extra buttons
(uses less space, looks less distracting and is a nice + consistent design
language).
* Remove fake user and user count button, they are available from the menu now.
* Support tooltips for superimposed icons (committed mouse hover feedback to
master already).
* Slightly increase size of the name button - it was already a bit small
before, and the move from real buttons to superimposed icons reduces usable
space for the name itself.
* More clearly differentiate between duplicate and creating a new data-block.
The latter is only available in the menu.
* Display library status icon on the left (linked, missing library, overridden,
asset)
* Disables "Make Single User" button - in review we weren't sure if there are
good use-cases for it, so better to see if we can remove it.
Note that I do expect some aspects of this design to change still. I think some
changes are problematic, but others disagreed. I will open a feedback thread on
devtalk to see what others think.
Differential Revision: https://developer.blender.org/D8554
Reviewed by: Bastien Montagne
Design discussed and agreed on with the UI team, also see T79959.
|
|
This makes it possible to turn data-blocks into assets and back into normal
data-blocks. A core design decision made for the asset system is that not every
data-block should be an asset, because not every data-block is made for reuse.
Users have to explicitly mark data-blocks as assets.
Exposes "Mark Asset" and "Clear Asset" in Outliner context menus (currently ID
Data submenu) and button context menus. We are still not too happy with the
names, they may change.
This uses the new context members to pass data-blocks to operators, added in
af008f553293 and 0c1d4769235c.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9717
Reviewed by: Brecht Van Lommel
|
|
This is similar to c4a2067130130d, but applies to the general UI and is only
about single data-blocks. Here there was a similar problem: How can buttons
pass the data they represent to operators? We currently resort to ugly ad-hoc
solutions like `UI_context_active_but_get_tab_ID()`. So the operator would need
to know that it is executed on a tab button that represents a data-block.
A single button can now hand operators a data-block to operate on. The operator
can request it via the "id" context member (`CTX_data_pointer_get_type(C, "id",
&RNA_ID)` in C, `bpy.context.id` in .py).
In this commit, it is already set in the following places:
* Generic RNA button code sets it to the pointed to data-block, if the button
represents a data-block RNA pointer property. (I.e for general data-block
search buttons.)
* Data-block selectors (`templateID`) set it to the currently active data-block.
* The material slot UI-List sets it for each slot to the material it represents.
The button context menu code is modified so its operators use the context set
for the layout of its parent button (i.e. `layout.context_pointer_set()`).
No user visible changes. This new design isn't actually used yet. It will be
soon for asset operators.
Reviewed as part of https://developer.blender.org/D9717.
Reviewed by: Brecht Van Lommel
|
|
|
|
Problem introduced in rBadd48c007428.
`UI_but_string_info_get` can change the value of the args.
|
|
|
|
This commit renames 'execute' to 'run' because:
- This follows Python's "PyRun" which these functions wrap.
- Execution functions can use either exec/eval modes,
making naming awkward (for future API refactoring).
|
|
The current on-size-fits-all `uiBut` creates quite a mess, where it's
hard to reason about which members are free for use, under which
conditions they are used and how.
`uiBut` also has members that aren't used at times, violating the "don't
pay for what you don't use" principle.
To address this, we want to move to typed buttons, where `uiBut` is just
a base struct and each type extends it as needed. That structures data
better and type specific data is only available if it's actually used by
a button type.
Two trade-offs:
* Many casts to the derived type have to be done.
* Sometimes we change the button type after it's created. So I had to
add logic to reallocate the button for use with the new, possibly
derived struct. Ideally that wouldn't be needed, but for now that's
what we have.
Part of T74432.
Differential Revision: https://developer.blender.org/D7610
Reviewed by: Brecht Van Lommel, Campbell Barton
|
|
Showing the Python error without any explanation is often
not enough information and doesn't hint that the error was in the
user input.
The error report from a invalid expression such as '..1' used to be:
('invalid syntax', ('<string>', 1, 1, '..1'))
Now reads:
Error evaluating number, see Info editor for details: invalid syntax
Address issue raised by T78913.
|
|
Master collections and root node trees should now be working as expected
in that regard.
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/interface` module.
No functional changes.
|
|
|
|
|
|
|
|
Part of T74432.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
|
|
Both the MS headers and blender headers define the HKEY
which gives all kind of inclusion order issues.
This diff renames all *KEY constants to EVT_*KEY to resolve
this conflict.
Reviewed By: brecht , dfelinto
Differential Revision: http://developer.blender.org/D7164
|
|
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
When there was no way to find the data-path from context
the shortcut was still being created.
It would evaluate to "context.(null)".
Now adding shortcuts will be disabled if the path can't be computed.
|
|
Differential Revision: https://developer.blender.org/D5716
|
|
While the vast majority of labels would never get a button context menu
(as opposed to the regular context menu of this region), draggable
labels would still reach code for such context menu creation. From what
I can tell only file browser icons/thumbnails and the properties editor
data path would be affected. The button context menu doesn't make sense
for them, so let the region context menu show up instead.
If at some point we want button context menus for specific labels, we
can make checks more granular.
|
|
|
|
Differential Revision: https://developer.blender.org/D5576
|
|
Patch by Yevgeny Makarov (jenkm)
Differential Revision: D5514
|
