| Age | Commit message (Collapse) | Author |
|---|
|
In 2.81 there was a change to increase the performance of viewport
animation rendering. This change would perform the color management on the
GPU if the only 8bit was needed. This saved CPU cycles and data
transfer.
The issue is that in the image editor or when saving the image the CM
will be reapplied. Although the speed is desired, exporting the actual
colors has more priority.
In the ticket there is an analysis that shows that shows that this fix
is the correct short term step to take. It would be better that the
render result is aware of the color space of its buffers so the applying
color management could be skipped when saving to disk or drawing in the
image editor.
The issue with this change is the performance penalty it has.
Reviewed By: Brecht van Lommel
Maniphest Tasks: T79999
Differential Revision: https://developer.blender.org/D10371
|
|
|
|
Caused by rB5b34d11b55e0.
Above commit restored the view matrices in ED_view3d_draw_offscreen
_before_ they can be stored in the ImBuff (see ED_view3d_draw_offscreen
/ texture_paint_image_from_view_exec).
Now make restoring the view matrices optional and dont do this in case
of reprojection, so the used matrices can still be saved in the ImBuff
later.
Reviewed By: campbellbarton
Maniphest Tasks: T85395
Differential Revision: https://developer.blender.org/D10331
|
|
Remove redundant headers using
`./source/tools/utils_maintenance/code_clean.py`
Reviewed By: jmonteath
Ref D10364
|
|
Approximately 91 spelling corrections, almost all in comments.
Differential Revision: https://developer.blender.org/D10288
Reviewed by Harley Acheson
|
|
|
|
|
|
Previously this relied on the dependency graph to detect changes in the screen
datablock, which would then notify the renderers. This was rather indirect an
not even really by design. Instead use notifiers to tag specific 3D viewports
to be updated.
Includes changes to BKE_scene_get_depsgraph to accept a const Scene pointer.
Testing if this works correctly requires adding back commits 81d444c and 088904d,
since those have been temporarily reverted.
Differential Revision: https://developer.blender.org/D10235
|
|
Preview icons (e.g. material preview or other data-block previews) use the same
background-job code as deferred loading of custom icons/previews. There was a
check to skip preview generation if the render engine does not support preview
rendering mode, which workbench doesn't. However this check should only be used
when actually rendering a preview, not when doing deferred loading.
|
|
Partially reverts 2250b5cefee7.
Removing the user count and fake user count icons was controversial (which was
expected) and there are a few further changes needed, that won't make it in
time for the release, see D9946.
While there is a design to bring back the user count and fake user indicators,
a new design idea was proposed that the UI team wants to follow. This came too
late for the 2.92 release, the new design is targeted at the 2.93 release now.
Meanwhile, UI team decision was to simply revert the design changes.
The new design is being worked on in https://developer.blender.org/T84669.
Note that this commit does not revert some internal changes done in
2250b5cefee7. Namely the introduction of `ed_util_ops.c` and data-block
operators in there. These will still be needed in the new design.
|
|
linked obdata) fail
Caused by rB1a650fdcb286.
Above commit made polling more restricitive in that it did not allow for
actions on material slots (linked to object, not object data) on objects
with liked object data. This should be allowed though.
Maniphest Tasks: T84593
https://developer.blender.org/D10078
|
|
|
|
|
|
Group with other icon preview API functions.
|
|
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
|
|
|
|
API functions get SEQ_ prefix.
Intern functions get seq_ prefix
Functions also have appropriate category included in name.
|
|
The previous design is rather old and has a couple of problems:
* Scalability: The current solution of adding little icon buttons next to the
data-block name field doesn't scale well. It only works if there's a small
number of operations. We need to be able to place more items there for better
data-block management. Especially with the introduction of library overrides.
* Discoverability: It's not obvious what some of the icons do. They appear and
disappear, but it's not obvious why some are available at times and others
not.
* Unclear Status: Currently their library status (linked, indirectly linked,
broken link, library override) isn't really clear.
* Unusual behavior: Some of the icon buttons allow Shift or Ctrl clicking to
invoke alternative behaviors. This is not a usual pattern in Blender.
This patch does the following changes:
* Adds a menu to the right of the name button to access all kinds of operations
(create, delete, unlink, user management, library overrides, etc).
* Make good use of the "disabled hint" for tooltips, to explain why buttons are
disabled. The UI team wants to establish this as a good practise.
* Use superimposed icons for duplicate and unlink, rather than extra buttons
(uses less space, looks less distracting and is a nice + consistent design
language).
* Remove fake user and user count button, they are available from the menu now.
* Support tooltips for superimposed icons (committed mouse hover feedback to
master already).
* Slightly increase size of the name button - it was already a bit small
before, and the move from real buttons to superimposed icons reduces usable
space for the name itself.
* More clearly differentiate between duplicate and creating a new data-block.
The latter is only available in the menu.
* Display library status icon on the left (linked, missing library, overridden,
asset)
* Disables "Make Single User" button - in review we weren't sure if there are
good use-cases for it, so better to see if we can remove it.
Note that I do expect some aspects of this design to change still. I think some
changes are problematic, but others disagreed. I will open a feedback thread on
devtalk to see what others think.
Differential Revision: https://developer.blender.org/D8554
Reviewed by: Bastien Montagne
Design discussed and agreed on with the UI team, also see T79959.
|
|
This patch introduces a partial update of GPUTexture. When rendering
a large image the GPUTexture could have been scaled. The old implementation
would rescale the image on CPU and create a new GPUTexture. This
resulted in flooding the PCI bus.
The new solution would only scale and upload the parts of the GPUTexture
that has been changed. It does this by keeping track of areas of 256x256
pixels. When something changes the tiles that cover that changes will be
rescaled and uploaded the next time the GPUTexture is requested.
Test situation: Default Cube, 4 samples, 19200x10800 tile size 512.
Blender 2.83.9: 4m27s.
Blender 2.91: 20+m (regression)
This patch: 1m01s.
There is still room for more optimizations:
* Reduce the time that an image is locked.
** Use task scheduling to update the tiles of an image.
** Generic optimization of the ImBuf scale method.
Maniphest Tasks: T82591
Differential Revision: https://developer.blender.org/D9591
|
|
The `crop` field was used by Blender Internal to do an overscan per
tile and merge it back to the render result.
|
|
* Support defining (not necessarily rendering) icons in threads. Needed so the
File Browser can expose file previews with an icon-id to scripts.
** For that, ported `icons.c` to C++, to be able to use scope based mutex locks
(cleaner & safer code). Had to do some cleanups and minor refactoring for
that.
* Added support for ImBuf icons, as a decent way for icons to hold the file
preview buffers.
* Tag previews as "unfinished" while they render in a thread, for the File
Browser to dynamically load previews as they get finished.
* Better handle cases where threaded preview generation is requested, but the
ID type doesn't support it (fallback to single threaded). This is for general
sanity of the code (as in, safety and cleanness)
* Enabled asset notifier for custom preview loading operator, was just disabled
because `NC_ASSET` wasn't defined in master yet.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9719
Reviewed by: Bastien Montagne, Brecht Van Lommel
|
|
Apparently the ID pointer can be NULL, which most code here assumes is
not the case. But it's very fragile & finicky, there is one code path
were it's allowed to be NULL.
Add necessary NULL-checks, an assert as sanity check and a comment to
note the possibility of NULL.
|
|
Object previews are really helpful for visual data-block selection, like asset
browsing. Having them be generative should also be quite handy and should work
well enough in many, if not most cases.
What this does is simple:
* Place the object (actually a deep copy of it, for thread safety) in a virtual
.blend into an empty scene/view-layer.
* Add a camera, point it towards the front of the object, assuming that means
pointing towards its +Y axis.
* Use "Camera Fit Frame to Selected" logic to put the object into frame.
* Create a threaded off-screen render.
Of course, such an automatic preview will not work in all situations. E.g. it
currently does a bad job capturing a single plane. We could add options for
more advanced automatic previews, but probably custom previews is more
important, which I committed already (812ea9184221).
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Reviewed as part of https://developer.blender.org/D9719.
Reviewed by: Bastien Montagne, Brecht Van Lommel
|
|
No automatic preview generation will ever be good enough to cover all cases
well. So custom preview images are a must for a preview driven data-block
selection - like for asset browsing.
The operator simply allows selecting an image file, which will then be read and
copied into the data-blocks preview (resized if necessary).
There's no UI for this currently and the operator won't be available in the
search menu yet. It will later once the Asset Browser UI is merged.
Reviewed as part of https://developer.blender.org/D9719.
Reviewed by: Bastien Montagne, Brecht Van Lommel
|
|
This patch adds support for AOVs in EEVEE. AOV Outputs can be defined in the
render pass tab and used in shader materials. Both Object and World based
shaders are supported. The AOV can be previewed in the viewport using the
renderpass selector in the shading popover.
AOV names that conflict with other AOVs are automatically corrected. AOV
conflicts with render passes get a warning icon. The reason behind this is that
changing render engines/passes can change the conflict, but you might not notice
it. Changing this automatically would also make the materials incorrect, so best
to leave this to the user.
**Implementation**
The patch adds a copies the AOV structures of Cycles into Blender. The goal is
that the Cycles will use Blenders AOV defintions. In the Blender kernel
(`layer.c`) the logic of these structures are implemented.
The GLSL shader of any GPUMaterial can hold multiple outputs (the main output
and the AOV outputs) based on the renderPassUBO the right output is selected.
This selection uses an hash that encodes the AOV structure. The full AOV needed
to be encoded when actually drawing the material pass as the AOV type changes
the behavior of the AOV. This isn't known yet when the GLSL is compiled.
**Future Developments**
* The AOV definitions in the render layer panel isn't shared with Cycles.
Cycles should be migrated to use the same viewlayer aovs. During a previous
attempt this failed as the AOV validation in cycles and in Blender have
implementation differences what made it crash when an aov name was invalid.
This could be fixed by extending the external render engine API.
* Add support to Cycles to render AOVs in the 3d viewport.
* Use a drop down list for selecting AOVs in the AOV Output node.
* Give user feedback when multiple AOV output nodes with the same AOV name
exists in the same shader.
* Fix viewing single channel images in the image editor [T83314]
* Reduce viewport render time by only render needed draw passes. [T83316]
Reviewed By: Brecht van Lommel, Clément Foucault
Differential Revision: https://developer.blender.org/D7010
|
|
|
|
Conflicts:
source/blender/editors/render/render_opengl.c
source/blender/sequencer/intern/effects.c
|
|
This is was caused by incorrectly set preview_render_size in VSE
rendering context. Value was set to SEQ_PROXY_RENDER_SIZE_FULL, but
it should be SEQ_PROXY_RENDER_SIZE_SCENE as scene render size is
being used.
This is same fix as 0d7036b40e68, but I did not checked openGL
render pipeline.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9562
|
|
|
|
Move headers files from `render/extern/` to `render/`
Part of T73586
|
|
Replace BKE_sequencer wirh SEQ_render or SEQ_proxy prefixes.
In cases where function is very generic, only SEQ prefix is used.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9439
|
|
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9349
|
|
|
|
Corrects incorrect usages of the word 'loose' when 'lose' was required.
Differential Revision: https://developer.blender.org/D9243
Reviewed by Campbell Barton
|
|
- BKE_bezt_subdivide_handles -> BKE_fcurve_bezt_subdivide_handles
- binarysearch_bezt_index -> BKE_fcurve_bezt_binarysearch_index
These functions are specific to F-Curves and don't make sense for other
uses of BezTriple (curve-object data for e.g.)
Also:
- Move detailed doxygen comment above code, following code-style.
- Mark bezt_add_to_cfra_elem unused.
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
Those were only shallow wrappers around `BKE_id_copy`, barely used (even
fully unused in some cases), and we want to get rid of those ID-specific
helpers for the common ID management tasks. Also prevents weird custom
behaviors (like `BKE_object_copy`, who was the only basic ID copy
function to reset user count of the new copy to zero).
Part of 71219.
|
|
Note that possibility to pass the new ID pointer as parameter was kept,
as this is needed for some rather specific cases (like in depsgraph/COW,
when copying into already allocated memory).
Part of T71219.
|
|
code.
Besides the NodeTree case (which remains unchanged), the localize code
is only used in one place (to generate previews of shading data-blocks).
This commit introduces a new `LIB_ID_CREATE_LOCAL` option for ID
creation/copying, which essentially implements the behavior of the
removed `BKE_XXX_localize()` functions into regular mainstream ID copy
code. When this option is set:
- new ID is tagged with `LIB_TAG_LOCALIZED`;
- Some ID copying callbacks have specific behaviors, mainly the root
nodetree of shading IDs gets duplicated with specialized
`ntreeLocalize()` function.
Note that I would not consider getting rid of `ntreeLocalize` for now,
this function is recursive, which should ideally never happen within ID
management copying code (this introduces all kind of complications).
No behavioral change expected from this commit.
|
|
This is first step of refactoring task T77580.
Next step will be breaking up files into smaller ones.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D8492
|
|
This was already changed for Material nodetrees on duplication in
rBa75ac18638f4.
Since it is not obvious from the UI how change World actions - and to be
consistent with Material actions, it is best to copy the action as the
default behavior.
So use generic BKE_id_copy functions with LIB_ID_COPY_ACTIONS flag [which
also enables us to get rid of `BKE_world_copy`]
Note: taking the User Preference `USER_DUP_ACT` into account here (for
both material and world actions) could be a followup step.
Maniphest Tasks: T81248
Differential Revision: https://developer.blender.org/D9046
|
|
Cleanup old tracker task format to the new. e.g: [#34039] to T34039
Ref D8718
|
|
`ED_preview_icon_render()` owns the `id_copy` localized ID, so it has to
free it itself.
|
|
render animation'
During viewport render animation the gpu textures weren't tagged as
invalid. As the image uv editor now draws the gpu texture only the first
was shown as it wasn't refreshed with the actual image data.
|
|
Those two functions had `BKE_` prefix, were defined in BKE headers, but
implemented in ED code, yuck.
Moved everything to ED area for now, since those do not look fondamental
enough to belong to BKE, and none of their usages requires it currently.
|
|
|
|
This project moves the current UV/Image editor drawing to the draw manager.
Why would we do this:
**Performance**:
Current implementation would draw each texel per time. Multiple texels could be
drawn per pixel what would overwrite the previous result. You can notice this
when working with large textures. Repeat image drawing made this visible by
drawing for a small period of time and stop drawing the rest. Now the rendering
is fast and all repeated images are drawn.
**Alpha drawing**:
Current implementation would draw directly in display space. Giving incorrect
results when displaying alpha transparent images.
This addresses {T52680}, {T74709}, {T79518}
The image editor now can show emission only colors. See {D8234} for
examples.
**Current Limitations**
Using images that are larger than supported by your GPU are resized (eg larger
than 16000x16000 are resized to 8k). This leaves some blurring artifacts. It is
a low priority to add support back of displaying individual pixels of huge
images. There is a design task {T80113} with more detail.
**Implementation overview**
Introduced an Image Engine in the draw module. this engine is responsible for
drawing the texture in the main area of the UV/Image editor. The overlay engine
has a edit_uv overlay which is responsible to draw the UV's, shadows and
overlays specifically for the UV Image editor. The background + checker pattern
is drawn by the overlay_background.
The patch will allow us to share overlays between the 3d viewport and UV/Image
editor more easily. In most cases we just need to switch the `pos` with the `u`
attribute in the vertex shader.
The project can be activated in the user preferences as experimental features.
In a later commit this will be reversed.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8234
|
|
Use this utility function for render-shading & weight paint modes.
This adds support for edit-mode & pose-mode where all objects in the
mode are used in this case instead of the selected objects.
|
|
This is useful to run in object-mode, instead of from the property editor,
note that this still only used the current object when activated from
the property editor.
|
|
|
