Age | Commit message (Collapse) | Author |
|
Existing code didn't account for top/bottom overlap.
|
|
The outliner can redraw quicker without rebuilding the tree, for example when
just moving the mouse and highlighting different items. The way this worked is
that the outliner would be tagged to avoid rebuilding, however if another
operation that does require rebuilding happens in the meantime we could go out
of sync and crash.
|
|
Linking/appending in edit mode currently isn't supported. For workspaces it
should probably be, but we can look into supporting this later.
For now gray out buttons in "Add Workspace" menu while in edit mode.
|
|
|
|
Loading a file that was written with the master branch into the 2.8 branch,
and then trying to load or save, caused a segfault.
|
|
Steps to recreate were:
* Go into fullscreen mode (Alt+F10)
* Open debug menu (Ctrl+Alt+D)
* Set value to 1
* Confirming should crash (at least in debug builds)
|
|
Was hidden behind debug values 1, 2 and 3.
Also cleaned up logic in region_azone_edge_initialize. It was using a variable
called is_hidden that actually should've been called is_visible.
|
|
Scroll-bars are now hidden unless the cursor approaches them, in which case they
smoothly grow and become more & more visible. Note that since 0d309144020168e55,
scroll-bars are drawn on top of editor contents. There's no more jumping of
buttons when scroll-bars appear.
Technical notes:
* AZones are used to adjust scrollbars based on mouse movements
We may want to support screen level AZones if we want scrollbars to also
smoothly appear when approaching them from a different area.
I also plan to make further changes to AZones to clean up stuff a bit.
* Had to move AZone handling to a post ARegion init stage, since we need the
updated View2D data from there.
* View2D masks and scroller rectangles are now updated on every redraw. It's
cheap to do that though.
|
|
Scroll-bars used to draw in a little extra space in the editor, causing
buttons to jump a bit when they appeared/disappeared. Now they draw on
top of the buttons, just small enough to avoid bigger overlaps. Followup commits
will do further adjustments.
With this we can get rid of a hack that was calling the (often Python
defined) panel definition - the panel 'draw' callback - twice.
|
|
|
|
|
|
This was still used in a few places but not kept in sync with the actual
header position. Always get alignment from the header region now.
|
|
|
|
This is for the 3D viewport and image editor. A remaining issue is
that pulldown menu buttons only show text, which is not visible on
all background colors, so making the header entirely transparent
does not work well at the moment.
|
|
The asserts were introduced on rB5f6c45498c92 (top-bar).
Although the asserts are technically correct, they would fail even in master.
And the commit simply added the asserts without fixing the situation itself
(as you can see in the report, it is really simple to reproduce this issue).
I propose we remove the asserts and bring them back only when the situation
itself is fixed. It doesn't make sense to introduce asserts that would fail
with the current state of the code.
|
|
Dynamically sized regions in the topbar were flickering due to only updating
their size after redraws. Now there is an optional layout() callback for
all regions in an area to do UI layout first, then refresh the region layout,
and then do the actual drawing for each region.
Task T54753
|
|
|
|
|
|
Note: Quad-View region overlay drawing is not working because of e01cadd657c7.
However I tested this patch after reverting that commit locally and this
patch's code seems fine.
Partial revert of 3d62230ed673.
|
|
For Blender 2.8 we had to be compatible with very old OpenGL versions, and
triple buffer was designed to work without offscreen rendering, by copying
the the backbuffer to a texture right before swapping. This way we could
avoid redrawing unchanged regions by copying them from this texture on the
next redraws. Triple buffer used to suffer from poor performance and driver
bugs on specific cards, so alternative draw methods remained available.
Now that we require newer OpenGL, we can have just a single draw method
that draw each region into an offscreen buffer, and then draws those to
the screen. This has some advantages:
* Poor 3D view performance when using Region Overlap should be solved now,
since we can also cache overlapping regions in offscreen buffers.
* Page flip, anaglyph and interlace stereo drawing can be a little faster
by avoiding a copy to an intermediate texture.
* The new 3D view drawing already writes to an offscreen buffer, which we
can draw from directly instead of duplicating it to another buffer.
* Eventually we will be able to remove depth and stencil buffers from the
window and save memory, though at the moment there are still some tools
using it so it's not possible yet.
* This also fixes a bug with Eevee sampling not progressing with stereo
drawing in the 3D viewport.
Differential Revision: https://developer.blender.org/D3061
|
|
Once a region is set to it's snapped size, zooming keeps the size.
|
|
Fullscreen as in the Alt+F10 fullscreen.
|
|
There is no need for it now that we use opengl 3.3. Use GL_RGBA16F instead.
|
|
Would cause weird & broken areas below the topbar.
|
|
|
|
|
|
The only real reason we need `butspacetype` is while switching areas, where we
need to delay the actual switch to the RNA _update callback since only there we
can access context.
So instead of trying to sync it with `spacetype`, only set while needed and
unset it afterwards (as in set to `SPACE_EMPTY`).
This should also allow us to re-use `butspacetype` in versioning code when
trying to read removed editors. It'll store the space type value of the removed
editor which we can then use on versioning.
For backwards compatibility, we store `butspacetype` with the value of
`spacetype`.
|
|
Note: Not bothering with doversion, re-using 280, 10 bump.
|
|
We bring back embossing however only for areas.
We use the same color for the corners.
|
|
We are using a different visual system to tell the areas apart.
There is no longer need for embossing.
|
|
Now that we can easily tell the corners apart, there is no need to
a specific action zone draw here (cursor still changes, naturally).
|
|
|
|
This makes easier to distinguish between different editors
(as oppose to an editor and its regions).
Note action zones look a bit strange with this. I recommend we do next:
* Make sure all 4 corners can be used as action zones.
* Remove their drawing code (or show them only on mouse hover).
|
|
Using extern makes too easy to get a crash if the original
function definition changed.
|
|
Opening as in activating one in an area that didn't contain a properties editor
before.
|
|
|
|
Requiring context means we can't easily create new editors to replace deprecated
ones in versioning code.
Think it's reasonable to give editors access to scene and area data for their
initial setup though. They mostly need it for setting "the view", as in,
scrolling values.
Also did minor cleanup in top-bar creation function.
|
|
That way the tabs look nicely together with the lower sub-bar.
|
|
|
|
* Make bottom half of topbar a bit higher
* Make tabs higher and put them closer together
* Remove screen layouts dropdown, we'll have one layout per window
* Hide action zones from topbar
* Don't change topbar background color when activating
|
|
This commit removes all references to the old timeline editor.
Unfortuantely, the removal of the Timeline spacetype defining
functions has ended up breaking the version patching code I'd
been working on earlier (as now, the editor gets marked as
"unknown/info" before we get a chance to patch it!)
|
|
changing visibility of regions
Previously, there was only an API method to toggle and update, but sometimes you
want to explicitly hide instead of just toggling.
|
|
== Main Features/Changes for Users
* Add horizontal bar at top of all non-temp windows, consisting out of two horizontal sub-bars.
* Upper sub-bar contains global menus (File, Render, etc.), tabs for workspaces and scene selector.
* Lower sub-bar contains object mode selector, screen-layout and render-layer selector. Later operator and/or tool settings will be placed here.
* Individual sections of the topbar are individually scrollable.
* Workspace tabs can be double- or ctrl-clicked for renaming and contain 'x' icon for deleting.
* Top-bar should scale nicely with DPI.
* The lower half of the top-bar can be hided by dragging the lower top-bar edge up. Better hiding options are planned (e.g. hide in fullscreen modes).
* Info editors at the top of the window and using the full window width with be replaced by the top-bar.
* In fullscreen modes, no more info editor is added on top, the top-bar replaces it.
== Technical Features/Changes
* Adds initial support for global areas
A global area is part of the window, not part of the regular screen-layout.
I've added a macro iterator to iterate over both, global and screen-layout level areas. When iterating over areas, from now on developers should always consider if they have to include global areas.
* Adds a TOPBAR editor type
The editor type is hidden in the UI editor type menu.
* Adds a variation of the ID template to display IDs as tab buttons (template_ID_tabs in BPY)
* Does various changes to RNA button creation code to improve their appearance in the horizontal top-bar.
* Adds support for dynamically sized regions. That is, regions that scale automatically to the layout bounds.
The code for this is currently a big hack (it's based on drawing the UI multiple times). This should definitely be improved.
* Adds a template for displaying operator properties optimized for the top-bar. This will probably change a lot still and is in fact disabled in code.
Since the final top-bar design depends a lot on other 2.8 designs (mainly tool-system and workspaces), we decided to not show the operator or tool settings in the top-bar for now. That means most of the lower sub-bar is empty for the time being.
NOTE: Top-bar or global area data is not written to files or SDNA. They are simply added to the window when opening Blender or reading a file. This allows us doing changes to the top-bar without having to care for compatibility.
== ToDo's
It's a bit hard to predict all the ToDo's here are the known main ones:
* Add options for the new active-tool system and for operator redo to the topbar.
* Automatically hide the top-bar in fullscreen modes.
* General visual polish.
* Top-bar drag & drop support (WIP in temp-tab_drag_drop).
* Improve dynamic regions (should also fix some layout glitches).
* Make internal terminology consistent.
* Enable topbar file writing once design is more advanced.
* Address TODO's and XXX's in code :)
Thanks @brecht for the review! And @sergey for the complaining ;)
Differential Revision: D2758
|
|
|
|
ViewRender was removed, which means we can't get the render engine for files
saved in 2.8. We assume that any files saved in 2.8 were intended to use Eevee
and set the engine to that.
A fix included with this is that .blend thumbails now draw with Clay mode,
and never Eevee or Cycles. These were drawn with solid mode in 2.7, and should
be very fast and not e.g. load heavy image textures.
Differential Revision: https://developer.blender.org/D3156
|
|
This was stored in the workspace, selected from the view.
Move both to scene since custom orientations are closely related to your
scene data.
|
|
Folders removed entirely:
* //extern/recastnavigation
* //intern/decklink
* //intern/moto
* //source/blender/editors/space_logic
* //source/blenderplayer
* //source/gameengine
This includes DNA data and any reference to the BGE code in Blender itself.
We are bumping the subversion.
Pending tasks:
* Tile/clamp code in image editor draw code.
* Viewport drawing code (so much of this will go away because of BI removal
that we can wait until then to remove this.
|
|
Indent lines for multi object editing, no functional changes.
Also strip trailing space from indented regions.
|
|
This adds initial multi-object editing support.
- Selected objects are used when entering edit & pose modes.
- Selection & tools work on all objects however many tools need porting
See: T54641 for remaining tasks.
Indentation will be done separately.
See patch: D3101
|
|
|