| Age | Commit message (Collapse) | Author |
|---|
|
This makes the internal naming consistent with the public API. And also gives
us a visibility_flag rather than restrictflag that can be extended with more
flags.
|
|
These should have been removed earlier but were forgotten.
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
|
|
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
|
|
As in the old Blender Internal baking code, this still relies on there being a
good mapping to the original vertices.
|
|
|
|
Baking to Vertex Colors would always bake to sculpt vertex colors (if
such a layer is present) even if those are not enabled in the
experimental preferences. This would bake without an error but leave the
user without a result to look in the viewport.
Now check if sculpt vertex colors are enabled and only bake to them in
that case.
Maniphest Tasks: T86455
Differential Revision: https://developer.blender.org/D10692
|
|
|
|
|
|
Baking vertex colors per-corner leads to unwanted discontinuities when there is
sampling noise, for example in ambient occlusion or with a bevel shader node for
normals. For this reason the code used to always average results per-vertex.
However when using split normals, multiple materials or UV islands, we do want to
preserve discontinuities. So now bake per corner, but make sure the sampling seed
is shared for vertices.
Fix T85550: vertex color baking crash with split normals, Ref D10399
Fix T84663: vertex color baking blending at UV seams
|
|
|
|
Now light baking should match the render.
|
|
Differential Revision: https://developer.blender.org/D10125
|
|
Since the introduction in rB2221389d6e8e, baking to vertex colors would
still check for the existence of a valid UVMap (as if baking to image
textures).
Now check for vertex colors instead if target is
R_BAKE_TARGET_VERTEX_COLORS.
Maniphest Tasks: T84416
Differential Revision: https://developer.blender.org/D10006
|
|
|
|
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
|
|
In the Bake > Output panel, there is now a choice between Image Textures and
Vertex Colors. The active vertex color layer is used for baking. This works
with both existing per-corner and sculpt per-vertex vertex colors.
|
|
Split of internal/external image bake target code off into smaller functions and
refactor associated data structures for clarity. Designed so that a vertex color
bake target is easy to fit in.
Also avoid passing in a huge number of arguments into the main baking function,
pass a struct instead.
|
|
|
|
Reviewers: sergey, sybren
Differential Revision: https://developer.blender.org/D8611
|
|
|
|
|
|
The abbreviation 'init' is brief, unambiguous and already used
in thousands of places, also initialize is often accidentally
written with British spelling.
|
|
|
|
This is in order to disolve GPU_draw.h into more meaningful code blocks.
All the Image related function are in `image_gpu.c`.
All the MovieClip related function are in `movieclip.c`.
The IMB module now has a connection with GPU. This is not strickly
necessary and the code could be move to `image_gpu.c` if needed.
The Image garbage collection is also ported to `image_gpu.c`.
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/object` module.
No functional changes.
|
|
The previous naming scheme for the "selected to active" baking options
lead to confusion and they were not describing what they actually did.
To remedy this, I've added a new settings that does what the older setting implied it did.
Reviewed By: Brecht, Dalai, Andy Davies
Differential Revision: http://developer.blender.org/D7733
|
|
There should be no user visible change from this, except that tile size
now affects performance. The goal here is to simplify bake denoising in
D3099, letting it reuse more denoising tiles and pass code.
A lot of code is now shared with regular rendering, with the two main
differences being that we read some render result passes from the bake API
when starting to render a tile, and call the bake kernel instead of the
path trace kernel.
With this kind of design where Cycles asks for tiles from the bake API,
it should eventually be easier to reduce memory usage, show tiles as
they are baked, or bake multiple passes at once, though there's still
quite some work needed for that.
Reviewers: #cycles
Subscribers: monio, wmatyjewicz, lukasstockner97, michaelknubben
Differential Revision: https://developer.blender.org/D3108
|
|
|
|
The material displayed in the error message due to the lack of active
texture was that of the previous slot.
|
|
Part of T74432.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
Follow up of b2ee1770d4c3 and 10c2254d412d, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
|
|
|
|
Both the MS headers and blender headers define the HKEY
which gives all kind of inclusion order issues.
This diff renames all *KEY constants to EVT_*KEY to resolve
this conflict.
Reviewed By: brecht , dfelinto
Differential Revision: http://developer.blender.org/D7164
|
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
Old Name New Name
========= =========
init_def_material BKE_materials_init
BKE_material_gpencil_default_free BKE_materials_exit
test_object_materials BKE_object_materials_test
test_all_objects_materials BKE_objects_materials_test_all
give_matarar BKE_object_material_array
give_totcolp BKE_object_material_num
give_current_material_p BKE_object_material_get_p
give_current_material BKE_object_material_get
assign_material BKE_object_material_assign
assign_matarar BKE_object_material_array_assign
give_matarar_id BKE_id_material_array
give_totcolp_id BKE_id_material_num
assign_material_id BKE_id_material_assign
clear_matcopybuf BKE_material_copybuf_clear
free_matcopybuf BKE_material_copybuf_free
copy_matcopybuf BKE_material_copybuf_copy
paste_matcopybuf BKE_material_copybuf_paste
BKE_material_init_gpencil_settings BKE_gpencil_material_attr_init
BKE_material_add_gpencil BKE_gpencil_material_add
BKE_material_gpencil_get BKE_gpencil_material
BKE_material_gpencil_default_get BKE_gpencil_material_default
BKE_material_gpencil_settings_get BKE_gpencil_material_settings
|
|
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
|
|
Users now can turn on in a viewport collections that are temporarily
hidden (eye) in the view layer.
Design task: T61327
As for the implementation, I had to decouple the visibility in the
depsgraph from the visibility in the view layer.
Also there is a "bug" that in a way was there before which is some
operators (e.g., writing a text inside of a text object, tab into edit
mode) run regardless of the visibility of the active object. The bug was
present already (with object type visibility restriction) in 2.80 so if
we decide to tackle it, can be done separately (I have a patch for it
though P1132).
Reviewed by: brecht (thank you)
Differential Revision: D5992
|
|
Currently unused, but will allow to keep of an owner of the depsgraph.
Could also simplify other APIs in the future by avoiding to pass bmain
explicitly to relation update functions and things like that.
|
|
When we create the cage procedurally, we need to remove any edge split
modifiers. Since the new depsgraph in 2.80 we were removing the
modifiers straight from the evaluated object (it is a copy anyways).
On top of that we need to reset its eval data state (BKE_object_eval_reset)
to make sure the call to BKE_object_to_mesh to generate the cage would take the
new modifier stack state into account.
However doing so was freeing the low poly mesh we use later to convert
the normal space.
The solution (and this patch in fact ;) ) as suggested by Sergey Sharybin is to
use BKE_mesh_new_from_object() directly as well as force the modifiers to be
recalculated when any edge split modifier is removed.
|
|
|
|
This commit extends dependency graph API with an argument which
denotes that all custom data layers are to be preserved. This
forces modifier stack re-evaluation with more inclusive mask.
Far from ideal, since this might fail in certain configurations
with indirectly used objects which might be missing layers needed
for the current object evaluation. But this is how it worked for
a long time, so should be good enough for until more sophisticated
solution is found.
In order to use this new behavior two things are to be passed:
- Pass keep_all_data_layers=True
- Pass a valid dependency graph.
The dependency graph is only needed if keep_all_data_layers=True
and is NOT to be passed if keep_all_data_layers=False.
If keep_all_data_layers=True the dependency graph MUST be passed.
Reviewers: mont29, brecht
Reviewed By: mont29
Maniphest Tasks: T64994, T64794
Differential Revision: https://developer.blender.org/D4940
|
|
One of the usecases is to create mesh from an object is a manner similar to
how Apply Modifiers does it, and have it in the bmain so it can be referenced
by other objects.
This usecase is something what went unnoticed in the previous API changes, so
here is a followup.
Summary of changes:
* bpy.meshes.new_from_object() behaves almost the same as before this change.
The difference now is that it now ensures all referenced data-blocks are
original (for example, materials referenced by the mesh).
* object.to_mesh() now creates free-standing Mesh data-block which is outside
of any bmain. The object owns it, which guarantees the memory never leaks.
It is possible to force free memory by calling object.to_mesh_clear().
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4875
|
|
Main goal here is to make it obvious and predictable about
what is going on.
Summary of changes.
- Access to dependency graph is now only possible to a fully evaluated
graph. This is now done via context.evaluated_depsgraph_get().
The call will ensure both relations and datablocks are updated.
This way we don't allow access to some known bad state of the graph,
and also making explicit that getting update dependency graph is not
cheap.
- Access to evaluated ID is now possible via id.evaluated_get().
It was already possible to get evaluated ID via dependency graph,
but that was a bit confusing why access to original is done via ID
and to evaluated via depsgraph.
If datablock is not covered by dependency graph it will be returned
as-is.
- Similarly, request for original from an ID which is not evaluated
will return ID as-is.
- Removed scene.update().
This is very expensive to update all the view layers.
- Added depsgraph.update().
Now when temporary changes to objects are to be done, this is to
happen on original object and then dependency graph is to be
updated.
- Changed object.to_mesh() to behave the following way:
* When is used for original object modifiers are ignored.
For meshes this acts similar to mesh-copy, not very useful but
allows to keep code paths similar (i.e. for exporter which has
Apply Modifiers option it's only matter choosing between original
and evaluated object, the to_mesh() part can stay the same).
For curves this gives a mesh which is constructed from displist
without taking own modifiers and modifiers of bevel/taper objects
into account.
For metaballs this gives empty mesh.
Polygonization of metaball is not possible from a single object.
* When is used for evaluated object modifiers are always applied.
In fact, no evaluation is happening, the mesh is either copied
as-is, or constructed from current state of curve cache.
Arguments to apply modifiers and calculate original coordinates (ORCO,
aka undeformed coordinates) are removed. The ORCO is to be calculated
as part of dependency graph evaluation.
File used to regression-test (a packed Python script into .blend):
{F7033464}
Patch to make addons tests to pass:
{F7033466}
NOTE: I've included changes to FBX exporter, and those are addressing
report T63689.
NOTE: All the enabled-by-default addons are to be ported still, but
first want to have agreement on this part of changes.
NOTE: Also need to work on documentation for Python API, but, again,
better be done after having agreement on this work.
Reviewers: brecht, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D4834
|
|
|
|
Prepare for enabling ReflowComments.
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
