| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/sculpt_paint` module.
No functional changes.
|
|
|
|
|
|
When projection painting a dense mesh a face can be marked
PROJ_FACE_DEGENERATE when it is too small. Degenerative faces are
handled differently and as documented can create incorrect results.
Not sure what these incorrect results are and if there could be a better
solution for handling these results.
This fix would only mark a face degenerative when all the verts are the
same.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D7662
|
|
This patch enables TBB as the default task scheduler. TBB stands for Threading Building Blocks and is developed by Intel. The library contains several threading patters. This patch maps blenders BLI_task_* function to their counterpart. After this patch we can add more patterns. A promising one is TBB:graph that can be used for depsgraph, draw manager and compositor.
Performance changes depends on the actual hardware. It was tested on different hardwares from laptops to workstations and we didn't detected any downgrade of the performance.
* Linux Xeon E5-2699 v4 got FPS boost from 12 to 17 using Spring's 04_010_A.anim.blend.
* AMD Ryzen Threadripper 2990WX 32-Core Animation playback goes from 9.5-10.5 FPS to 13.0-14.0 FPS on Agent 327 , 10_03_B.anim.blend.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D7475
|
|
Tasks: move priority from task to task pool {rBf7c18df4f599fe39ffc914e645e504fcdbee8636}
Tasks: split task.c into task_pool.cc and task_iterator.c {rB4ada1d267749931ca934a74b14a82479bcaa92e0}
Differential Revision: https://developer.blender.org/D7385
|
|
Follow up of b2ee1770d4c3 and 10c2254d412d, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
|
|
Issues exposed by 'bl_run_operators.py' utility.
|
|
|
|
Caused by the introduction of UDIM (rBc30d6571bb47).
We need to make sure the tiles ImageUser is set up correctly [especially
the framenr], otherwise BKE_image_acquire_ibuf() and friends will fail
to find the correct ImBuf.
Also instead of initializing a minimal BKE_imageuser_default, now use
an appropriate ImageUser if avaliable and pass this around (instead of
just the tile_number). 2D painting can reuse the Image Editor ImageUser,
for 3D painting we still rely on a default ImageUser in most places, but
at least set the framenr correctly].
This also fixes crashes when doing image operations such as inverting or
resizing on images in a sequence in the Image Editor.
This also fixes color sampling (S) from the 3DView going wrong for image
sequences (would fallback to OpenGL sampling because an ImBuf could not
be found).
Maniphest Tasks: T74425
Differential Revision: https://developer.blender.org/D7022
|
|
While it might be handy to have type-less functionality which is
similar to how C++ math is implemented it can not be easily achieved
with just preprocessor in a way which does not have side-effects on
wrong usage.
There macros where often used on a non-trivial expression, and there
was at least one usage where it was causing an actual side effect/bug
on Windows (see change around square_f(sh[index++]) in studiolight.c).
For such cases it is handy to have a function which is guaranteed to
have zero side-effects. The motivation behind actually removing the
macros is that there is already a way to do similar calculation. Also,
not having such macros is a way to guarantee that its usage is not
changed in a way which have side-effects and that it's not used as an
inspiration for cases where it should not be used.
Differential Revision: https://developer.blender.org/D7051
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
Motivation the functions get 3 different kind of flag parameters (ImBuf,
DrawType, OffscreenRendering) the naming of the flags were not clear,
leading to mistakes and unnecessary time spend debugging.
|
|
|
|
Avoid accessing inline since it's often used multiple times.
In some cases it was already defined.
|
|
`invoke_props_dialog` and `invoke_popup` had a width and a height field. The height field was ignored as the height is determined based on the content. This change removes the field from the BPY + WM_api
Reviewed By: Campbell Barton, Jacques Lucke
Differential Revision: https://developer.blender.org/D6694
|
|
The code was using brush->alpha directly, so the alpha value from
UnifiedPaintSettings was not used when eneabled.
Reviewed By: brecht
Maniphest Tasks: T73656
Differential Revision: https://developer.blender.org/D6804
|
|
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6788
|
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
Old Name New Name
========= =========
init_def_material BKE_materials_init
BKE_material_gpencil_default_free BKE_materials_exit
test_object_materials BKE_object_materials_test
test_all_objects_materials BKE_objects_materials_test_all
give_matarar BKE_object_material_array
give_totcolp BKE_object_material_num
give_current_material_p BKE_object_material_get_p
give_current_material BKE_object_material_get
assign_material BKE_object_material_assign
assign_matarar BKE_object_material_array_assign
give_matarar_id BKE_id_material_array
give_totcolp_id BKE_id_material_num
assign_material_id BKE_id_material_assign
clear_matcopybuf BKE_material_copybuf_clear
free_matcopybuf BKE_material_copybuf_free
copy_matcopybuf BKE_material_copybuf_copy
paste_matcopybuf BKE_material_copybuf_paste
BKE_material_init_gpencil_settings BKE_gpencil_material_attr_init
BKE_material_add_gpencil BKE_gpencil_material_add
BKE_material_gpencil_get BKE_gpencil_material
BKE_material_gpencil_default_get BKE_gpencil_material_default
BKE_material_gpencil_settings_get BKE_gpencil_material_settings
|
|
The UDIM commit accidentally removed the check for whether an ImBuf exists
before trying to paint on it.
|
|
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
|
|
Viewport: Disable Clipping For EEVEE and External Renderers
Currently it is possible that, when using viewport clipping, the display and tools communicate
different information to the user then the renderer does. The reason is
that the renderer does not support viewport clipping. Both EEVEE and
Cycles do not support it.
This patch will disable the clipping in all the tools and drawing code
when the viewport drawing mode is `Material Preview` or `Rendered`.
This patch introduces a `RV3D_CLIPPING_ENABLED` util that checks if
clipping is enabled for the given `rv3d` and `v3d`. Also in places where
it was needed we added the `ViewContext` as a carrier for the `View3D`
and `RegionView3D`.
There are a few areas in the tooling (select, projection painting) that
still needs to be tackled after this patch.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6047
|
|
Multisample buffers were used for smooth line drawing. As we now have
an algorithm that doesn't need the multisample buffers we can remove
them.
The user preference for viewport multi_sampling is replaced by single
toggle overlay `use_overlay_smooth_wire`. By default this setting is
enabled as the new drawing is really quick (<1ms) and uses zero hacks.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6367
|
|
Also correct some outdated symbol references,
add missing 'name' commands.
|
|
|
|
Masks are now temporary, not part of the persistent undo tiles.
Now they're always freed after the stroke.
|
|
Clearer because they're no longer the same as undo tiles.
|
|
|
|
|
|
|
|
|
|
The "alpha lock" check was missing for the smear and soften brush.
Added checks to make sure that the alpha values are kept the same.
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D5416
|
|
T68035 by @luzpaz
|
|
This change ensures that operators which needs access to evaluated data
first makes sure there is a dependency graph.
Other accesses to the dependency graph made it more explicit about
whether they just need a valid dependency graph pointer or whether they
expect the graph to be already evaluated.
This replaces OPTYPE_USE_EVAL_DATA which is now removed.
Some general rules about usage of accessors:
- Drawing is expected to happen from a fully evaluated dependency graph.
There is now a function to access it, which will in the future control
that dependency graph is actually evaluated.
This check is not yet done because there are some things to be taken
care about first: for example, post-update hooks might leave scene in
a state where something is still tagged for update.
- All operators which needs to access evaluated state must use
CTX_data_ensure_evaluated_depsgraph().
This function replaces OPTYPE_USE_EVAL_DATA.
The call is generally to be done in the very beginning of the
operator, prior other logic (unless this is some comprehensive
operator which might or might not need access to an evaluated state).
This call is never to be used from a loop.
If some utility function requires evaluated state of dependency graph
the graph is to be passed as an explicit argument. This way it is
clear that no evaluation happens in a loop or something like this.
- All cases which needs to know dependency graph pointer, but which
doesn't want to actually evaluate it can use old-style function
CTX_data_depsgraph_pointer(), assuming that underlying code will
ensure dependency graph is evaluated prior to accessing it.
- The new functions are replacing OPTYPE_USE_EVAL_DATA, so now it is
explicit and local about where dependency graph is being ensured.
This commit also contains some fixes of wrong usage of evaluation
functions on original objects. Ideally should be split out, but in
reality with all the APIs being renamed is quite tricky.
Fixes T67454: Blender crash on rapid undo and select
Speculation here is that sometimes undo and selection operators are
sometimes handled in the same event loop iteration, which leaves
non-evaluated dependency graph.
Fixes T67973: Crash on Fix Deforms operator
Fixes T67902: Crash when undo a loop cut
Reviewers: brecht
Reviewed By: brecht
Subscribers: lichtwerk
Maniphest Tasks: T67454
Differential Revision: https://developer.blender.org/D5343
|
|
Differential Revision: https://developer.blender.org/D3744
|
|
While speedup is hard to detect (highly fluctuent), it seems to be
around 5% on average on my 8 threads machine...
It also remove usage of a 'global' thread lock, which is always good.
Note that I also tried to use proper foreach threaded iterator construct
(see D5372), but that proved to be relatively slower (presumably due to
the very high dissymmetry between tasks, usually during a paint stroke
only a few chunks will require most of the computing effort, overhead of
threaded foreach management is then noticeable).
This concludes (for now) the work on
T51133 Bad performance with texture painting depending on multi-thread settings.
|
|
Reviewers: sergey
Maniphest Tasks: T67860
Differential Revision: https://developer.blender.org/D5360
|
|
|
|
|
|
Disable all overlays except the texture paint overlay. Add alpha to the
resulting image buffer.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4974
|
|
|
|
|
|
settings.
This is more of a temp urgent hack than a proper fix, chenages required
for the later are too involved for 2.80 at that point of time and will
be done later.
That commit merely keeps the whole existing logic for 3D painting
textures, but instead of re-creating a pool of threads for *every* (!)
stroke evaluation (i.e. mouse move event during painting), we instead
use Blender's task scheduler.
That remains sub-optimal, there are likely more improvements possible in
that code, but it should address the main issue reported (which is
presumably caused by windows thread launching being rather heavy process).
|
|
When rendering viewport to an offscreen buffer the buffer was
constructed for non anti aliasing (0 samples). This made the objects
that are drawn by the `object_mode` including `wireframe` draw type
non-anti-aliased.
The offscreen buffers will be constructed based on the user setting for
viewport multisampling (`U.ogl_multisamples`). The same setting will
also be used when previewing scene strips in the sequencer. For now
this only improves wireframe drawing in the scene strips. To improve the
Anti aliasing in the scene strips we need to get finer control in the
draw manager. This will be part of a different patch I am preparing.
Please note that this patch also cleansup some unused code in the offscreen rendering (FSAA code was still existing, but never called)
Reviewed By: brecht
Maniphest Tasks: T64849
Differential Revision: https://developer.blender.org/D4907
|
|
|
|
Cycles now uses the color space on the image datablock, and uses OpenColorIO
to convert to scene linear as needed. Byte images do not take extra memory,
they are compressed in scene linear + sRGB transfer function which in common
cases is a no-op.
Eevee and workbench were changed to work similar. Float images are stored as
scene linear. Byte images are compressed as scene linear + sRGB and stored in
a GL_SRGB8_ALPHA8 texture. From the GLSL shader side this means they are read
as scene linear, simplifying the code and taking advantage of hardware support.
Further, OpenGL image textures are now all stored with premultiplied alpha.
Eevee texture sampling looks a little different now because interpolation
happens premultiplied and in scene linear space.
Overlays and grease pencil work in sRGB space so those now have an extra
conversion to sRGB after reading from image textures. This is not particularly
elegant but as long as engines use different conventions, one or the other
needs to do conversion.
This change breaks compatibility for cases where multiple image texture nodes
were using the same image with different color space node settings. However it
gives more predictable behavior for baking and texture painting if save, load
and image editing operations have a single color space to handle.
Differential Revision: https://developer.blender.org/D4807
|
|
Quiet extra-semi-stmt & missing-variable-declarations
|
