Age | Commit message (Collapse) | Author |
|
As discussed in https://developer.blender.org/D12034#412258, GLEW should be replaced by libepoxy to enable dynamic loading of OpenGL.
Build:
```sh
make lite debug ninja BUILD_CMAKE_ARGS="-DWITH_GHOST_X11=OFF -DWITH_GHOST_WAYLAND=ON -DWITH_GHOST_WAYLAND_LIBDECOR=ON -DPYTHON_VERSION=3.10" BUILD_DIR="../blender_build"
```
Verify that there are no X11 dependencies any more:
```sh
lddtree ./blender_build/bin/blender
```
and:
```sh
./blender_build/bin/blender
```
should then start a pure Wayland client.
This also works with GLX (`-DWITH_GHOST_X11=ON -DWITH_GHOST_WAYLAND=OFF`).
This has not been tested on other systems (Windows, macOS) as I do not have access to those systems and the build bot does not allow me to trigger experimental builds any more (I get "you need to have role 'any-control'").
Reviewed By: campbellbarton, brecht, jbakker
Differential Revision: https://developer.blender.org/D15291
|
|
It's helpful to make the separation of legacy data formats explicit,
because it declutters actively changed code and makes it clear which
areas do not follow Blender's current design. In this case I separated
the `MFace`/"tessface" conversion code into a separate blenkernel
.cc file and header. This also makes refactoring to remove these
functions simpler because they're easier to find.
In the future, conversions to the `MLoopUV` type and `MVert`
can be implemented here for the same reasons (see T95965).
Differential Revision: https://developer.blender.org/D15396
|
|
Removes the following macros for scene/render frame values:
- `CFRA`
- `SUBFRA`
- `SFRA`
- `EFRA`
These macros don't add much, other than saving a few characters when typing.
It's not immediately clear what they refer to, they just hide what they
actually access. Just be explicit and clear about that.
Plus these macros gave read and write access to the variables, so eyesores like
this would be done (eyesore because it looks like assigning to a constant):
```
CFRA = some_frame_nbr;
```
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D15311
|
|
Regression in [0] which caused canceled PRESS events not to generate
CLICK_DRAG.
Resolve by checking for an active brush tool in poll instead of the
PARTICLE_OT_brush_edit invoke function.
[0]: 4d0f846b936c9101ecb76a6db962aac2d74a460a,
|
|
Add new `BKE_id_is_editable` helper in `BKE_lib_id.h`, that supercedes
previous check (simple `ID_IS_LINKED()` macro) for many editing cases.
This allows to also take into account 'system override' (aka
non-editable override) case.
Ref: {T95707}.
|
|
|
|
Reserve "filename" when only the name component is used.
|
|
Currently this isn't used in the key-map, it will eventually
allow the 3D viewports tweak tool to match the behavior of other
editors that support tweaking a selection without first de-selecting
all other elements.
|
|
- Add SelectPick_Params struct to make picking logic more
straightforward and easier to extend.
- Use `eSelectOp` instead of booleans (extend, deselect, toggle)
which were used to represent 4 states (which wasn't obvious).
- Handle deselect_all when pocking instead of view3d_select_exec,
de-duplicate de-selection which was already needed in when replacing
the selection in picking functions.
- Handle outliner update & notifiers in the picking functions
instead of view3d_select_exec.
- Fix particle select deselect_all option which did nothing.
|
|
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3dbec we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
|
|
Lets `makesrna` generate a `RNA_prototypes.h` header with declarations for all
RNA properties. This can be included in regular source files when needing to
reference RNA properties statically.
This solves an issue on MSVC with adding such declarations in functions, like
we used to do. See 800fc1736748. Removes any such declarations and the related
FIXME comments.
Reviewed By: campbellbarton, LazyDodo, brecht
Differential Revision: https://developer.blender.org/D13837
|
|
Correct misspellings in code comments of "vertex" and "vertices".
See D13932 for more details.
Differential Revision: https://developer.blender.org/D13932
Reviewed by Harley Acheson
|
|
- Rename ED_view3d_win_to_delta `mval` argument to `xy_delta` as it
as it was misleading since this is an screen-space offset not a region
relative cursor position (typical use of the name `mval`).
Also rename the variable passed to this function which also used the
term `mval` in many places.
- Re-order the output argument of ED_view3d_win_to_delta last.
use an r_ prefix for return arguments.
- Document how the `zfac` argument is intended to be used.
- Split ED_view3d_calc_zfac into two functions as the `r_flip` argument
was only used in some special cases.
|
|
Using flags makes checking multiple modifiers at once more convenient
and avoids macros/functions such as IS_EVENT_MOD & WM_event_modifier_flag
which have been removed. It also simplifies checking if modifier keys
have changed.
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
Previously, macros were ifdefed using the cmake option `WITH_INTERNATIONAL`
However, the is unnecessary as withen the functions themselves have checks for building without internationalization.
This also means that many `add_definitions(-DWITH_INTERNATIONAL)` are also unnecessary.
Reviewed By: mont29, LazyDodo
Differential Revision: https://developer.blender.org/D13929
|
|
|
|
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
|
|
After disconnecting hair on an object, if you then hide the particle system, and try connecting the hair again, the operator is cancelled due to `remap_hair_emitter` returning `false` because `target_psmd->mesh_final` is NULL, but `connect_hair` will still strip the `PSYS_GLOBAL_HAIR` flag, which will cause the hair in the hidden particle system to be positioned incorrectly. The correct behavior is to strip the flag only if `remap_hair_emitter` succeeds.
Differential Revision: https://developer.blender.org/D13703
|
|
Fixes a bug introduced in rB5dedb39d447b. `mesh_original` is not set if the
mesh has no generative modifiers, in which case we can use `mesh_final`, which
would seem to be consistent with the rest of the particle code. An alternative
approach would be to make sure that `mesh_original` is always set in
`deformVerts`.
Differential Revision: https://developer.blender.org/D13754
|
|
|
|
Take the Use Modifier Stack setting into account when connecting hair, and
fix wrong results results when using deforming modifiers also.
Differential Revision: https://developer.blender.org/D13704
|
|
Ref T92709
|
|
|
|
When adding certain customdata layers (namely UVs, vertex colors and
sculpt vertex colors), the user does not get notified the specific limit
has been hit (blender just silently does nothing).
Now inform the user [decided to not do this in poll() since it could get
messy once operators are extended to operate on all selected objects, so
left this as a visible error in execute() -- or from python].
Maniphest Tasks: T92318
Differential Revision: https://developer.blender.org/D13147
|
|
Properties Editor
Similar to rBf9308a585ecd, use `psys_get_current` if we cant get the
active psys from context (which is only defined for the Properties
Editor). Other solution would be to define a "particle_system" context
member in other editors, but for now, stick with the simplest solution.
thx @mano-wii for additional input
Maniphest Tasks: T92402
Differential Revision: https://developer.blender.org/D13000
|
|
|
|
Before this patch attempting to remove a particle modifier programmatically
through Python would fail, because it deleted the modifier associated with
the currently active particle system instead of the one passed as an argument
to `bpy.types.ObjectModifiers.remove()`.
This fix adds an additional argument for the particle system to
`object_remove_particle_system`. This allows to specify which particle system
and its associated modifier shall be removed. In case of
`particle_system_remove_exec` it will remain the currently active particle
system, whereas `object_remove_particle_system` passes the particle system
of the modifier. Hence, the correct modifier will be removed.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D12234
|
|
Also hyphenate 'mouse-move' use doxy sections in render_update.c &
move function comment from the header to the source.
|
|
|
|
Followup to rB3834dc2f7b38 (where getting the proper particle system was
fixed for the Adjust Last Operation panel in the Properties Editor). But
since this operator can also be called from the 3DView, get a current
particle system there as well.
Without this, _all_ particle systems would be copied when executing from
the 3DView (which was never really intended [operator description uses
singular] -- it just happens to use `copy_particle_systems_to_object`
internally as well -- same as the `Copy Active/All to Selected Objects`
operators)).
ref. T83317
Maniphest Tasks: T83317
Differential Revision: https://developer.blender.org/D12033
|
|
Use C comments for plain text.
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
Also resolve a warning from the previous commit. The next blocker to
using const is `BKE_mesh_wrapper_ensure_mdata`.
|
|
|
|
|
|
|
|
|
|
It is more appropriate that `depths` is freed in `ED_view3d_depths_free`.
|
|
The depth cache (located in `RegionView3D::depths`) is used for quick
and simple occlusion testing in:
- particle selection,
- "Draw Curve" operator and
- "Interactive Light Track to Cursor" operator,
However, keeping a texture buffer in cache is not a recommended practice.
For displays with high resolution like 8k this represents something
around 132MB.
Also, currently, each call to `ED_view3d_depth_override` invalidates
the depth cache. So that depth is never reused in multiple calls from
an operator (this was not the case in blender 2.79).
This commit allows to create a depth cache and release it in the same
operator. Thus, the buffer is kept in cache for a short time, freeing
up space.
No functional changes.
|
|
When projecting into screen space Z value isn't always needed.
Add 2D projection functions, renaming them to avoid accidents
happening again.
- Add GPU_matrix_project_2fv
- Add ED_view3d_project_v2
- Rename ED_view3d_project to ED_view3d_project_v3
- Use the 2D versions of these functions when the Z value isn't used.
|
|
operator
This is only used when the preset is set to 'Custom', make that clear in
the tooltip and disable editing the value if another preset is used.
Issue came up in T88155.
Maniphest Tasks: T88155
Differential Revision: https://developer.blender.org/D11210
|
|
The check to include particle edit mode in the object-mode drop-down
didn't match the poll function to edit particle edit mode.
Share the check between both functions.
|
|
Now `ED_view3d_backbuf_depth_validate`, `ED_view3d_draw_depth` and
`ED_view3d_draw_depth_gpencil` are unified in `ED_view3d_depth_override`.
This new function replaces `ED_view3d_autodist_init`.
Also, since `ED_view3d_depth_update` depends on the render context, and
changing the context is a slow operation, that function also was removed,
and the depth buffer cached is now updated inside the new unified drawing
function when the "bool update_cache" parameter is true.
Finally `V3D_INVALID_BACKBUF` flag has been renamed and moved to
`runtime.flag`.
Differential revision: https://developer.blender.org/D10678
|
|
|
|
|
|
|
|
Undo/redo was crashing & asserting.
There ware two bugs:
- Entering particle system edit-mode requires an evaluated depsgraph.
- The active object could get out of sync when undo/redo
moves between different modes.
The new test 'view3d_mesh_particle_edit_mode_simple'
in `tests/ui_simulate/test_undo.py` exposes both issues.
|
|
Following the naming conventions defined in T56648, where in this
instance there were still a few remaining uses of the old term.
Differential Revision: https://developer.blender.org/D9817
|
|
|