| Age | Commit message (Collapse) | Author |
|---|
|
Doing this in preparation for some work on asset preview generation.
Differential Revision: https://developer.blender.org/D13676
|
|
Previously, `ImageTile->ok` and `ImageUser->ok` were used to indicate
whether an image failed to load. There were three possible values
which (probably) had the following meanings:
* `0`: There was an error while loading the image. Don't try to load again.
* `1`: Default value. Try to load the image.
* `2`: The image was loaded successfully.
This image-wide flag did not make sense unfortunately, because loading
may work for some frames of an image sequence but not for others.
Remember than an image data block can also contain a movie.
The purpose of the `->ok` flag was to serve as an optimization to avoid
trying to load a file over and over again when there is an error (e.g. the
file does not exist or is invalid). To get the optimization back, the patch
is changing `MovieCache` so that it can also cache failed load attempts.
As a consequence, `ibuf` is allowed to be `NULL` in a few more places.
I added the appropriate null checks.
This also solves issues when image sequences are used with the
Image Texture node in Geometry nodes (also see D12827).
Differential Revision: https://developer.blender.org/D12957
|
|
Use arrays for wmEvent coordinates, this quiets warnings with GCC11.
- `x, y` -> `xy`.
- `prevx, prevy` -> `prev_xy`.
- `prevclickx, prevclicky` -> `prev_click_xy`.
There is still some cleanup such as using `copy_v2_v2_int()`,
this can be done separately.
Reviewed By: campbellbarton, Severin
Ref D12901
|
|
Move overlay flags into SequencerPreviewOverlay and
SequencerTimelineOverlay structs.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12569
|
|
|
|
This addresses reduced visibility of scenes (as displayed in the VR
headset) that can result from the 8-bit color depth format currently
used for XR swapchain images.
By switching to a swapchain format with higher color depth (RGB10_A2,
RGBA16, RGBA16F) for supported runtimes, visibility in VR should be
noticeably improved.
However, current limitations are lack of support for these higher
color depth formats by some XR runtimes, especially for OpenGL.
Also important to note that GPU_offscreen_create() now explicitly
takes in the texture format (eGPUTextureFormat) instead of a
"high_bitdepth" boolean.
Reviewed By: Julian Eisel, Clément Foucault
Differential Revision: http://developer.blender.org/D9842
|
|
|
|
|
|
|
|
After looking into task isolation issues with Sergey, we couldn't find the
reason behind the deadlocks that we are getting in T87938 and a Sprite Fright
file involving motion blur renders.
There is no apparent place where we adding or waiting on tasks in a task group
from different isolation regions, which is what is known to cause problems. Yet
it still hangs. Either we do not understand some limitation of TBB isolation,
or there is a bug in TBB, but we could not figure it out.
Instead the idea is to use isolation only where we know we need it: when
holding a mutex lock and then doing some multithreaded operation within that
locked region. Three places where we do this now:
* Generated images
* Cached BVH tree building
* OpenVDB lazy grid loading
Compared to the more automatic approach previously used, there is the downside
that it is easy to miss places where we need isolation. Yet doing it more
automatically is also causing unexpected issue and bugs that we found no
solution for, so this seems better.
Patch implemented by Sergey and me.
Differential Revision: https://developer.blender.org/D11603
|
|
Under some circumstances using task isolation can cause deadlocks.
Previously, our task pool implementation would run all tasks in an
isolated region. Now using task isolation is optional and can be
turned on/off for individual task pools.
Task pools that spawn new tasks recursively should never enable
task isolation. There is a new check that finds these cases at runtime.
Right now this check is disabled, so that this commit is a pure refactor.
It will be enabled in an upcoming commit.
This fixes T88598.
Differential Revision: https://developer.blender.org/D11415
|
|
|
|
In 2.81 there was a change to increase the performance of viewport
animation rendering. This change would perform the color management on the
GPU if the only 8bit was needed. This saved CPU cycles and data
transfer.
The issue is that in the image editor or when saving the image the CM
will be reapplied. Although the speed is desired, exporting the actual
colors has more priority.
In the ticket there is an analysis that shows that shows that this fix
is the correct short term step to take. It would be better that the
render result is aware of the color space of its buffers so the applying
color management could be skipped when saving to disk or drawing in the
image editor.
The issue with this change is the performance penalty it has.
Reviewed By: Brecht van Lommel
Maniphest Tasks: T79999
Differential Revision: https://developer.blender.org/D10371
|
|
|
|
Caused by rB5b34d11b55e0.
Above commit restored the view matrices in ED_view3d_draw_offscreen
_before_ they can be stored in the ImBuff (see ED_view3d_draw_offscreen
/ texture_paint_image_from_view_exec).
Now make restoring the view matrices optional and dont do this in case
of reprojection, so the used matrices can still be saved in the ImBuff
later.
Reviewed By: campbellbarton
Maniphest Tasks: T85395
Differential Revision: https://developer.blender.org/D10331
|
|
Approximately 91 spelling corrections, almost all in comments.
Differential Revision: https://developer.blender.org/D10288
Reviewed by Harley Acheson
|
|
|
|
|
|
Conflicts:
source/blender/editors/render/render_opengl.c
source/blender/sequencer/intern/effects.c
|
|
This is was caused by incorrectly set preview_render_size in VSE
rendering context. Value was set to SEQ_PROXY_RENDER_SIZE_FULL, but
it should be SEQ_PROXY_RENDER_SIZE_SCENE as scene render size is
being used.
This is same fix as 0d7036b40e68, but I did not checked openGL
render pipeline.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9562
|
|
Replace BKE_sequencer wirh SEQ_render or SEQ_proxy prefixes.
In cases where function is very generic, only SEQ prefix is used.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9439
|
|
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9349
|
|
- BKE_bezt_subdivide_handles -> BKE_fcurve_bezt_subdivide_handles
- binarysearch_bezt_index -> BKE_fcurve_bezt_binarysearch_index
These functions are specific to F-Curves and don't make sense for other
uses of BezTriple (curve-object data for e.g.)
Also:
- Move detailed doxygen comment above code, following code-style.
- Mark bezt_add_to_cfra_elem unused.
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
render animation'
During viewport render animation the gpu textures weren't tagged as
invalid. As the image uv editor now draws the gpu texture only the first
was shown as it wasn't refreshed with the actual image data.
|
|
This replace `GPU_clear()` by `GPU_clear_color()` and `GPU_clear_depth()`.
Since we always set the clear value before clearing, it is unecessary
to track the clear color state.
Moreover, it makes it clearer what we clear the framebuffer to.
|
|
Reviewers: sergey
Differential Revision: https://developer.blender.org/D8613
|
|
Also order sizeof(..) first to promote other values to size_t.
|
|
The abbreviation 'init' is brief, unambiguous and already used
in thousands of places, also initialize is often accidentally
written with British spelling.
|
|
Remove use of GL* constants and types inside the codebase. There is still
a few occurence to get rid of.
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors` module.
No functional changes.
|
|
This is because the DRW module is no longer compatible with drawing using
MSAA.
This also change the Python API.
|
|
|
|
|
|
This patch enables TBB as the default task scheduler. TBB stands for Threading Building Blocks and is developed by Intel. The library contains several threading patters. This patch maps blenders BLI_task_* function to their counterpart. After this patch we can add more patterns. A promising one is TBB:graph that can be used for depsgraph, draw manager and compositor.
Performance changes depends on the actual hardware. It was tested on different hardwares from laptops to workstations and we didn't detected any downgrade of the performance.
* Linux Xeon E5-2699 v4 got FPS boost from 12 to 17 using Spring's 04_010_A.anim.blend.
* AMD Ryzen Threadripper 2990WX 32-Core Animation playback goes from 9.5-10.5 FPS to 13.0-14.0 FPS on Agent 327 , 10_03_B.anim.blend.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D7475
|
|
In preparation for {D7475}
|
|
This data block will be the container for simulation node trees.
It will be used for the new particle node system (T73324).
The new data block has the type `ID_SIM`.
It is not visible to users and other developers by default yet.
To enable it, activate the cmake option `WITH_NEW_SIMULATION_TYPE`.
New simulation data blocks can be created by running `bpy.data.simulations.new("name")`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7225
|
|
Tasks: move priority from task to task pool {rBf7c18df4f599fe39ffc914e645e504fcdbee8636}
Tasks: split task.c into task_pool.cc and task_iterator.c {rB4ada1d267749931ca934a74b14a82479bcaa92e0}
Differential Revision: https://developer.blender.org/D7385
|
|
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
|
|
|
|
|
|
Both the MS headers and blender headers define the HKEY
which gives all kind of inclusion order issues.
This diff renames all *KEY constants to EVT_*KEY to resolve
this conflict.
Reviewed By: brecht , dfelinto
Differential Revision: http://developer.blender.org/D7164
|
|
Only the volume object is exposed in the user interface. It is based on OpenVDB
internally. Drawing and rendering code will follow in another commit.
https://wiki.blender.org/wiki/Source/Objects/Volume
https://wiki.blender.org/wiki/Reference/Release_Notes/2.83/Volumes
Hair and PointCloud object types are hidden behind a WITH_NEW_OBJECT_TYPES
build option. These are unfinished, and included only to make it easier to
cooperate on development in the future and avoid tricky merges.
https://wiki.blender.org/wiki/Source/Objects/New_Object_Types
Ref T73201, T68981
Differential Revision: https://developer.blender.org/D6945
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
Motivation the functions get 3 different kind of flag parameters (ImBuf,
DrawType, OffscreenRendering) the naming of the flags were not clear,
leading to mistakes and unnecessary time spend debugging.
|
|
|
|
|
|
Using a struct here allows to change given parameters to the callbacks
without having to edit all callbacks functions, which is always noisy
and time consuming.
|
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
The Viewport Render Keyframes operator didn't include keyframes from
grease pencil animation or from mesh shape key animation (see T72861).
To find all related datablocks that could be considered as part of the
selected object, `BKE_library_foreach_ID_link(..., IDWALK_RECURSE)` is
used. To prevent relations like constraint targets from being visited,
the recursion is stopped when it finds a different object.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6558
|
