| Age | Commit message (Collapse) | Author |
|---|
|
This makes it possible to trigger a refresh of the data-block preview,
available next to the preview in the Asset Browser sidebar. The previews get
easily outdated and automatically refreshing it all the time is not an option
because it would be a consistently running, quite expensive process. So a
button to cause a refresh should be reasonable.
This button can also be used to switch back from a custom preview to a
generated one. Although that may not be clear, and we should probably think of
a way to explain that better.
Addresses T82719.
|
|
If Preferences > Interface > Temporary Editors > File Browser is set to
"Maximized Area", opening a File Browser from a File or Asset Browser as
regular editor would cause some issues. For example after closing the
temporary File Browser, the regular browser would take over the file
path and display settings from the temporary one. This is because they
used to share the same area data.
Some similar issues may have happend with temporary image editors.
Now, this commit finally separates the space data of temporary maximized
editors from the regular ones. So the editor data is entirely
independent now, as it should be.
|
|
If Preferences > Interface > Temporary Editors > File Browser is set to
"Maximized Area", opening a File Browser from an Asset Browser would
cause the new maximized editor to be an Asset Browser. Exiting it again
would crash.
This fixes the wrong behavior and the crash. There's still an issue with
exiting the editor again, it stays a File Browser then and doesn't go
back to being an Asset Browser. That's to be fixed separately.
|
|
|
|
The strips were given the wrong owner ID. This only caused issues for
python based UI as far as I know. Property changes would not properly
update the viewport.
Reviewed By: lichtwerk
Differential Revision: https://developer.blender.org/D9685
|
|
No automatic preview generation will ever be good enough to cover all cases
well. So custom preview images are a must for a preview driven data-block
selection - like for asset browsing.
The operator simply allows selecting an image file, which will then be read and
copied into the data-blocks preview (resized if necessary).
There's no UI for this currently and the operator won't be available in the
search menu yet. It will later once the Asset Browser UI is merged.
Reviewed as part of https://developer.blender.org/D9719.
Reviewed by: Bastien Montagne, Brecht Van Lommel
|
|
Use 'and' instead of ampersand in descriptions and comments.
Differential Revision: https://developer.blender.org/D9797
Reviewed by Aaron Carlisle
|
|
Fix a crash when right-clicking in the Graph Editor animation channel
list. The code for getting selected keyframes was not checking for baked
curves.
|
|
As proposed in T74432 and already implemented in several commits,
"region" is the preferred name for `ARegion` variables, rather than
any variant of "ar". This commit changes a few "ar" variables that have
popped up over time and also adjusted names of variants like "arnew".
|
|
|
|
After recent changes to the context panel layout (rB187cc5e26d28b1a8),
there has been an error printed when running propery search:
> Error: separator_spacer() not supported in popups.
The layout code thinks it's drawing in a menu because region->visible
isn't properly set for the other tab searches. This patch sets that field
for the temporary searching region, but it also disables searching in the
context breadcrumbs panel, because at best this will just give results
for the names of the active object, etc. This isn't helpful since
those labels are mostly in every tab anyway.
Differential Revision: https://developer.blender.org/D9425
|
|
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
|
|
The overlap with the `Panel` flags that start with "PNL" was quite
confusing because wasn't clear which enum a flag was from. The
new names are a bit longer, but the clarity is worth it.
|
|
|
|
|
|
`WM_operator_properties_filesel()` allows C operators to set a display or sort
type for the File Browser to use. But the File Browser would always override
that because of an invalid `_is_set()` check. (The operators don't actually set
the value, they only set the property's default value.)
The only operator affected by this is "Recover Auto Save". It is supposed to
show a vertical list ordered chronologically. It used settings from the
previous File Browser usage before this patch.
Operators using the File Browser should generally use
`FILE_DEFAULTDISPLAY`/`FILE_SORT_DEFAULT` now, except if they have a reason not
to. See comments at their definition.
----
This makes it so operators that set a different display or sort type
don't change the sort or display type for the next File Browser operation.
So using "Recover Auto Save" entirely isolates display and sort type from other
operations.
Differential Revision: https://developer.blender.org/D8598
Reviewed by: Bastien Montagne
|
|
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9349
|
|
When outliner datablocks are selected, switch to the corresponding tab
for that datablock in properties editors. Only properties editors
that share an edge with the outliner will change tabs.
Additionally, when modifiers, constraints, and shader effects are
selected from the outliner, the panel will be expanded in all properties
editors.
Part of T77408
Manifest Task: https://developer.blender.org/T63991
Differential Revision: https://developer.blender.org/D8638
|
|
Follow our code style for doxygen sections.
|
|
Approximately 141 changes of capitalization to conform to MLA title style.
Differential Revision: https://developer.blender.org/D8392
Reviewed by Julian Eisel
|
|
This regression was caused by rB57de5686048f which disabled srgb
transform after the python callback.
The right thing to do is to only rebind the framebuffer once to
reset the no-srgb override.
|
|
This means if a keymap item is set to ignore repeat events,
it may do so accidentally from this setting being copied.
|
|
|
|
|
|
rB78a5895c96 introduced a "use after scope" warning, where a buffer
from a lower scope was used later. The solution is to only use one
variable and store whether to use it more explicitely with a bool.
|
|
Also return early and use LISTBASE_FOREACH in a few places
|
|
|
|
This patch implements panel expansion saving and resetting for property
search. While search is active, the panel expansion is based on whether
or not it has a search result. When the search finishes, the panel
expansion returns to its state before the search started. However, any
panels interacted with during the search won't reset their expansion.
This requires adding a new runtime flag for panels to store whether to
use search result status as expansion. It also requires better handling
for animation when panel expansion changes with another new runtime flag.
`UI_panel_is_closed` gets the search-dependent expansion, but it is
intentionally not used to access expansion in every case-- sometimes it's
necessary to use `PNL_CLOSED` directly.
Differential Revision: https://developer.blender.org/D8984
|
|
Reviewed By: Sybren, Luciano Muñoz Sessarego
Differential Revision: https://developer.blender.org/D7783
|
|
Split up `ANIM_deselect_anim_channels()` into
`ANIM_anim_channels_select_set()` and
`ANIM_anim_channels_select_toggle()`.
`ANIM_anim_channels_select_set()` is equivalent to the old
`ANIM_deselect_anim_channels(..., false, ACHANNEL_SETFLAG_xxx)`.
`ANIM_anim_channels_select_toggle()` is equivalent to the old
`ANIM_deselect_anim_channels(..., true, ACHANNEL_SETFLAG_ADD)`.
`ANIM_deselect_anim_channels(..., true, ACHANNEL_SETFLAG_CLEAR)` was
also called once. The `true` parameter suggested the "toggle" behaviour
was intended, but the `ACHANNEL_SETFLAG_CLEAR` argument prevented any
toggling. This is now replaced with `ANIM_anim_channels_select_set(ac,
ACHANNEL_SETFLAG_CLEAR)` to make this explicit.
No functional changes, just a cleanup in order to better understand how
the selection works.
|
|
This was caused by the sequencer using a sRGB buffer without using
the sRGB transform.
This patch make it so that the framebuffer is rebound using the
sRGB transform before the python draw callbacks.
|
|
|
|
This patch enables property search for all tabs in the property editor.
To make interaction faster, if the editor's current tab doesn't have a
result, the current tab changes to the next tab that has a match.
This patch implements basic code that only searches panels.
While we could run the existing "single tab" property search for every
tab, that would also do everything else related to the layout pass,
which would be less efficient, and maybe more complicated to maintain.
The search match status for every current tab of the property editor is
stored in a runtime bitfield and them displayed later by dimming icons
in the tab selector panel to the left. Using `BLI_bitmap` properly in
the runtime struct required moving it to `buttons_intern.h` and
adding a small API to access the search filter instead.
To make sure the editor isn't influenced by anything that happens while
building the layout for other tabs, most of the context is duplicated
and the new search is run in the duplicated editor.
Note that the tool settings tab works slightly different than the other
tabs, so I've disabled searching it for this commit. That would be a
relatively simple improvement, but would just require a bit of
refactoring of existing code.
Differential Revision: https://developer.blender.org/D8859
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
The settings in these popups are not animateable, so also turn off
property decorate. And also use better widths in order to fit the
full text.
Differential Revision: https://developer.blender.org/D9060
|
|
This is first step of refactoring task T77580.
Next step will be breaking up files into smaller ones.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D8492
|
|
If current frame is set to before start frame, with AV sync there is
delay when playback is started.
Tag scene with ID_RECALC_AUDIO_SEEK, so audio playback starts from
correct position.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8809
|
|
This commit makes the panel expansion set based on the search results
when the active tab in the properties editor changes. The multi-tab
search patch (D8859) actually doesn't handle this because it uses a
different code path.
This feature uncovered a subtle but fairly significant issue with the
implementation of property search (More details in T81113). Basically,
the search needed multiple redraws to properly display the expansion of
panels based on the search results. Because there is no animation of
panel expansion when switching tabs, the problem was exposed only now.
With this commit, hiding of "search only" buttons and panel size
calculation happens in a single final step of the panel layout pass.
The "search only" layout root flag is removed. Instead every button
inside a panel header is in a single "uiButtonGroup" marked with a
specific "in header" flag, an idea which could be generalized in the
future.
Differential Revision: https://developer.blender.org/D9006
|
|
int and eContextResult are different types to MSVC
leading to a function signature mismatch.
|
|
Define enum `eContextResult` and use its values for returns, instead of
just returning 1, 0, or -1 (and always having some comment that explains
what -1 means).
This also cleans up the mixup between returning `0` and `false`, and `1`
and `true`. An inconsistency was discovered during this cleanup, and
marked with `TODO(sybren)`. It's not fixed here, as it would consititute
a functional change.
The enum isn't used everywhere, as enums in C and C++ can have different
storage sizes. To prevent issues, callback functions are still declared
as returning`int`. To at least make things easier to understand for
humans, I marked those with `int /*eContextResult*/`.
This is a followup of D9090, and is intended to unify how context
callbacks return values. This will make it easier to extend the approach
in D9090 to those functions.
No functional changes.
Differential Revision: https://developer.blender.org/D9095
|
|
Refactor `ed_screen_context()` to use `GHash` lookups instead of a
sequence of string comparisons. This should provide a nice speedup,
given that the hash for `member` only has to be computed once instead of
matching it to each possible string.
Reviwed by: brecht
Differential Revision: https://developer.blender.org/D9090
|
|
Refactor `ed_screen_context()` to call separate functions, instead of
having the entire functionality in one function. Each function now only
retrieves the data it needs from the context. Furthermore, some string
comparisons are removed.
No functional changes.
Reviwed by: brecht
Differential Revision: https://developer.blender.org/D9090
|
|
.blend file.
Relying on pointer addresses across different data-blocks is extremely
not recommended (and should be strictly forbidden ideally), in
particular in direct_link step of blend file reading.
- It assumes a specific order in reading of data, which is not ensured
in future, and is in any case a very bad, non explicit, hidden
dependency on behaviors of other parts of the codebase.
- It is intrinsically unsafe (as in, it makes writing bad code and making
mistakes easy, see e.g. fix in rB84b3f6e049b35f9).
- It makes advanced handling of data-blocks harder (thinking about
partial undo code e.g., even though in this specific case it was not
an issue as we do not re-read neither windowmanagers nor worspaces
during undo).
New code uses windows' `winid` instead as 'anchor' to find again proper
workspace hook in windows at read time.
As a bonus, it will also cleanup the list of relations from any invalid
ones (afaict it was never done previously).
Differential Revision: https://developer.blender.org/D9073
|
|
Cleanup old tracker task format to the new. e.g: [#34039] to T34039
Ref D8718
|
|
In the 3D view sidebar, the active tool settings panel can be pinned to other
categories, and in those other categories it doesn't redraw when the active
tool changes. This commit checks for pinned panels from the "Tool" category
when checking whether to redraw.
Note that the relatively expensive string comparison is only done for
currently visible pinned panels.
Differential Revision: https://developer.blender.org/D9012
|
|
Since the search is applied all in one phase, there is no need to store
a reference to the search filter in every uiBlock. Instead just pass it
as an argument to UI_block_apply_search_filter.
|
|
While this isn't an issue with the default configuration it's possible
to register extra header types for a single region.
In this case the first header-type to successfully poll is drawn
without drawing other header types.
This issue was raised by T60195.
|
|
This commit makes grid theming more consistent and capable by adding
some new theme colors related to grid rendering.
- Add grid theme color for node editor. `UI_view2d_multi_grid_draw`
is called with TH_GRID instead of a shaded `TH_BACK`.
Also color-blend `TH_NODE_GROUP`.
- Make the movie clip editor's clip preview grid respect grid theme
color (`ED_region_grid_draw` uses color-blended `TH_GRID`).
- Add versioning code to allow fixing existing themes (the resulting
themes should visually look the same as before)
These changes did cause some inconsistencies in the movie clip editor,
even after adjusting the themes accordingly:
1. The alpha slider of the grid color affects the background and not
the grid lines themselves.
2. The grids used by graph and dopesheet mode could already be themed
in the past. Now that the clip preview's grid can also be themed,
two different modes share the same theme color.
Differential Revision: https://developer.blender.org/D8699
|
|
Stack panels (for modifiers, etc..) also get their expansion from their
associated list data. This means that property search expansion needs
to properly update the list data, which can be accomplished by calling
`set_panels_list_data_expand_flag`.
This commit also moves this logic to `UI_panels_end`, where it fits
better.
|
|
This adds a search bar to the properties editor. The full search for
every tab isn't included in this patch, but the interaction with
panels, searching behavior, UI, region level, and DNA changes are
included here.
The block-level search works by iterating over the block's button
groups and checking whether they match the search. If they do, they
are tagged with a flag, and the block's panel is tagged too. For
every update (text edit), the panel's expansion is set to whether
the panel has a result or not. The search also checks for matching
strings inside enums and in panel labels.
One complication to this that isn't immediately apparent is that
closed panel's subpanels have to be searched too. This adds some
complexity to the area-level panel layout code.
Possible Future Improvements:
- Use the new fuzzy search in BLI
- Reset panels to their expansion before the search started if
the user escape out of the text box.
- Open all child panels of a panel with expansion.
Differential Revision: https://developer.blender.org/D8856
|
