| Age | Commit message (Collapse) | Author |
|---|
|
Remove redundant headers using
`./source/tools/utils_maintenance/code_clean.py`
Reviewed By: jmonteath
Ref D10364
|
|
Remove DNA headers, using forward declarations where possible.
Also removed duplicate header, header including it's self
and unnecessary inclusion of libc system headers from BKE header.
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors` module.
No functional changes.
|
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
Side-reported in T70505.
Code did not ensure deleted object was removed from the RBW constraints
collection, leading to some invalid status (object in constraints
collection but without relevant contraints data).
Also fixed another issue - code deleting RBW objects would try to remove
any constraint one using it as target, in a very bad and broken way,
since you cannot iterate over objects of a collection while removing
some... Now instead just NULLify relevant pointers... I hope it works,
otherwise we'll have to take a different approach.
Needless to stress again how weak the whole RBW code is in general, and
regarding same object being used by RBW in more than one scene in particular,
that is known broken situation anyway.
|
|
uses a referenced rigid body world.
Poll functions were not correct here, we cannot make objects part of
rigidbody sim if the RB collection is a linked one...
|
|
This change ensures that operators which needs access to evaluated data
first makes sure there is a dependency graph.
Other accesses to the dependency graph made it more explicit about
whether they just need a valid dependency graph pointer or whether they
expect the graph to be already evaluated.
This replaces OPTYPE_USE_EVAL_DATA which is now removed.
Some general rules about usage of accessors:
- Drawing is expected to happen from a fully evaluated dependency graph.
There is now a function to access it, which will in the future control
that dependency graph is actually evaluated.
This check is not yet done because there are some things to be taken
care about first: for example, post-update hooks might leave scene in
a state where something is still tagged for update.
- All operators which needs to access evaluated state must use
CTX_data_ensure_evaluated_depsgraph().
This function replaces OPTYPE_USE_EVAL_DATA.
The call is generally to be done in the very beginning of the
operator, prior other logic (unless this is some comprehensive
operator which might or might not need access to an evaluated state).
This call is never to be used from a loop.
If some utility function requires evaluated state of dependency graph
the graph is to be passed as an explicit argument. This way it is
clear that no evaluation happens in a loop or something like this.
- All cases which needs to know dependency graph pointer, but which
doesn't want to actually evaluate it can use old-style function
CTX_data_depsgraph_pointer(), assuming that underlying code will
ensure dependency graph is evaluated prior to accessing it.
- The new functions are replacing OPTYPE_USE_EVAL_DATA, so now it is
explicit and local about where dependency graph is being ensured.
This commit also contains some fixes of wrong usage of evaluation
functions on original objects. Ideally should be split out, but in
reality with all the APIs being renamed is quite tricky.
Fixes T67454: Blender crash on rapid undo and select
Speculation here is that sometimes undo and selection operators are
sometimes handled in the same event loop iteration, which leaves
non-evaluated dependency graph.
Fixes T67973: Crash on Fix Deforms operator
Fixes T67902: Crash when undo a loop cut
Reviewers: brecht
Reviewed By: brecht
Subscribers: lichtwerk
Maniphest Tasks: T67454
Differential Revision: https://developer.blender.org/D5343
|
|
Previously settings were removed, now add to the rigid body world automatically
even if it's a bit ill defined, since this is confusing for users.
Fundamentally the concept of a rigid body world collection could be revised, and
left only as an optional thing.
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
Needed for clan-format not to wrap onto one line.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
rigidbody_get_mesh() needs an evaluated object
Reviewers: sergey, brecht
Maniphest Tasks: T59884
Differential Revision: https://developer.blender.org/D4125
|
|
There were at least three copies of those:
- OB_RECALC* family of flags, which are rudiment of an old
dependency graph system.
- PSYS_RECALC* which were used by old dependency graph system
as a separate set since the graph itself did not handle
particle systems.
- DEG_TAG_* which was used to tag IDs.
Now there is a single set, which defines what can be tagged
and queried for an update. It also has some aggregate flags
to make queries simpler.
Lets once and for all solve the madness of those flags, stick
to a single set, which will not overlap with anything or require
any extra conversion.
Technically, shouldn't be measurable user difference, but some
of the agregate flags for few dependency graph components did
change.
Fixes T58632: Particle don't update rotation settings
|
|
That kind of implicit includes should really only be done when totally,
absolutely necessary, and ideally only with rather simple 'second-level'
headers.
Otherwise not being explicit with includes always end up biting in
unexpected ways...
|
|
|
|
|
|
|
|
I moved some code from ED_rigidbody_object_remove() to
BKE_rigidbody_remove_object(), so that calling the latter doesn't leave
the object in rbw->group (causing a crash later on when rebuilding the
depsgraph).
|
|
This prevents it from disappearing when the blend file is saved.
|
|
|
|
OVERVIEW
* In 2.7 terminology, all layers and groups are now collection datablocks.
* These collections are nestable, linkable, instanceable, overrideable, ..
which opens up new ways to set up scenes and link + override data.
* Viewport/render visibility and selectability are now a part of the collection
and shared across all view layers and linkable.
* View layers define which subset of the scene collection hierarchy is excluded
for each. For many workflows one view layer can be used, these are more of an
advanced feature now.
OUTLINER
* The outliner now has a "View Layer" display mode instead of "Collections",
which can display the collections and/or objects in the view layer.
* In this display mode, collections can be excluded with the right click menu.
These will then be greyed out and their objects will be excluded.
* To view collections not linked to any scene, the "Blender File" display mode
can be used, with the new filtering option to just see Colleciton datablocks.
* The outliner right click menus for collections and objects were reorganized.
* Drag and drop still needs to be improved. Like before, dragging the icon or
text gives different results, we'll unify this later.
LINKING AND OVERRIDES
* Collections can now be linked into the scene without creating an instance,
with the link/append operator or from the collections view in the outliner.
* Collections can get static overrides with the right click menu in the outliner,
but this is rather unreliable and not clearly communicated at the moment.
* We still need to improve the make override operator to turn collection instances
into collections with overrides directly in the scene.
PERFORMANCE
* We tried to make performance not worse than before and improve it in some
cases. The main thing that's still a bit slower is multiple scenes, we have to
change the layer syncing to only updated affected scenes.
* Collections keep a list of their parent collections for faster incremental
updates in syncing and caching.
* View layer bases are now in a object -> base hash to avoid quadratic time
lookups internally and in API functions like visible_get().
VERSIONING
* Compatibility with 2.7 files should be improved due to the new visibility
controls. Of course users may not want to set up their scenes differently
now to avoid having separate layers and groups.
* Compatibility with 2.8 is mostly there, and was tested on Eevee demo and Hero
files. There's a few things which are know to be not quite compatible, like
nested layer collections inside groups.
* The versioning code for 2.8 files is quite complicated, and isolated behind
#ifdef so it can be removed at the end of the release cycle.
KNOWN ISSUES
* The G-key group operators in the 3D viewport were left mostly as is, they
need to be modified still to fit better.
* Same for the groups panel in the object properties. This needs to be updated
still, or perhaps replaced by something better.
* Collections must all have a unique name. Less restrictive namespacing is to
be done later, we'll have to see how important this is as all objects within
the collections must also have a unique name anyway.
* Full scene copy and delete scene are exactly doing the right thing yet.
Differential Revision: https://developer.blender.org/D3383
https://code.blender.org/2018/05/collections-and-groups/
|
|
- Undo that changes modes currently asserts,
since undo is now screen data.
Most likely we will change how object mode and workspaces work
since it's not practical/maintainable at the moment.
- Removed view_layer from particle settings
(wasn't needed and complicated undo).
|
|
|
|
|
|
Practically all access to enum data is read-only.
|
|
BKE_depsgraph.h
This removes BKE_depsgraph.h and depsgraph.c
|
|
Design Documents
----------------
* https://wiki.blender.org/index.php/Dev:2.8/Source/Layers
* https://wiki.blender.org/index.php/Dev:2.8/Source/DataDesignRevised
User Commit Log
---------------
* New Layer and Collection system to replace render layers and viewport layers.
* A layer is a set of collections of objects (and their drawing options) required for specific tasks.
* A collection is a set of objects, equivalent of the old layers in Blender. A collection can be shared across multiple layers.
* All Scenes have a master collection that all other collections are children of.
* New collection "context" tab (in Properties Editor)
* New temporary viewport "collections" panel to control per-collection
visibility
Missing User Features
---------------------
* Collection "Filter"
Option to add objects based on their names
* Collection Manager operators
The existing buttons are placeholders
* Collection Manager drawing
The editor main region is empty
* Collection Override
* Per-Collection engine settings
This will come as a separate commit, as part of the clay-engine branch
Dev Commit Log
--------------
* New DNA file (DNA_layer_types.h) with the new structs
We are replacing Base by a new extended Base while keeping it backward
compatible with some legacy settings (i.e., lay, flag_legacy).
Renamed all Base to BaseLegacy to make it clear the areas of code that
still need to be converted
Note: manual changes were required on - deg_builder_nodes.h, rna_object.c, KX_Light.cpp
* Unittesting for main syncronization requirements
- read, write, add/copy/remove objects, copy scene, collection
link/unlinking, context)
* New Editor: Collection Manager
Based on patch by Julian Eisel
This is extracted from the layer-manager branch. With the following changes:
- Renamed references of layer manager to collections manager
- I doesn't include the editors/space_collections/ draw and util files
- The drawing code itself will be implemented separately by Julian
* Base / Object:
A little note about them. Original Blender code would try to keep them
in sync through the code, juggling flags back and forth. This will now
be handled by Depsgraph, keeping Object and Bases more separated
throughout the non-rendering code.
Scene.base is being cleared in doversion, and the old viewport drawing
code was poorly converted to use the new bases while the new viewport
code doesn't get merged and replace the old one.
Python API Changes
------------------
```
- scene.layers
+ # no longer exists
- scene.objects
+ scene.scene_layers.active.objects
- scene.objects.active
+ scene.render_layers.active.objects.active
- bpy.context.scene.objects.link()
+ bpy.context.scene_collection.objects.link()
- bpy_extras.object_utils.object_data_add(context, obdata, operator=None, use_active_layer=True, name=None)
+ bpy_extras.object_utils.object_data_add(context, obdata, operator=None, name=None)
- bpy.context.object.select
+ bpy.context.object.select = True
+ bpy.context.object.select = False
+ bpy.context.object.select_get()
+ bpy.context.object.select_set(action='SELECT')
+ bpy.context.object.select_set(action='DESELECT')
-AddObjectHelper.layers
+ # no longer exists
```
|
|
Being granular means we need to re-build depsgraph a bit more often..
The issue was caused by rigidbody requiring some special nodes to
handle physics which were not created with just tagging object for
update.
|
|
Definitions could shadow local vars.
|
|
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
|
|
|
|
|
|
This was a ToDo item, for mesh-based rigid body shapes (trimesh, convex)
the operator was simply using the bounding box volume, which can grossly
overestimate the volume and mass.
Calculating the actual volume of a mesh is not so difficult after all,
see e.g.
http://research.microsoft.com/en-us/um/people/chazhang/publications/icip01_ChaZhang.pdf
This patch also allows calculating the center-of-mass in the same way.
This is currently unused, because the rigid body system assumes the CoM
to be the same as the geometric object center. This is fine most of the
time, adding such user settings for "center-of-mass offset" would also
add quite a bit of complexity in user space, but it could be necessary
at some point. A number of other physical properties could be calculated
using the same principle, e.g. the moment of inertia.
|
|
This check prevents using empty (no faces) meshes as rigid bodies.
While the idea makes sense, it also prevents using modifier-constructed
meshes, where faces are added only by the modifiers.
Further the check is very easy to circumvent, by removing faces after
making the rigid body, or by assigning a different mesh datablock
afterward.
Suggested by Fabian Emmes (@der_fab).
|
|
|
|
Make poll function for rigid body add operators less strict.
|
|
|
|
rename change/is_change/is_changed/modified -> changed
also use bools over int/short/char and once accidental float.
|
|
Fixes [#35403] Highlight not updating instantly when removing from Rigid body
|
|
CTX_data_active_object/ED_object_active_context.
- replace ED_operator_rigidbody_add_poll with ED_operator_object_active_editable_mesh
- replace ED_operator_rigidbody_active_poll with ED_operator_scene_editable for operators that use the entire selection.
- remove rigid-body from objects that are converted from meshes to curves, while this isnt crashing it is confusing to see in the UI.
|
|
identifiers.
|
|
- add checks so rigid-body operators only return FINISHED when they make some changes to the scene.
- remove (scene == NULL) checks, poll already catches these.
|
|
also change dump_rna2xml.py to dump bpy.data by default.
|
|
|
|
besides performance in some cases.
* DAG_scene_sort is now removed and replaced by DAG_relations_tag_update in
most cases. This will clear the dependency graph, and only rebuild it right
before it's needed again when the scene is re-evaluated.
This is done because DAG_scene_sort is slow when called many times from
python operators. Further the scene argument is not needed because most
operations can potentially affect more than the current scene.
* DAG_scene_relations_update will now rebuild the dependency graph if it's not
there yet, and DAG_scene_relations_rebuild will force a rebuild for the rare
cases that need it.
* Remove various places where ob->recalc was set manually. This should go
through DAG_id_tag_update() in nearly all cases instead since this is now
a fast operation. Also removed DAG_ids_flush_update that goes along with
such manual tagging of ob->recalc.
|
|
In some cases objects might have rigid bodies but aren't in the rigid
body group, just add objects to the group then.
Also allow changing the rigid body type by using the add acive/passive
buttons. This avoids having to remove objects just to change type.
|
