| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Move runtime parameters out of context creation.
Not being able to choose another region and v3d limits the use of the
snap API.
|
|
|
|
Replace with brief note in warning.
|
|
Rename:
- EDBM_mesh_free -> EDBM_mesh_free_data
BKE_editmesh_free -> BKE_editmesh_free_data
Since this doesn't free the edit-mesh pointer.
- BKE_editmesh_free_derivedmesh -> BKE_editmesh_free_derived_caches
Since this no longer uses derived-mesh, match naming for the related
object function BKE_object_free_derived_caches.
Also remove `do_tessellate` argument from BKE_editmesh_create,
since the caller can explicitly do this if it's needed,
with the advantage that it can be combined with normal calculation
which is faster on high-poly meshes.
|
|
Split mesh restore logic into a new function:
`EDBM_redo_state_restore_and_free`.
|
|
Using BMesh operators through the edit-mesh API created a full copy
of the mesh so it was possible to restore the mesh in case
one of the operators raised an error.
Remove support for automatic backup/restore from the EDBM_op_* API's
as it adds significant overhead and was rarely used.
Operators that need this can use the BMBackup API to backup & restore
the mesh in case of failure.
Add warning levels to BMO_error_raise so operators can report problems
without it being interpreted as a request to cancel the operation.
For high-poly meshes creating and freeing a full copy is an expensive
operation, removing this gives a speedup of ~1.77x for most operators
except for "connect_verts" / "connect_vert_pair"
which still uses this functionality.
|
|
The evaluated meshes no longer store a copy of the edit-mesh
so tagging when a BMesh operator fails can be removed.
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
|
|
|
|
|
|
|
|
|
|
This patch ensures that selection mode flushing updates total selection
counts internally. This reduces recounting when we are sure that the
input total selection counts were up to date.
For example for circle selection the total selection counts were
correct. But during flushing the selection could have been changed and
therefore the selection was always recounted.
This increased the performance on selected system from 6.90 FPS to 8.25
FPS during circle selection operations.
Before: {F10179981}
After: {F10179982}
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11647
|
|
Support calculating face normals when tessellating. When this is done
before updating vertex normals it gives ~20% performance improvement.
Now vertex normal calculation only needs to perform a single pass on the
mesh vertices when called after tessellation.
Extended versions of normal & looptri update functions have been added:
- BM_mesh_calc_tessellation_ex
- BM_mesh_normals_update_ex
Most callers don't need to be aware of this detail by using:
- BKE_editmesh_looptri_and_normals_calc
- BKE_editmesh_looptri_and_normals_calc_with_partial
- EDBM_update also takes advantage of this,
where calling EDBM_update with calc_looptri & calc_normals
enabled uses the faster normal updating logic.
|
|
Rename function EDBM_update_generic to EDBM_update, use a parameters
argument for better readability.
Also add calc_normals argument, which will have benefits when
calculating normals and tessellation together is optimized.
|
|
This allows the addition of the `SNAP_GEOM_CAGE` option.
Currently unused.
|
|
Use uvedit_uv_select_test which accounts for UV Sync selection.
Ref D10830
|
|
Caused by da8dc204bd062b2712869cf2709d2530915249b5
|
|
Caused by rBba97da21acf2.
For non-topology mirror hidden verts were never respected/included in
EDBM_verts_mirror_cache_begin (they were excluded from the kdtree).
Prior to said commit, hidden mirrored verts that were still in the map
would have been excluded in a separate loop over vertices in
'editmesh_mirror_data_calc()' by checking BM_ELEM_HIDDEN. Due to the new
nature of this function this check was now moved to
EDBM_verts_mirror_cache_begin.
Maniphest Tasks: T83119
Differential Revision: https://developer.blender.org/D9673
|
|
Changing options after using select-linked didn't work
when the object being selected wasn't the active object.
|
|
Cleanup old tracker task format to the new. e.g: [#34039] to T34039
Ref D8718
|
|
Mirror
The mirror map can reference a hidden vertex that is currently ignored
in the transformation.
Thus the mirror element array is not filled.
|
|
|
|
Internally UV selection considered close UV's to be connected.
While this could be convenient in some cases,
it complicates logic for more advanced selection operations that
need to check when UV's should be considered part of the same vertex
since simple threshold checks would give different results depending
on the order of UV's tested.
Users must now run "Merge by Distance" instead of relying
on this selection threshold.
|
|
|
|
and fix Rip Region double proportional checkbox
This fixes the double prop edit checkbox in the redo menu.
This also makes it so that proportional edit in connected mode now
matches how it behaves in mesh edit mode.
Without this change, ripping in UV edit mode with proportional edit on
would be useless as the UV verts you ripped will still be stuck together
even if they were not connected anymore.
Reviewed By: Campbell
Differential Revision: http://developer.blender.org/D8289
|
|
Clang Tidy reported a couple of false positives. I disabled
those `NOLINTNEXTLINE`.
Differential Revision: https://developer.blender.org/D8199
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/mesh` module.
No functional changes.
|
|
This is related to T76659.
This just renames data type names to `CD_PROP_STRING`, `CD_PROP_FLOAT`
and `CD_PROP_INT32`. It makes them a bit more specific and removes
unnecessary abbreviations.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7980
|
|
|
|
|
|
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
|
|
Spatial & topology mirror table each used a single function
taking a char as an identifier.
Split these into begin/end/lookup functions.
|
|
|
|
|
|
While it might be handy to have type-less functionality which is
similar to how C++ math is implemented it can not be easily achieved
with just preprocessor in a way which does not have side-effects on
wrong usage.
There macros where often used on a non-trivial expression, and there
was at least one usage where it was causing an actual side effect/bug
on Windows (see change around square_f(sh[index++]) in studiolight.c).
For such cases it is handy to have a function which is guaranteed to
have zero side-effects. The motivation behind actually removing the
macros is that there is already a way to do similar calculation. Also,
not having such macros is a way to guarantee that its usage is not
changed in a way which have side-effects and that it's not used as an
inspiration for cases where it should not be used.
Differential Revision: https://developer.blender.org/D7051
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
Was marked 'FIXME' however this only ever happens in exceptional cases.
Also comment why tagging is needed in this case.
|
|
This avoids a list lookup in Main (recently added), passing in a mesh
instead of an edit-mesh, since the mesh links to the edit-mesh.
|
|
Remove this pointer since it's linking Mesh data back to the object,
where a single edit-mesh may have multiple object users,
causing incorrect assumptions in the code.
Resolves dangling pointer part of the T72667 crash,
although there are other issues which still need to be fixed.
In EDBM_op_finish and EDBM_update_generic,
full Main lookups have been added which should be replaced with mesh
argument or the update tagging moved elsewhere.
|
|
|
|
Currently the islands are created depending only on the visible UVs.
This can be confusing because compared to Edit Meshes, islands are created based on the selected elements.
T68284 shows a case where this confusion is observed.
Differential Revision: https://developer.blender.org/D6502
|
|
This was an old bug which could be caused by saving after separating.
Changes from 79b703bb635e made this fail reliably.
Update shape key indices when they may be used again later.
|
|
Use consistent terminology.
|
|
|
|
|
|
|
|
|
