Age | Commit message (Collapse) | Author |
|
Using OBJECT prefix for editmode operators causes
shortcuts to go into the wrong keymap.
|
|
D1163 by @panzergame, with minor edits by me (@Severin)
|
|
Our current keymap doesn't give us enough room to make such changes in
the event system. To fix small issues caused by this, we would need to do
drastic changes in Blender's keymaps and internal handling. It was worth
a try, but it didn't work.
I can write down a more descriptive statement in a few days, but for now
I need a break of this stuff.
|
|
Design task: T42339
Differential Revision: D840
Initial implementation proposal: T41867
Short description:
With this we can distinguish between holding and tabbing a key. Useful
is this if we want to assign to operators to a single shortcut. If two
operators are assigned to one shortcut, we call this a sticky key.
More info is accessible through the design task and the diff.
A few people that were involved with this:
* Sean Olson for stressing me with this burden ;) - It is his enthusiasm
that pushed me forward to get this done
* Campbell and Antony for the code and design review
* Ton for the design review
* All the other people that gave feedback on the patch and helped to
make this possible
A big "Thank You" for you all!
|
|
This modifier can be used to correct bad deformations,
Original patch D1183 by @sazerac, with own modifications
|
|
We can now use 'generic' data transfer instead.
Note new one is not an exact replacement, it should be able to do
everyting old op could do though, and more.
|
|
This add code needed to map a CD data layout from source mesh towards destination one,
and code needed to actually transfer data, using BKE's mesh remap generated data.
This allows to transfer most CD layers (vgroups, vcols, uvs...) as well as fake, boolean ones
(like smooth/sharp edges/faces, etc.). Some types are not yet transferable, mainly
shape keys, this is known TODO.
Data transfer can also use some advanced mixing in some cases (mostly, vgroups and vcols).
Notes:
* New transfer operators transfer data from active object towards selected ones.
* Modifier will be committed separately.
* Old weight transfer code (for vgroups) is kept for now, mostly because it is the only
usable one in weightpaint mode (it transfers from selected object to active one,
this is not sensible in Object mode, but needed in WeightPaint one). This will be addressed soon.
Again, heavily reviewed and enhanced by Campbell, thanks!
|
|
|
|
|
|
Also allow assigning `Object.data = None` from Python
|
|
Added a small menu with a few helper oerators next to each group panel:
* Remove group from all objects
* Select objects in group
More could be added possibly in the future.
Thanks to Campbell for the advice here.
|
|
New operator that can calls a bake function to the current render engine when available. This commit provides no feature for the users, but allows external engines to be accessed by the operator and be integrated with the baking api.
The API itself is simple. Blender sends a populated array of BakePixels to the renderer, and gets back an array of floats with the result.
The Blender Internal (and multires) system is still running independent, but we eventually will pipe it through the API as well. Cycles baking will come next as a separated commit
Python Operator:
----------------
The operator can be called with some arguments, or a user interface can be created for it. In that case the arguments can be ommited and the interface can expose the settings from bpy.context.scene.render.bake
bpy.ops.object.bake(type='COMBINED', filepath="", width=512, height=512, margin=16, use_selected_to_active=False, cage_extrusion=0, cage="", normal_space='TANGENT', normal_r='POS_X', normal_g='POS_Y', normal_b='POS_Z', save_mode='INTERNAL', use_clear=False, use_split_materials=False, use_automatic_name=False)
Note: external save mode is currently disabled.
Supported Features:
------------------
* Margin - Baked result is extended this many pixels beyond the border of each UV "island," to soften seams in the texture.
* Selected to Active - bake shading on the surface of selected object to the active object. The rays are cast from the lowpoly object inwards towards the highpoly object. If the highpoly object is not entirely involved by the lowpoly object, you can tweak the rays start point with Cage Extrusion. For even more control of the cage you can use a Cage object.
* Cage Extrusion - distance to use for the inward ray cast when using selected to active
* Custom Cage - object to use as cage (instead of the lowpoly object).
* Normal swizzle - change the axis that gets mapped to RGB
* Normal space - save as tangent or object normal spaces
Supported Passes:
-----------------
Any pass that is supported by Blender renderlayer system. Though it's up to the external engine to provide a valid enum with its supported passes. Normal passes get a special treatment since we post-process them to converted and "swizzled"
Development Notes for External Engines:
---------------------------------------
(read them in bake_api.c)
* For a complete implementation example look at the Cycles Bake commit (next).
Review: D421
Reviewed by: Campbell Barton, Brecht van Lommel, Sergey Sharybin, Thomas Dinge
Normal map pipeline "consulting" by Andy Davies (metalliandy)
Original design by Brecht van Lommel.
The entire commit history can be found on the branch: bake-cycles
|
|
Opted to keep includes if they are used indirectly (even if removing is possible).
|
|
|
|
|
|
D432 from Walid Shouman with normal & uniform options added.
|
|
We had several reports where users would create rigid bodies by accident
and then wonder why transformations behave differently.
Since these actions aren't used that often, just remove the shortcuts.
|
|
Levels of detail can be added and modified in the object panel. The object
panel also contains new tools for generating levels of detail, setting up
levels of detail based on object names (useful for importing), and
clearing an object's level of detail settings. This is meant as a game
engine feature, though the level of details settings can be previewed in
the viewport.
Reviewed By: moguri, nexyon, brecht
Differential Revision: http://developer.blender.org/D109
|
|
patch originally by Philipp Oeser with some edits.
|
|
Part of soc-2013-sketch_mesh branch
See: http://wiki.blender.org/index.php/User:Apinzonf/Doc:2.6/Manual/Modifiers/Deform/Laplacian_Deform
|
|
* Can optionally warp a segment (sets min/max default so it acts as old warp did).
* Can rotate the warp axis (old warp tool was limited to horizontal).
|
|
|
|
by Pedro Riera (priera), Andrey Dubravin, I also made some changes.
|
|
by Andrey Dubravin (daa)
|
|
This was caused by r.57812
There were two problems here:
1) vertex_group_vert_select_unlocked_poll() had faulty logic which meant that
it always failed when there were no vgroups present yet - the final return
always just fell through
2) Since the "Assign to New Groups" option was actually implemented using the
same operator as "Assign to Active Group" (just with an extra parameter set), if
the active group was locked, it was not possible to "Assign to New Group" (even
though a new group would not be locked).
|
|
|
|
|
|
from Kevin Mackay (yakca)
|
|
|
|
image
from Kevin Mackay (yakca)
|
|
|
|
|
|
* Ctrl-R = Add Active
* Ctrl-Shift-R = Add Passive
* Ctrl-Alt-R = Remove
|
|
- Drop group into 3d window now puts itself at mouse cursor location.
- Drop objects into 3d window now doesn't move the 3d cursor anymore.
Added new function ED_view3d_cursor3d_position() to handle this,
so the temporarily object-drop operator macro also could go away.
(Which was setting 3d cursor)
|
|
|
|
This operator (Ctrl-F) allows you to flip the lattice coordinates without
inverting the normals of meshes deformed by the lattice (or the lattice's
deformation space for that matter). Unlike the traditional mirror tool, this
tool is aware of the fact that the vertex order for lattice control points
matters, and that simply mirroring the coordinates will only cause the lattice
to have an inverted deform along a particular axis (i.e. it will be scaling by a
negative scaling factor along that axis).
The problems (as I discovered the other day) with having such an inverted
deformation space are that:
- the normals of meshes/objects inside that will be incorrect/flipped (and will
disappear in GLSL shading mode for instance)
- transforming objects deformed by the lattices will become really tricky and
counter-intuitive (e.g. rotate in opposite direction by asymmetric amounts to
get desired result)
- it is not always immediately obvious that problems have occurred
Specific use cases this operator is meant to solve:
1) You've created a lattice-based deformer for one cartoonish eye. Now you want
to make the second eye, but want to save some time crafting that basic shape
again but mirrored.
2) You've got an even more finely crafted setup for stretchy-rigs, and now need
to apply it to other parts of the rig.
Notes:
* I've implemented a separate operator for this vs extending/patching mirror
transform tool as it's easier to implement this way, but also because there are
still some cases where the old mirroring seems valid (i.e. you explicitly want
these sort of distortion effects).
* Currently this doesn't take selections into account, as it doesn't seem useful
to do so.
|
|
From: https://svn.blender.org/svnroot/bf-blender/branches/meshdata_transfer
Bachelor project at Narvik university collage (Norway).
By Ove M Henriksen (Cyborgmuppet)
Thesis will be published at Cyborgmuppets blender page.
Thanks for letting me participate!
|
|
engines require a limit of 4.
from Kesten Broughton (kestion)
Usage: In weight paint mode, select the mesh to have its weights culled. Click on "Limit Weights" button. A sub-panel will appear "Limit Number of Vertex Weights" with a slider field "Limit" which you can set to the appropriate level. The default level is 4, and it gets executed upon pressing "Limit Weights" so you will need to do an "undo" if your max bone limit is above 4. The checkbox "All Deform Weights" will consider all vertex weights, not just bone deform weights.
|
|
|
|
Added a convenience operator to the Follow Path constraint which adds a F-Curve
for the path (or the operator's "fixed position" value if no path is assigned),
with options for setting the start frame and length of motion. This makes it
easier for common users to just set up a quick follow-path animation where the
camera (e.g. flying around a set over certain number of frames).
A key advantage of this is that it takes care of the underlying math required
for setting up the generator curve accordingly (I've got some plans for making
this a bit friendlier to use later). Now, animating the paths is a one-click
operation, with the start and length properties able to be controlled using the
operator properties.
|
|
* Get rid of ED_object_add_generic_invoke() and all invoke callbacks using it, it was doing nothing exec() callbacks would not do. In fact, its only action (setting part of common add ops properties, like loc, layers, etc.) was needed too by direct exec call, so it was done twice in case of using invoke()!
* Replace custom invoke code for metaballs by WM_menu_invoke helper (as already used by lamps).
* Add a new OBJECT_OT_empty_add op, to allow direct addition of empties of a given drawtype.
* And some general code cleanup (like trailing spaces, empty lines, ...).
Did quite a bunch of tests/verifications, but obviously could not tackle all possible scenarios... Anyway, if any, bugs should arize quite quickly (but I don’t expect any! :p ).
|
|
|
|
|
|
|
|
myself.
see:
http://wiki.blender.org/index.php/User:Nazg-gul/MaskEditor
note - mask editing tools need continued development, feather option is not working 100%
|
|
was messy)
|
|
|
|
* The operator creates bones for each input edge (does not subdivide
them like the skin operator does), adds a fake root bone for skin
roots with multiple children.
* The operator adds vertex weight groups to the original mesh.
* Make copy_object_transform() public, used to match the armature
object to the mesh object.
Skin modifier documentation:
http://wiki.blender.org/index.php/User:Nicholasbishop/SkinModifier
|
|
* Add operator to mark selected vertices as skin roots.
* Add operator to mark/clear selected vertices as loose.
* Add operator to equalize skin radii.
Skin modifier documentation:
http://wiki.blender.org/index.php/User:Nicholasbishop/SkinModifier
|
|
|