Age | Commit message (Collapse) | Author |
|
|
|
Alembic is not a single file format, it can be stored in two different
ways: Ogawa and HDF5. Ogawa replaced HDF5 and is smaller and much faster
(4-25x) to read ([source](http://exocortex.com/blog/alembic_is_about_to_get_really_fast)).
As long as Blender has had Alembic support, it has never supported the
HDF5 format in any release. There is a build option `WITH_ALEMBIC_HDF5`
that can be used to enable HDF5 support in your own build. This commit
removes this build option and the code that it manages.
In the years that I have been maintainer of Blender's Alembic code, I
only remember getting a request to support HDF5 once, and that was to
support very old software that has likely since then been updated to
support Ogawa. Ubuntu and Fedora also seem to bundle Blender without
HDF5 support.
This decision was discussed on
[DevTalk](https://devtalk.blender.org/t/alembic-hdf5-support-completely-remove)
where someone also mentioned that there is a tool available that can
convert HDF5 files to the Ogawa format.
|
|
So not to be confused with subsurf scatter
Differential Revision: https://developer.blender.org/D8005
|
|
Functionality here has become confusing over time,
this removes duplicate, similar functions, preferring to set the mode
instead of toggle, enter, exit.
Mode switching utility function behaved differently regarding undo,
'ED_object_mode_toggle' for example didn't skip the undo push
where 'ED_object_mode_set' did.
Some callers chose these functions based on the intended undo behavior,
even when toggling didn't make sense.
There was also ED_object_mode_generic_enter which was similar to
ED_object_mode_set, instead of the reverse of ED_object_mode_generic_exit.
Simplify object mode switching internals:
- Replace ED_object_mode_generic_enter with ED_object_mode_set.
- Remove ED_object_mode_toggle as nearly all callers needed to check
the current mode so toggling would set the mode argument correctly.
- Use ED_object_mode_set for the object mode switching operator
to simplify logic.
- Add ED_object_mode_set_ex which has an argument to disable undo,
needed when loading undo data needs to set the mode.
- Remove unused ED_object_mode_exit.
|
|
|
|
|
|
This moves the `alembic`, `avi`, `collada`, and `usd` modules into a common
`io` directory.
This also cleans up some `#include "../../{somedir}/{somefile}.h"` by
adding `../../io/{somedir}` to `CMakeLists.txt` and then just using
`#include "{somefile}.h"`.
No functional changes.
|
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
Importers/exporters should show the sidebar by default (if they have
any settings). For some reason this was missing for the Alembic and
Collada exporters.
|
|
- "Only Export Selected Objects" → "Selection Only", as this is the
standard used in other exporters.
- "Evaluation Mode" → "Use Settings for", as this is clearer for users
who aren't as familiar with the technical details of the depsgraph.
- "Use Instancing" → "Instancing", and moved the checkbox to the end of
the option list into its own box "Experimental". This looks a bit
cleaner than just plonking "EXPERIMENTAL" in the checkbox label.
|
|
Most options were 'Export …', now they are just '…'.
For example, 'Export UV Maps' → 'UV Maps'.
|
|
The way the USD exporter currently works, it is not possible to export
invisible objects. As such, the 'Visible Objects Only' option was
confusing.
Exporting invisible objects means obtaining invisible evaluated objects
from the depsgraph, which is not something that's currently implemented.
Once that's done, we can reintroduce this option.
|
|
There are options for the exporter that are relevant for each export, for
example the choice between Viewport or Render settings, or whether to
export the current frame or an animation. It's better to have the options
panel opened by default.
|
|
This commit introduces the first version of an exporter to Pixar's
Universal Scene Description (USD) format.
Reviewed By: sergey, LazyDodo
Differential Revision: https://developer.blender.org/D6287
- The USD libraries are built by `make deps`, but not yet built by
install_deps.sh.
- Only experimental support for instancing; by default all duplicated
objects are made real in the USD file. This is fine for exporting a
linked-in posed character, not so much for thousands of pebbles etc.
- The way materials and UV coordinates and Normals are exported is going
to change soon.
- This patch contains LazyDodo's fixes for building on Windows in D5359.
== Meshes ==
USD seems to support neither per-material nor per-face-group
double-sidedness, so we just use the flag from the first non-empty
material slot. If there is no material we default to double-sidedness.
Each UV map is stored on the mesh in a separate primvar. Materials can
refer to these UV maps, but this is not yet exported by Blender. The
primvar name is the same as the UV Map name. This is to allow the
standard name "st" for texture coordinates by naming the UV Map as such,
without having to guess which UV Map is the "standard" one.
Face-varying mesh normals are written to USD. When the mesh has custom
loop normals those are written. Otherwise the poly flag `ME_SMOOTH` is
inspected to determine the normals.
The UV maps and mesh normals take up a significant amount of space, so
exporting them is optional. They're still enabled by default, though.
For comparison: a shot of Spring (03_035_A) is 1.2 GiB when exported
with UVs and normals, and 262 MiB without. We probably have room for
optimisation of written UVs and normals.
The mesh subdivision scheme isn't using the default value 'Catmull
Clark', but uses 'None', indicating we're exporting a polygonal mesh.
This is necessary for USD to understand our normals; otherwise the mesh
is always rendered smooth. In the future we may want to expose this
choice of subdivision scheme to the user, or auto-detect it when we
actually support exporting pre-subdivision meshes.
A possible optimisation could be to inspect whether all polygons are
smooth or flat, and mark the USD mesh as such. This can be added when
needed.
== Animation ==
Mesh and transform animation are now written when passing
`animation=True` to the export operator. There is no inspection of
whether an object is actually animated or not; USD can handle
deduplication of static values for us.
The administration of which timecode to use for the export is left to
the file-format-specific concrete subclasses of
`AbstractHierarchyIterator`; the abstract iterator itself doesn't know
anything about the passage of time. This will allow subclasses for the
frame-based USD format and time-based Alembic format.
== Support for simple preview materials ==
Very simple versions of the materials are now exported, using only the
viewport diffuse RGB, metallic, and roughness.
When there are multiple materials, the mesh faces are stored as geometry
subset and each material is assigned to the appropriate subset. If there
is only one material this is skipped.
The first material if any) is always applied to the mesh itself
(regardless of the existence of geometry subsets), because the Hydra
viewport doesn't support materials on subsets. See
https://github.com/PixarAnimationStudios/USD/issues/542 for more info.
Note that the geometry subsets are not yet time-sampled, so it may break
when an animated mesh changes topology.
Materials are exported as a flat list under a top-level '/_materials'
namespace. This inhibits instancing of the objects using those
materials, so this is subject to change.
== Hair ==
Only the parent strands are exported, and only with a constant colour.
No UV coordinates, no information about the normals.
== Camera ==
Only perspective cameras are supported for now.
== Particles ==
Particles are only written when they are alive, which means that they
are always visible (there is currently no code that deals with marking
them as invisible outside their lifespan).
Particle-system-instanced objects are exported by suffixing the object
name with the particle's persistent ID, giving each particle XForm a
unique name.
== Instancing/referencing ==
This exporter has experimental support for instancing/referencing.
Dupli-object meshes are now written to USD as references to the original
mesh. This is still very limited in correctness, as there are issues
referencing to materials from a referenced mesh.
I am still committing this, as it gives us a place to start when
continuing the quest for proper instancing in USD.
== Lights ==
USD does not directly support spot lights, so those aren't exported yet.
It's possible to add this in the future via the UsdLuxShapingAPI. The
units used for the light intensity are also still a bit of a mystery.
== Fluid vertex velocities ==
Currently only fluid simulations (not meshes in general) have explicit
vertex velocities. This is the most important case for exporting
velocities, though, as the baked mesh changes topology all the time, and
thus computing the velocities at import time in a post-processing step
is hard.
== The Building Process ==
- USD is built as monolithic library, instead of 25 smaller libraries.
We were linking all of them as 'whole archive' anyway, so this doesn't
affect the final file size. It does, however, make life easier with
respect to linking order, and handling upstream changes.
- The JSON files required by USD are installed into datafiles/usd; they
are required on every platform. Set the `PXR_PATH_DEBUG` to any value
to have the USD library print the paths it uses to find those files.
- USD is patched so that it finds the aforementioned JSON files in a path
that we pass to it from Blender.
- USD is patched to have a `PXR_BUILD_USD_TOOLS` CMake option to disable
building the tools in its `bin` directory. This is sent as a pull
request at https://github.com/PixarAnimationStudios/USD/pull/1048
|
|
The visibility of the object is what counts, not just the visibility of
the collection.
|
|
There are no more 'layers' in Blender. I chose 'Visible Objects' rather
than 'Visible Collections' to be consistent with the other
'{Renderable,Selected} Objects Only' options.
No functional changes.
|
|
Importing an Alembic file with a relative path is now also possible.
|
|
When the result isn't used, prefer post increment/decrement
(already used nearly everywhere in Blender).
|
|
This change ensures that operators which needs access to evaluated data
first makes sure there is a dependency graph.
Other accesses to the dependency graph made it more explicit about
whether they just need a valid dependency graph pointer or whether they
expect the graph to be already evaluated.
This replaces OPTYPE_USE_EVAL_DATA which is now removed.
Some general rules about usage of accessors:
- Drawing is expected to happen from a fully evaluated dependency graph.
There is now a function to access it, which will in the future control
that dependency graph is actually evaluated.
This check is not yet done because there are some things to be taken
care about first: for example, post-update hooks might leave scene in
a state where something is still tagged for update.
- All operators which needs to access evaluated state must use
CTX_data_ensure_evaluated_depsgraph().
This function replaces OPTYPE_USE_EVAL_DATA.
The call is generally to be done in the very beginning of the
operator, prior other logic (unless this is some comprehensive
operator which might or might not need access to an evaluated state).
This call is never to be used from a loop.
If some utility function requires evaluated state of dependency graph
the graph is to be passed as an explicit argument. This way it is
clear that no evaluation happens in a loop or something like this.
- All cases which needs to know dependency graph pointer, but which
doesn't want to actually evaluate it can use old-style function
CTX_data_depsgraph_pointer(), assuming that underlying code will
ensure dependency graph is evaluated prior to accessing it.
- The new functions are replacing OPTYPE_USE_EVAL_DATA, so now it is
explicit and local about where dependency graph is being ensured.
This commit also contains some fixes of wrong usage of evaluation
functions on original objects. Ideally should be split out, but in
reality with all the APIs being renamed is quite tricky.
Fixes T67454: Blender crash on rapid undo and select
Speculation here is that sometimes undo and selection operators are
sometimes handled in the same event loop iteration, which leaves
non-evaluated dependency graph.
Fixes T67973: Crash on Fix Deforms operator
Fixes T67902: Crash when undo a loop cut
Reviewers: brecht
Reviewed By: brecht
Subscribers: lichtwerk
Maniphest Tasks: T67454
Differential Revision: https://developer.blender.org/D5343
|
|
|
|
|
|
|
|
The collada exporter allows to export transforms either as Matrix
or as a decomposition of Translation, Rotation aand Scale.
The decomposition option was falsely named "TransRotLoc".
I renamed it to the much more descriptive word "Decomposed".
The tooltip already contains sufficient information, so there
is no need to change that.
|
|
export
When exporting an object we can choose the transformation type 'Matrix'
or 'trans/rot/scale' When exporting an animation we have the same choice
regarding the used transformation type.
However we must make sure that animations and objects use the same
transformation type within one colleda export. The user interface is
now reworked such that the correct settings are always guaranteed.
I also reworked the tool tips
|
|
This is not a valid property.
Additionally, there is very much the same property with a valid
identifier defined few lines below.
|
|
Added new feature: Collada: global axis rotation upon export (UI)
The new feature allows to specify the target rest coordinate system upon export.
This allows for example to export a character that is in Blender orientation (Y forward)
to match the Secondlife orientation where (-X forward)
- Refactor:Added new utility methods to collada_utils
Made BCMatrix class more powerfull
moved Blender related structures into new BlenderContext class
added class wrapper to encapsulate ExportSettings structure
Added blender context getters to ExportSettings
added access methods to BlenderContext into ExportSettings class
Moved class BCMatrix into BlenderContext
moved utility functions from collada_util into BlenderContext
replace own function for parenting by a call to ED_object_parent_set()
- Cleanup: removed obsolete parameters from methods
renamed parameters for better understanding
cleanup whitespace and indentation
removed obsolete comments
|
|
Most code uses ReportList argument last (or at least not first)
when an optional report list can be passed in.
|
|
The goal is to prevent assignment of temporary or evaluated meshes
to objects from the main database.
Majority of the change is actually related on passing reports around.
On a positive side there are more error prints which can become more
visible to scripters.
There are still possible further improvements in the related areas.
For example, disable user counting for evaluated ID datablocks when
assignment happens. But can also happen later on as a separate
improvement.
Reviewers: brecht, campbellbarton, mont29
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4884
|
|
* The cache file datablock is now evaluated as part of the dependency graph,
creating/freeing the Alembic file handle matching the current frame.
Modifiers and constraints depend on this evaluation.
* Cache file handles and readers now only exist on COW datablocks, never the
original ones.
* Object data paths are flushed back to the original for the user interface.
* The cache file keeps a list of all readers associated with its handle, and
automatically frees them when the handle is freed. This kind of sharing of
data across datablocks is weak but we have no better mechanism for it.
Fix T62720: Alembic sequences not working and crashing
Differential Revision: https://developer.blender.org/D4774
|
|
Prepare for enabling ReflowComments.
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
Tested to work on Linux and macOS.
This will be enabled once all platforms are verified.
See D4684
|
|
No functional change, this adds LIB definition and args to cmake files.
Without this it's difficult to migrate away from 'BLENDER_SORTED_LIBS'
since there are many platforms/configurations that could break when
changing linking order.
Manually add and enable WITHOUT_SORTED_LIBS to try building
without sorted libs (currently fails since all variables are empty).
This check will eventually be removed.
See T46725.
|
|
Mostly functions wrapping args, not confirming to our style guide.
|
|
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
Following removal from C source code.
See: 8c68ed6df16d8893
|
|
Needed for clan-format not to wrap onto one line.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
It's now possible to export curves and NURBS as mesh data to Alembic.
This allows artists to do any crazy thing on curves and export the
visual result to Alembic for interoperability with other software (or
caching for later use, etc.). It's an often-requested feature.
This works around T60503 and the fixes export part of T51311.
Note that exporting zero-width curves is currently not supported, as
exporting a faceless mesh (e.g. just edges and vertices) is not
supported by the mesh writer at all.
To test, create a curve with thickness (for example extruded), export to
Alembic and check the 'Curves to Mesh' checkbox in the export options.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D4213
|
|
The Collada exporter suppresses the export of flat animation curves
to optimize the animation (in fact to make the exported file smaller).
But sometimes it is important to also have the flat curves exported
because they may be needed to define an initial transformation to
a fixed location - like translating the weapon from the ground floor
to the back of the model in the report.
I added a new option "all keyed curves" which is disabled by default
but when enabled it also exports flat curves.
feedback is very welcome
|
|
This is similar to what physics baking is doing: invoking the operator
runs a background job, whereas executing blocks. This makes Python
scripts calling the Alembic import/export operators more predictable.
For backwardward compatibility with existing Python code the
`as_background_job` parameter still exists, which overrides the
behaviour chosen by INVOKE/EXECUTE.
Reviewers: brecht
Reviewed by: brecht
Differential revision: https://developer.blender.org/D4137/new/
|
|
|
|
Also (mostly in comments): behaviour -> behavior (we use American English).
|
|
|
|
There were at least three copies of those:
- OB_RECALC* family of flags, which are rudiment of an old
dependency graph system.
- PSYS_RECALC* which were used by old dependency graph system
as a separate set since the graph itself did not handle
particle systems.
- DEG_TAG_* which was used to tag IDs.
Now there is a single set, which defines what can be tagged
and queried for an update. It also has some aggregate flags
to make queries simpler.
Lets once and for all solve the madness of those flags, stick
to a single set, which will not overlap with anything or require
any extra conversion.
Technically, shouldn't be measurable user difference, but some
of the agregate flags for few dependency graph components did
change.
Fixes T58632: Particle don't update rotation settings
|
|
This properties does not appear to be used anymore.
|