| Age | Commit message (Collapse) | Author |
|---|
|
Correction of U.dpi to hold actual monitor DPI. Simplify font sizing by
omitting DPI as API argument, always using 72 internally.
See D15961 for more details.
Differential Revision: https://developer.blender.org/D15961
Reviewed by Campbell Barton
|
|
Using the attribute name semantics from T97452, this patch moves the
selection status of mesh elements from the `SELECT` of vertices, and
edges, and the `ME_FACE_SEL` of faces to generic boolean attribute
Storing this data as generic attributes can significantly simplify and
improve code, as described in T95965.
The attributes are called `.select_vert`, `.select_edge`, and
`.select_poly`. The `.` prefix means they are "UI attributes",so they
still contain original data edited by users, but they aren't meant to
be accessed procedurally by the user in arbitrary situations. They are
also be hidden in the spreadsheet and the attribute list.
Until 4.0, the attributes are still written to and read from the mesh
in the old way, so neither forward nor backward compatibility are
affected. This means memory requirements will be increased by one byte
per element when selection is used. When the flags are removed
completely, requirements will decrease.
Further notes:
* The `MVert` flag is empty at runtime now, so it can be ignored.
* `BMesh` is unchanged, otherwise the change would be much larger.
* Many tests have slightly different results, since the selection
attribute uses more generic propagation. Previously you couldn't
really rely on edit mode selections being propagated procedurally.
Now it mostly works as expected.
Similar to 2480b55f216c
Ref T95965
Differential Revision: https://developer.blender.org/D15795
|
|
|
|
|
|
|
|
Disambiguate:
- Lower / Upper (case)
- Spray (ocean modifier)
- Keep Original (clip, grease pencil, object)
- Screen [space] (inside some enum items, mostly)
- Cast Shadow ("shadow that is cast", not "to cast a shadow")
Extract:
- Line Art Light Reference Near and Far
- Mesh vertex attribute domain: Vertex
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15938
|
|
Whether faces are hidden and face sets are orthogonal concepts, but
currently sculpt mode stores them together in the face set array.
This means that if anything is hidden, there must be face sets,
and if there are face sets, we have to keep track of what is hidden.
In other words, it adds a bunch of redundant work and state tracking.
On the user level it's nice that face sets and hiding are consistent,
but we don't need to store them together to accomplish that.
This commit uses the `".hide_poly"` attribute from rB2480b55f216c to
read and change hiding in sculpt mode. Face sets don't need to be
negative anymore, and a bunch of "face set <-> hide status" conversion
can be removed. Plus some other benefits:
- We don't need to allocate either array quite as much.
- The hide status can be read from 1/4 the memory as face sets.
- Updates when entering or exiting sculpt mode can be removed.
- More opportunities for early-outs when nothing is hidden.
- Separating concerns makes sculpt code more obvious.
- It will be easier to convert face sets into a generic int attribute.
Differential Revision: https://developer.blender.org/D15950
|
|
When a change happens which invalidates view layers the syncing will be postponed until the first usage.
This will improve importing or adding many objects in a single operation/script.
`BKE_view_layer_need_resync_tag` is used to tag the view layer to be out of sync. Before accessing
`BKE_view_layer_active_base_get`, `BKE_view_layer_active_object_get`, `BKE_view_layer_active_collection`
or `BKE_view_layer_object_bases` the caller should call `BKE_view_layer_synced_ensure`.
Having two functions ensures that partial syncing could be added as smaller patches in the future. Tagging a
view layer out of sync could be replaced with a partial sync. Eventually the number of full resyncs could be
reduced. After all tagging has been replaced with partial syncs the ensure_sync could be phased out.
This patch has been added to discuss the details and consequences of the current approach. For clarity
the call to BKE_view_layer_ensure_sync is placed close to the getters.
In the future this could be placed in more strategical places to reduce the number of calls or improve
performance. Finding those strategical places isn't that clear. When multiple operations are grouped
in a single script you might want to always check for resync.
Some areas found that can be improved. This list isn't complete.
These areas aren't addressed by this patch as these changes would be hard to detect to the reviewer.
The idea is to add changes to these areas as a separate patch. It might be that the initial commit would reduce
performance compared to master, but will be fixed by the additional patches.
**Object duplication**
During object duplication the syncing is temporarily disabled. With this patch this isn't useful as when disabled
the view_layer is accessed to locate bases. This can be improved by first locating the source bases, then duplicate
and sync and locate the new bases. Will be solved in a separate patch for clarity reasons ({D15886}).
**Object add**
`BKE_object_add` not only adds a new object, but also selects and activates the new base. This requires the
view_layer to be resynced. Some callers reverse the selection and activation (See `get_new_constraint_target`).
We should make the selection and activation optional. This would make it possible to add multiple objects
without having to resync per object.
**Postpone Activate Base**
Setting the basact is done in many locations. They follow a rule as after an action find the base and set
the basact. Finding the base could require a resync. The idea is to store in the view_layer the object which
base will be set in the basact during the next sync, reducing the times resyncing needs to happen.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15885
|
|
Related to {D15885} that requires scene parameter
to be added in many places. To speed up the review process
the adding of the scene parameter was added in a separate
patch.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15930
|
|
editor.
Tagging depsgraph for relation rebuild does not replace tagging IDs for update.
|
|
corresponding data layers and using their values for computations.
Avoiding that should increase performance in many operations that
would otherwise have to read, write, or propagate these values.
It also means decreased memory usage-- not just for sculpt mode
but for any mesh that was in sculpt mode. Previously the mask, face set,
and hide status layers were *always* allocated by sculpt mode.
Here are a few basic tests when masking and face sets are not used:
| Test | Before | After |
| Subsurf Modifier | 148 ms | 126 ms |
| Sculpt Overlay Extraction | 24 ms every redraw | 0 ms |
| Memory usage | 252 MB | 236 MB |
I wouldn't expect any difference when they are used though.
The code changes are mostly just making sculpt features safe for when
the layers aren't stored, and some changes to the conversion to and
from the hide layers. Use of the ".hide_poly" attribute replaces testing
whether face sets are negative in many places.
Differential Revision: https://developer.blender.org/D15937
|
|
- Remove "take ownership" argument which was confusing and always true
- The argument made ownership very confusing
- Better to avoid boolean arguments that switch a function's purpose
- Remove "mask" argument which was basically wrong and not used properly
- "EVERYTHING" was used because developers are wary of removing data
- Instead use `CD_MASK_MESH` for its purpose of original mesh data
- Remove use of shallow copied temporary mesh, which is unnecessary now
- Split shape key processing into separate functions and use C++ types
- Copy fields explicitly rather than using memcpy for the whole struct
- Use higher level functions and avoid redundant code
- The whole idea is pretty simple and can be built from standard logic
- Adjust `CustomData` logic to be consistent with "assign" expectations
- Clear the layer data from the source, and moves the anonymous ID
Differential Revision: https://developer.blender.org/D15857
|
|
Also use '_num' suffix instead of '_tot'.
|
|
Add BKE_object_defgroup_flip_map_unlocked which excludes locked groups
from the flip-map.
Reviewed By: zanqdo, campbellbarton
Ref D15317
|
|
Rename, add comments, and use flag in the depsgraph to ensure the logic
matches.
Differential Revision: https://developer.blender.org/D15883
|
|
Replace `mesh_attributes`, `mesh_attributes_for_write` and the point
cloud versions with methods on the `Mesh` and `PointCloud` types.
This makes them friendlier to use and improves readability.
Differential Revision: https://developer.blender.org/D15907
|
|
Follows existing naming for the most part, also use "num" as a suffix
in some instances (following our naming conventions).
|
|
Note that there are still some references to proxies left, in some cases
it's unclear if the code related to the comment is even still relevant,
this goes beyond mere cleanup to address then.
|
|
Use `verts` instead of `vertices` and `polys` instead of `polygons`
in the API added in 05952aa94d33eeb50. This aligns better with
existing naming where the shorter names are much more common.
|
|
Broken in rB2480b55f216c3137 by incorrectly converting a boolean
expression. There is also another suspect expression nearby.
|
|
For copy-on-write, we want to share attribute arrays between meshes
where possible. Mutable pointers like `Mesh.mvert` make that difficult
by making ownership vague. They also make code more complex by adding
redundancy.
The simplest solution is just removing them and retrieving layers from
`CustomData` as needed. Similar changes have already been applied to
curves and point clouds (e9f82d3dc7ee, 410a6efb747f). Removing use of
the pointers generally makes code more obvious and more reusable.
Mesh data is now accessed with a C++ API (`Mesh::edges()` or
`Mesh::edges_for_write()`), and a C API (`BKE_mesh_edges(mesh)`).
The CoW changes this commit makes possible are described in T95845
and T95842, and started in D14139 and D14140. The change also simplifies
the ongoing mesh struct-of-array refactors from T95965.
**RNA/Python Access Performance**
Theoretically, accessing mesh elements with the RNA API may become
slower, since the layer needs to be found on every random access.
However, overhead is already high enough that this doesn't make a
noticible differenc, and performance is actually improved in some
cases. Random access can be up to 10% faster, but other situations
might be a bit slower. Generally using `foreach_get/set` are the best
way to improve performance. See the differential revision for more
discussion about Python performance.
Cycles has been updated to use raw pointers and the internal Blender
mesh types, mostly because there is no sense in having this overhead
when it's already compiled with Blender. In my tests this roughly
halves the Cycles mesh creation time (0.19s to 0.10s for a 1 million
face grid).
Differential Revision: https://developer.blender.org/D15488
|
|
|
|
This patch is a cleanup required before refactoring the view layer syncing
process {T73411}.
* Remove FIRSTBASE.
* Remove LASTBASE.
* Remove BASACT.
* Remove OBEDIT_FROM_WORKSPACE.
* Replace OBACT with BKE_view_layer_active_object.
* Replace OBEDIT_FROM_VIEW_LAYER with BKE_view_layer_edit_object.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15799
|
|
This patch moves material indices from the mesh `MPoly` struct to a
generic integer attribute. The builtin material index was already
exposed in geometry nodes, but this makes it a "proper" attribute
accessible with Python and visible in the "Attributes" panel.
The goals of the refactor are code simplification and memory and
performance improvements, mainly because the attribute doesn't have
to be stored and processed if there are no materials. However, until
4.0, material indices will still be read and written in the old
format, meaning there may be a temporary increase in memory usage.
Further notes:
* Completely removing the `MPoly.mat_nr` after 4.0 may require
changes to DNA or introducing a new `MPoly` type.
* Geometry nodes regression tests didn't look at material indices,
so the change reveals a bug in the realize instances node that I fixed.
* Access to material indices from the RNA `MeshPolygon` type is slower
with this patch. The `material_index` attribute can be used instead.
* Cycles is changed to read from the attribute instead.
* BMesh isn't changed in this patch. Theoretically it could be though,
to save 2 bytes per face when less than two materials are used.
* Eventually we could use a 16 bit integer attribute type instead.
Ref T95967
Differential Revision: https://developer.blender.org/D15675
|
|
|
|
From the 3DView code has basically no knowledge of collection hierarchy,
so we can either not remap any local usage of linked objects that are
being overridden, or remap them in all their local collections.
The second behavior makes most sense in the vast majority of cases.
Note that this was only an issue when directly linking and overriding
objects, not when doing so through collections.
|
|
While missing the break before a default that only breaks isn't
an error, it means adding new cases needs to remember to add the
break for an existing case, changing the default case will also
result in an unintended fall-through.
Also avoid `default:;` and add an explicit break.
|
|
When allocating new `CustomData` layers, often we do redundant
initialization of arrays. For example, it's common that values are
allocated, set to their default value, and then set to some other
value. This is wasteful, and it negates the benefits of optimizations
to the allocator like D15082. There are two reasons for this. The
first is array-of-structs storage that makes it annoying to initialize
values manually, and the second is confusing options in the Custom Data
API. This patch addresses the latter.
The `CustomData` "alloc type" options are rearranged. Now, besides
the options that use existing layers, there are two remaining:
* `CD_SET_DEFAULT` sets the default value.
* Usually zeroes, but for colors this is white (how it was before).
* Should be used when you add the layer but don't set all values.
* `CD_CONSTRUCT` refers to the "default construct" C++ term.
* Only necessary or defined for non-trivial types like vertex groups.
* Doesn't do anything for trivial types like `int` or `float3`.
* Should be used every other time, when all values will be set.
The attribute API's `AttributeInit` types are updated as well.
To update code, replace `CD_CALLOC` with `CD_SET_DEFAULT` and
`CD_DEFAULT` with `CD_CONSTRUCT`. This doesn't cause any functional
changes yet. Follow-up commits will change to avoid initializing
new layers where the correctness is clear.
Differential Revision: https://developer.blender.org/D15617
|
|
|
|
|
|
Fix for running operators outside of expected contexts.
- UI_OT_view_drop (poll)
- UI_OT_view_item_rename (poll)
- OBJECT_OT_gpencil_modifier_move_to_index
- OBJECT_OT_modifier_move_to_index
- OBJECT_OT_geometry_nodes_input_attribute_toggle
- OBJECT_OT_geometry_node_tree_copy_assign
- OBJECT_OT_shaderfx_remove
- OBJECT_OT_shaderfx_copy
- POSE_OT_relax (& other pose slide operators).
|
|
|
|
|
|
|
|
|
|
on Clear, general cleanup.
Inconsistencies in update/tagging code between different code doing the
same 'Clear. liboverride operation lead to crashes in some cases.
Unify deg tagging and WM notifiers accross the three editor-level
codepaths performing the common Make/Reset/Clear operations.
Preserve if possible the active object accross Clear operation.
Several cleanup/rename/re-arangement of code to make it more consistent.
|
|
|
|
Apply transform failed to clear delta quaternion & axis-angle rotation.
|
|
Ref D15710, this avoids unnecessary sequencer updates for some operations.
|
|
Conflicts:
release/scripts/startup/bl_ui/space_userpref.py
|
|
Add missing labels, and also add tooltips.
Unfortunately there is no way currently to extract two messages from a
single 'function' call, so unless those type of macros become very
widely used, would keep it as manual tagging.
Also disambiguate `case` in text context, pretty sure English is one of
the very rare languages to use this word for character case too.
|
|
|
|
This behavior is now implicitely controlled by the 'Make' operations,
based either on context or selected items.
|
|
|
|
With the ultimate goal of simplifying drawing and evaluation,
this patch makes the following changes and removes code:
- Use `Mesh` instead of `DispList` for evaluated basis metaballs.
- Remove all `DispList` drawing code, which is now unused.
- Simplify code that converts evaluated metaballs to meshes.
- Store the evaluated mesh in the evaluated geometry set.
This has the following indirect benefits:
- Evaluated meshes from metaball objects can be used in geometry nodes.
- Renderers can ignore evaluated metaball objects completely
- Cycles rendering no longer has to convert to mesh from `DispList`.
- We get closer to removing `DispList` completely.
- Optimizations to mesh rendering will also apply to metaball objects.
The vertex normals on the evaluated mesh are technically invalid;
the regular calculation wouldn't reproduce them. Metaball objects
don't support modifiers though, so it shouldn't be a problem.
Eventually we can support per-vertex custom normals (T93551).
Differential Revision: https://developer.blender.org/D14593
|
|
|
|
These macros don't compile in C++ because of taking an address of a
temporary and use of designated initializers. Besides that, using
functions can improve debugging and type safety.
Differentil Revision: https://developer.blender.org/D15693
|
|
|
|
|
|
|
