Age | Commit message (Collapse) | Author |
|
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
|
|
Now that proxy conversions if enforced, those operations are not useful
anymore.
Part of T91671.
|
|
MSVC used to warn about const mismatch for arguments passed by value.
Remove these as newer versions of MSVC no longer show this warning.
|
|
Ref T92709
|
|
When dropping asset objects, place them under the mouse-cursor
along with any other objects they link in.
Ref D12935
Reviewed By: Severin
|
|
Adds a button, Update All Paths, to the Motion Paths property tabs and
will always show. The operator goes through all visible objects and
updates their motion paths.
The current implementation has a subtle functional change. Calculating
or updating motion paths for armature objects (through the Object tab,
not Armature tab) now also updates the paths for its bones. We could
preserve the old behavior but it doesn't seem necessary. It seems more
likely that the animator wants to update both anyways.
Reviewed by: sybren
Maniphest Tasks: T83068
Differential Revision: https://developer.blender.org/D11667
|
|
|
|
This adds a toggle to node group inputs exposed in the modifier to use
an attribute instead of a single value. When the toggle is pressed, the
button switches to a text button to choose an attribute name. Attribute
search isn't implemented here yet.
One confusing thing is that some values can't be driven by attributes
at all, like the size of a primitive node. In that case, we should have
a node warning, but that will be separate since it's more general.
We can also have an option to turn off this toggle in node group
input settings.
The two new properties for each input are stored with the same name
as the value, but with `"_use_attribute"` and `"_attribute_name"``
suffixes. The properties are not added for socket types that don't
support attribute input, like object sockets.
Differential Revision: https://developer.blender.org/D12504
|
|
Create dot-dash effect for grease pencil strokes. User can manually edit the length, gap and styles for each segment of dashed lines.
The values in each segment can all be key-framed to make animations.
Reviewed By: Hans Goudey (HooglyBoogly), Antonio Vazquez (antoniov)
Differential Revision: http://developer.blender.org/D11876
|
|
Add Apply Constraint, Duplicate Constraint, and Copy To Selected
operators, and include them in a menu similar to the menu for modifiers.
The shortcuts in the extras menu are also matched to modifiers.
All the here added operators are intended to work exactly like the
analogous ones for modifiers. That means the apply operator should apply
a constraint as if it was first in the list, just like modifiers do. I
have added the same warning message as for modifiers when that happens.
The decision to use this approach of appling the constraint as if it was
first, was made for consistency with modifiers. People are already used
to how it works there. Is also provides more intricate control over the
applied transforms, then just applying all constraints up to that one.
Apply all constraints is already kinda implemented in Bake Animation.
Reviewed By: HooglyBoogly, sybren, #user_interface
Differential Revision: https://developer.blender.org/D10914
|
|
This will be helpful for some cleanups I'd like to do, including
removing the unecessary C API for OpenVDB and unifying some
attribute transfer code.
|
|
This commit moves the storage of `bDeformGroup` and the active index
to `Mesh`, `Lattice`, and `bGPdata` instead of `Object`. Utility
functions are added to allow easy access to the vertex groups given
an object or an ID.
As explained in T88951, the list of vertex group names is currently
stored separately per object, even though vertex group data is stored
on the geometry. This tends to complicate code and cause bugs,
especially as geometry is created procedurally and tied less closely
to an object.
The "Copy Vertex Groups to Linked" operator is removed, since they
are stored on the geometry anyway.
This patch leaves the object-level python API for vertex groups in
place. Creating a geometry-level RNA API can be a separate step;
the changes in this commit are invasive enough as it is.
Note that opening a file saved in 3.0 in an earlier version means
the vertex groups will not be available.
Differential Revision: https://developer.blender.org/D11689
|
|
|
|
The trouble was that there was a context pointer "modifier" in the
property editor context that returned the active modifier. But the
"modifier" variable was already used in many places, for pointers
that are *not* equivalent to the active modifier.
The context pointer for the active modifier was unecessary anyway.
If we need to access a context pointer for the active modifier in the
property editor then we can add it. Until then it only adds confusion.
|
|
This implements the changes discussed in T87134 for including switch
object funcionality in 2.93. This includes:
- Remove the switch object operator experimental option
- Remove the option for switching objects in Edit Mode.
- Rename switch_object to transfer_mode.
- Enable the operator only in sculpt mode.
- Expose the operator in the Sculpt menu with an eyedropper modal
option.
On later releases, we could revisit enabling the operator in other mode
and object types as well as its place in the UI.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D10953
|
|
These two operators (one for grease pencil, one for other objects)
copy a single modifier from the active object to all selected objects.
The operators are exposed in the dropdown menus in modifier headers.
Note that It's currently possible to drag and drop modifiers between
objects in the outliner, but that only works for dragging to one object
at a time. Modifiers can also be copied with the "Make Links" operator,
but that copies *all* modifiers rather than just one. The placement
and scope of these new operators allow for more useful poll messages
and error messages as well.
Every object type that supports modifiers is supported. Although hook
and collision modifiers aren't supported because of an unexplained
comment in `BKE_object_copy_modifier`, other than that, every modifier
type is supported, including particle systems, nodes modifiers, etc.
The new modifiers are set active, which required two small tweaks to
`object.c` and `particle.c`.
Reviewed By: Hans Goudey (with additional edits)
Differential Revision: https://developer.blender.org/D9537
|
|
This adds the missing options for the effects as it is done in modifiers.
Reviewed By: HooglyBoogly
Maniphest Tasks: T83696
Differential Revision: https://developer.blender.org/D9838
|
|
This commit adds functions to set and get the object's active
modifier, which is stored as a flag in the ModifierData struct,
similar to constraints. This will be used to set the context in
the node editor. There are no visible changes in this commit.
Similar to how the node editor context works for materials, this commit
makes the node group displayed in the node editor depend on the active
object and its active modifier. To keep the node group from changing,
just pin the node group in the header.
* Shortcuts performed while there is an active modifier will affect
only that modifier (the exception is the A to expand the modifiers).
* Clicking anywhere on the empty space in a modifier's panel will make it active.
These changes require some refactoring of object modifier code. First
is splitting up the modifier property invoke callback, which now needs
to be able to get the active modifier separately from the hovered
modifier for the different operators.
Second is a change to removing modifiers, where there is now a separate
function to remove a modifier from an object's list, in order to handle
changing the active.
Finally, the panel handler needs a small tweak so that this "click in panel"
event can be handled afterwards.
|
|
In the end the process is surpringly simple, we only need to manually
convert the proxy itself into an override (which is trivial), and then
run common code with the default 'make override' operation.
Fix T81059: Add operator to convert proxies to library overrides.
|
|
This object operator exits and frees the edit data of the
current object and enters the same mode in another one in a single step,
without going through object mode or keeping multiple edit object data
active. It is assigned to the D key.
This solves all conflicts that the right/click select keymap and the
emulate 3 button mouse produces for this operation and it is independent
of the state of Lock object modes.
Also, as the SculptSession is freed, when using Multires objects go
back to their preview resolution level, so it is possible to work on
high vertex count scenes without slowing down the viewport and other
performance problems.
Reviewed By: #user_interface, pablovazquez
Differential Revision: https://developer.blender.org/D7510
|
|
This allows orphan object data for example (meshes, curves, etc)
to be dropped into the 3D View from the outliner,
creating a new object instance.
Previously the only way to do this was to add the same type of object
then swap it's data through the ID selector drop-down.
|
|
It also enables copying of linked modifiers (generating new local ones).
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
This can be useful to save the result of a cloth simulation as a
shape key without destroying the simulation, so it's possible to
e.g. re-run it to get other shapes, or simply use the new shape
key to start the simulation already in a draped state.
It also makes sense to allow applying as shape key even when the
mesh is shared, because the operation itself just adds a shape
key. To support this, split the apply operator into Apply and
Apply As Shapekey so that they can have different poll callbacks.
Differential Revision: https://developer.blender.org/D8173
|
|
See rB1fa40c9f8a81 for more details. The implementation is the same.
The only difference to the mesh modifier commit is a slight rework of
edit_modifier_invoke_properties in order to pass through to check for
other keymap items with the same shortcut.
|
|
The shortcuts act on the modifier with its panel under the mouse.
The following shortcuts are enabled by default:
- Remove modifier: X, Delete
- Apply modifier: Ctrl A
- Duplicate modifier: Shift D
More shortcuts can be added in the keymap.
Each panel can now store a custom data RNA pointer, and a new
function is added to get the custom data for the panel under the
cursor. This custom data could be used to refactor the "List Panel
System" to generalize it and integrate it further with RNA.
The same functionality will be added in further commits where it
applies to constraints, grease pencil modifiers, and effects.
Differential Revision: https://developer.blender.org/D8031
|
|
This patch implements the list panel system D7490 for grease pencil
shader effects. It also moves their drawing to a callback in
ShaderFxTypeInfo in line with the extensible architecture refactoring
goal T75724.
The implementation is basically exactly the same as for the modifier
patch (9b099c86123fc82).
Thanks to Matias Mendiola (@mendio) for helping to develop the layout
changes.
Differential Revision: https://developer.blender.org/D7985
|
|
This patch implements the list panel system D7490 for grease pencil
modifiers. It also moves their drawing to a callback in
GpencilModifierTypeInfo in line with the extensible architecture
refactoring goal T75724.
This also adds the "set_error" function for grease pencil modifiers,
which hadn't been copied from mesh modifiers yet.
The implementation is basically exactly the same as for the modifier
patch (9b099c86123fc82).
Thanks to Matias Mendiola (mendio) for providing mockups for many
of the layout changes.
Differential Revision: https://developer.blender.org/D7978
|
|
This patch implements the list panel system D7490 for constraints.
In this case the panels are still defined in Python.
The layouts are also updated to use subpanels and the a more organized
single column layout. There may be more tweaks necessary for the
layouts.
Reviewed By: Severin, billreynish, Mets
Differential Revision: https://developer.blender.org/D7499
|
|
This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
|
|
This implements the main unsubdivide algorithm which rebuilds a base mesh and extracts the grid's data from a high resolution mesh.
It includes the Rebuild Subdivisions operator, which generates all subdivision levels down to the level 0 base mesh.
It supports:
- Rebuilding an arbitrary number of levels (Unsubdivide) or as many levels as possible down to level 0 in a single step (Rebuild Subdivisions).
- Rebuilding with already existing grids.
- Meshes with n-gons and triangles
- Meshes with more than 2 faces per edge
- Base mesh made completely out of triangles
- Meshes without poles
- Meshes with multiple disconnected elements at the same subdivision level
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7372
|
|
This operator lets the user control the voxel/detail size of the voxel remesher directly from the 3D view in a similar way the Brush radius and strength are controlled. The shorcut from sculpt mode is Shift + R (similar to Shift + F for brush strength).
It shows a grid that represents the real voxel size of the object. The grid and the text are automatically aligned to the view to avoid rendering all voxels with thousands of lines.
It also has a slow mode when pressing shift that works like the slow mode of the brush radius control.
This operator controls the value changes sensitivity automatically to avoid jumping to extremelly high resolutions and run out of memory.
This way, adjusments done in lower voxel sizes are more precise. Pressing Ctrl disables this functionality and allows changing the voxel size directly in a linear way.
Reviewed By: jbakker, #user_interface, billreynish
Differential Revision: https://developer.blender.org/D6449
|
|
|
|
Only the volume object is exposed in the user interface. It is based on OpenVDB
internally. Drawing and rendering code will follow in another commit.
https://wiki.blender.org/wiki/Source/Objects/Volume
https://wiki.blender.org/wiki/Reference/Release_Notes/2.83/Volumes
Hair and PointCloud object types are hidden behind a WITH_NEW_OBJECT_TYPES
build option. These are unfinished, and included only to make it easier to
cooperate on development in the future and avoid tricky merges.
https://wiki.blender.org/wiki/Source/Objects/New_Object_Types
Ref T73201, T68981
Differential Revision: https://developer.blender.org/D6945
|
|
|
|
|
|
Remove unused OBJECT_OT_mode_set_or_submode, add
OBJECT_OT_mode_set_with_submode which can switch to edit mode as well
as a sub-mode - currently only mesh select mode is supported
(others may be added later).
|
|
The voxel remesher introduces a new workflow for sculpting without any of the limitations of Dyntopo (no geometry errors or performance penalty when blocking shapes). It is also useful for simulations and 3D printing.
This commit includes:
- Voxel remesh operator, voxel size mesh property and general remesh flags.
- Paint mask reprojection.
- Geometry undo/redo for sculpt mode. This should support remesh operations as well as future tools that modify the topology of the sculpt in a single step, like trimming tools or mesh insert brushes.
- UI changes in the sculpt topbar and the mesh properties pannel.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5407
|
|
Some modifier operators cannot be reliably executed from Edit mode
currently, so disable them from the generic mod ops pool function.
Have been very conservative here from now, keeping existing behavior
most of the time, and only forbidding Edit mode when code was already
doing it in its own way, or when it was obviously not possible.
|
|
This reverts commit 741967079c393a9eb6babd60c92a716fafa5d3e9.
We are in UI and API freeze, and this changes both.
|
|
The new name is consistent with the 'Transfer Shape' operator.
- Updated the UI descriptions for both transfer operators.
|
|
Better to make internal code naming match official/UI naming to some
extent, this will reduce confusion in the future.
This is 'breaking' scripts and files that would use that feature, but
since it is not yet officially supported nor exposed in 2.80, as far
as that release is concerned, it is effectively
a 'no functional changes' commit.
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
Needed for clan-format not to wrap onto one line.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Some features are incompatible with multithreading and reliable evaluation
of dependencies. We are now removing them as part of a bigger cleanup to
fix bugs in keyframing and invalid animation evaluations.
* Dupliframes have been removed. This was a hack added before there were
more powerful features like the array modifier.
* Slow parent has been removed, never worked in 2.8. It was always
unreliable for use in production due to depending on whatever frame was
previously evaluated, which was not always the previous frame.
* Particle instanced objects used to have their transform evaluated at
the particle time. Now it always gets the current time transform.
* Boids can no longer do predictive avoidance of force field objects,
but still for other particles.
Differential Revision: https://developer.blender.org/D4274
|
|
Done using:
source/tools/utils_maintenance/c_sort_blocks.py
|
|
|