Age | Commit message (Collapse) | Author |
|
|
|
In rare cases, it's possible for an object to have edit-mode data
without it's Object.mode set to edit-mode.
This could happen with undo, part of fix for: T85974.
|
|
Following the naming conventions defined in T56648, where in this
instance there were still a few remaining uses of the old term.
Differential Revision: https://developer.blender.org/D9817
|
|
Changes include using proper and consistent grammar, simplifying
phrasing, using correct terminology, and not including python API
identifiers in tooltips.
Differential Revision: https://developer.blender.org/D9924
|
|
|
|
Since "Applied Modifier" was always added last, it obscured more important
messages when using the shortcut to delete modifiers. The purpose of the
report when using the shortcut was to make it clear that something
happened. Since another report does that anyway, only display the
"Applied Modifier" report if the report list length hasn't changed.
|
|
|
|
|
|
|
|
|
|
|
|
Baking vertex colors per-corner leads to unwanted discontinuities when there is
sampling noise, for example in ambient occlusion or with a bevel shader node for
normals. For this reason the code used to always average results per-vertex.
However when using split normals, multiple materials or UV islands, we do want to
preserve discontinuities. So now bake per corner, but make sure the sampling seed
is shared for vertices.
Fix T85550: vertex color baking crash with split normals, Ref D10399
Fix T84663: vertex color baking blending at UV seams
|
|
Remove redundant headers using
`./source/tools/utils_maintenance/code_clean.py`
Reviewed By: jmonteath
Ref D10364
|
|
|
|
Approximately 91 spelling corrections, almost all in comments.
Differential Revision: https://developer.blender.org/D10288
Reviewed by Harley Acheson
|
|
|
|
In two cases the percentage property was actually used incorrectly, as
pointed out in T82070. The range was [0, 1], but the properties were still
displayed as percentages.
There is a preference to control whether to display factors or
percentages, so it usually doesn't make sense to manually define
properties as percentages.
Resolves T82070
Differential Revision: https://developer.blender.org/D9344
|
|
When multiple objects were in edit-mode,
only the active object would exit edit-mode.
|
|
|
|
Now light baking should match the render.
|
|
|
|
When multiple objects were in edit-mode,
only the active object would exit edit-mode.
|
|
|
|
|
|
Regression from d8992192e5512380f57433df113f3e3f8b22f7cb
The original code relied on having a separate edit-object pointer
than the active object.
Use a utility function to avoid code duplication as there are
other areas that have similar functionality.
|
|
|
|
Differential Revision: https://developer.blender.org/D10125
|
|
- Rename to "Link/Transfer Data".
- Move Mesh Data Transfer operators here from the Relations sub-menu.
- Clarify which operations links to, copies or transfers/projects
data using Link, Copy and Transfer leading text.
- Re-order contents to fit each category and add separators.
- Add enum tool-tips.
Reviewed By: Blendify, campbellbarton pablovazquez, mont29
Ref D10090
|
|
Things like pointers to particle systems, or softbody data being stored
outside of its modifier, make it impossible for internal modifier copy
data code to be self-contained currently. It requires extra processing.
In existing code this was handled in several different places, in
several ways, and alltogether fairly inconsistently. Some cases were
even not properly handled, causing e.g. crashes as in T82945.
This commit addresses those issues by:
* Adding comments about the hackish/unsafe parts `psys` implies when
copying some modifier data (since we need to ensure particle system
copying and remapping of those pointers separately).
* Adding as-best-as-possible handling of those cases to
`BKE_object_copy_modifier` (note that it remains fragile, but is
expected to behave 'good enough' in any practical usecase).
* Remove special handling for specific editor code
(`copy_or_reuse_particle_system`). This should never have been
accepted in ED code area, and is now handled by
`BKE_object_copy_modifier`.
* Factorize copying of the whole modifier stack into new
`BKE_object_modifier_stack_copy`, now used by both `object_copy_data`
and `BKE_object_link_modifiers`.
Note that this implies that `BKE_object_copy_modifier` and
`BKE_object_copy_gpencil_modifier` are now to be used exclusively to
copy single modifiers. Full modifier stack copy should always use
`BKE_object_modifier_stack_copy` instead.
Fix T82945: Crash when dragging modifiers in Outliner.
Maniphest Tasks: T82945
Differential Revision: https://developer.blender.org/D10148
|
|
Things like pointers to particle systems, or softbody data being stored
outside of its modifier, make it impossible for internal modifier copy
data code to be self-contained currently. It requires extra processing.
In existing code this was handled in several different places, in
several ways, and alltogether fairly inconsistently. Some cases were
even not properly handled, causing e.g. crashes as in T82945.
This commit addresses those issues by:
* Adding comments about the hackish/unsafe parts `psys` implies when
copying some modifier data (since we need to ensure particle system
copying and remapping of those pointers separately).
* Adding as-best-as-possible handling of those cases to
`BKE_object_copy_modifier` (note that it remains fragile, but is
expected to behave 'good enough' in any practical usecase).
* Remove special handling for specific editor code
(`copy_or_reuse_particle_system`). This should never have been
accepted in ED code area, and is now handled by
`BKE_object_copy_modifier`.
* Factorize copying of the whole modifier stack into new
`BKE_object_modifier_stack_copy`, now used by both `object_copy_data`
and `BKE_object_link_modifiers`.
Note that this implies that `BKE_object_copy_modifier` and
`BKE_object_copy_gpencil_modifier` are now to be used exclusively to
copy single modifiers. Full modifier stack copy should always use
`BKE_object_modifier_stack_copy` instead.
Fix T82945: Crash when dragging modifiers in Outliner.
Maniphest Tasks: T82945
Differential Revision: https://developer.blender.org/D10148
|
|
When dragging an object into the 3D View, e.g. from the Outliner or the Asset
Browser, other objects wouldn't get deselected. That differs from what other
drop operations do, which create a new object. They deselect other objects in a
lower-level function, which happens to not be called for just dropping objects.
So I guess this is an oversight.
Old behavior was also a bit annoying because users seem to expect this to
deselect.
|
|
|
|
Outliner display under 'Animation' > 'NLA Tracks' was not updating in
the following cases:
- adding strips
- removing strips
- duplicating strips (possibly to different track)
- swapping strips
- reordering tracks
- changing strip order by translating
- translating strips between tracks
- renaming tracks
In the case of deleting strips/tracks, this was also resulting in a use-
after-free error in Outliner drawing code (this was reported specifically
in T84586).
Most of these operators already sent a ND_NLA|NA_EDITED notifier, but the
Outliner is not listening to these. Listening to NA_EDITED is also not
what we want since this also happens a lot in cases irrelevant to the
Outliner. Now be a bit more specific and send ND_NLA|NA_ADDED / ND_NLA|
NA_REMOVED or a new ND_NLA_ORDER (to distinguish from NA_EDITED
'only' - where a redraw is not neccessary) and listen to these from the
Outliner.
(note: places that were listening to ND_NLA|NA_EDITED before are also
listening to NA_ADDED or NA_REMOVED, so changing NA_EDITED should not be
a problem here)
(note 2: for cases like swapping tracks/strips order, NA_ADDED or
NA_REMOVED does not make sense, neither can we use NA_EDITED [since we
dont want to listen to this], so in this case an additional ND_NLA_ORDER
is now sent)
(note 3: in nla transform code, this is now always sent on confirm. There
are cases were the notifier would not be needed, but checking exactly all
cases were it actually would be needed seems overkill [history of D10073
has example code to check if strips moved between tracks])
Maniphest Tasks: T84586
Differential Revision: https://developer.blender.org/D10073
|
|
When using grease pencil for drawing Storyboards, it's very common to require a transform of the layers. This transform can be done using the offset modifier, but in some cases, the scene requires a lot of modifiers and makes the file hard to work.
This new feature adds a transforms Location, Rotation and Scale at Layer level, and allows to transform the layer without using a modifier, keeping the scene more clean.
{F9480695}
This feature was suggested by @pepeland after receiving feedback from several artists.
Also, done some code cleanup and rename some functions to get a better naming.
Maniphest Tasks: T83660
Differential Revision: https://developer.blender.org/D9761
|
|
This commit changes the check at the beginning of the
"Make Instances Real" operator to account for the instances
created by nodes modifiers in the modifier stack.
Differential Revision: https://developer.blender.org/D10059
|
|
|
|
|
|
|
|
|
|
- Use the name "Point Cloud" instead of "Pointcloud"
- Fix a typo in UV_OT_smart_project.
- Use the name "Install Light" to for the installation
operator for MatCaps, HDRIs, and Studio Lights.
Fixes T83585, T65291, and T54921
Differential Revision: https://developer.blender.org/D9867
|
|
Since the introduction in rB2221389d6e8e, baking to vertex colors would
still check for the existence of a valid UVMap (as if baking to image
textures).
Now check for vertex colors instead if target is
R_BAKE_TARGET_VERTEX_COLORS.
Maniphest Tasks: T84416
Differential Revision: https://developer.blender.org/D10006
|
|
When using "Make Links"->"Materials" regular materials could be linked
onto grease pencil objects. This caused a number of issues.
The fix changes the `allow_make_links_data` function to make sure that
if one object is of type `OB_GPENCIL`, the other has to be aswell.
Reviewed By: antoniov
Maniphest Tasks: T84420
Differential Revision: https://developer.blender.org/D10014
|
|
'Caused'/revealed by rBd29a720c45e5: Operators that fully re-create the
mesh would previously rely on `sculpt_update_object` called from update
code to get required sculpt-specific data layers re-added to the new
mesh.
Now instead put all code adding data to orig mesh for sculpt purpose
into a new util function (`BKE_sculpt_ensure_orig_mesh_data`), and call
that function when entering sculpt mode, and from voxel remesher code.
This is contonuing effort to more clearly separate orig data from evaluated
data handling/usage in sculpt code.
TODO: there are likely other code paths that would need to call that
new function?
Reviewers: @sergey, @pablodp606
Subscribers:
|
|
Steps to reproduce were:
* Drag object icon from the Outliner into the 3D view (or an object asset from
the Asset Browser)
* Open the "Adjust Last Operation" panel
* Edit options in there - the object would move to the mouse location
The same issue happens with collection instance and object data adding (e.g.
via drag & drop). This patch addresses them too.
The operator used the event state stored in the window. This shouldn't be
accessed from the operator execute callback generally which happened here.
Especially not if the operator supports editing properties.
|
|
|
|
Use the BMesh symmetrize operator instead of using the modifier code.
While we could support shape-keys with the existing code used by the
mirror modifier, we'd need to add code-paths for evaluated mesh & bmesh
conversion to handle shape-keys differently just for this one case,
since we want to avoid copying & processing shape-keys layers for
evaluated meshes in general.
|
|
|
|
|
|
These two operators (one for grease pencil, one for other objects)
copy a single modifier from the active object to all selected objects.
The operators are exposed in the dropdown menus in modifier headers.
Note that It's currently possible to drag and drop modifiers between
objects in the outliner, but that only works for dragging to one object
at a time. Modifiers can also be copied with the "Make Links" operator,
but that copies *all* modifiers rather than just one. The placement
and scope of these new operators allow for more useful poll messages
and error messages as well.
Every object type that supports modifiers is supported. Although hook
and collision modifiers aren't supported because of an unexplained
comment in `BKE_object_copy_modifier`, other than that, every modifier
type is supported, including particle systems, nodes modifiers, etc.
The new modifiers are set active, which required two small tweaks to
`object.c` and `particle.c`.
Reviewed By: Hans Goudey (with additional edits)
Differential Revision: https://developer.blender.org/D9537
|
|
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
|