| Age | Commit message (Collapse) | Author |
|---|
|
Blank brush strokes never have an oppurtunity to initialize
a sculpt undo step, which results in blank global undo steps.
These confuse DynTopo's internal BMLog undo stack.
Note: I tried having the stroke operator return OPERATOR_CANCELLED,
but this didn't prevent the undo push (which is done automatically
due to the presence of OPTYPE_UNDO in the operator flags).
I might investigate removing the flag, but that might cause other
problems.
|
|
The stroke code now supports raycasting the original mesh.
This fixes anchored mode not working for negative brushes,
which might move the mesh out of the initial mouse cursor
position.
|
|
In some cases it is mandatory to be able to hide parts of the mesh
in order to paint certain areas. The Mask modifier doesn't work in
weight paint, and edit mode hiding requires using selection, which
is not always convenient.
This makes the weight and vertex paint modes always respect edit mode
hiding like sculpt mode. The change in behavior affects drawing and
building paint PBVH. Thus it affects brushes, but not menu operators
like Smooth or Normalize.
In addition, this makes the Alt-H shortcut available even without
any selection enabled, and implements Hide for vertex selection.
Differential Revision: https://developer.blender.org/D14163
|
|
All of the operators in vertex paint mode didn't work properly with
the new color attribute system. They only worked on byte color type
attributes on the face corner domain.
Since there are four possible combinations of domains and types now,
it mostly ended up being simpler to convert the code to C++ and use
the geometry component API for retrieving attributes, interpolating
between domains, etc. The code changes ended up being fairly large,
but the result should be simpler now.
Differential Revision: https://developer.blender.org/D15261
|
|
This patch fixes T90120. The fundamental problem is that 2d and the old 3d paint modes share a single Paint struct, ToolSettings->imapaint. This patch is a temporary fix until the new 3d paint mode (which has its own Paint struct) is released.
The patch works by listening for `NC_SCENE|ND_MODE` inside `image_listener` in `space_image.c`. It does not use `ED_space_image_paint_update` since that requires a `bMain.` Instead it calls `paint_cursor_start` (which is promoted to `ED_paint_cursor_start`). `image_paint_poll` is also promoted to an `ED_` function.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D14946
Ref D14946
|
|
|
|
- Verrtex paint mode has been refactored into C++ templates.
It now works with both byte and float colors and point
& corner attribute domains.
- There is a new API for mixing colors (also based
on C++ templates). Unlike the existing APIs byte
and float colors are interpolated identically.
Interpolation does happen in a squared rgb space,
this may be changed in the future.
- Vertex paint now uses the sculpt undo system.
Reviewed By: Brecht Van Lommel.
Differential Revision: https://developer.blender.org/D14179
Ref D14179
|
|
Add blank lines after file references to avoid them being interpreted as
doc-strings the following declarations.
|
|
This was essentially double free due to a dangling pointer,
because `op->customdata` was not properly set to null after
the paint stroke was freed.
|
|
For an upcoming prototype we would introduced a new eTexPaintMode
option. That would add more cases and if statements. This change migrate
the eTexPaintMode to 3 classes. AbstractPaintMode contains a shared interface.
ImagePaintMode for 2d painting and ProjectionPaintMode for 3d painting.
|
|
This allows accessing properties of the operator that the
stroke belongs to.
|
|
Previously, all operators using `PaintStroke` would have to store
the stroke in `op->customdata`. That made it impossible to store
other operator specific data in `op->customdata` that was unrelated
to the stroke.
This patch changes it so that the `PaintStroke` is passed to api
functions as a separate argument, which allows storing the stroke
as a subfield of some other struct in `op->customdata`.
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
MSVC used to warn about const mismatch for arguments passed by value.
Remove these as newer versions of MSVC no longer show this warning.
|
|
|
|
Sculpt.c is now three files:
* Sculpt.c: main API methods and the brush stroke operator
* Sculpt_brushes.c: Code for individual brushes.
* Sculpt_ops.c: Sculpt operators other than the brush stroke operator.
TODO: split brush stroke operator into a new file (sculpt_stroke.c?).
|
|
Ref T92709
|
|
Dirty regions when painting are not using rcti. Meaning less
understandable code. Found issue when refactoring the image_gpu partial
update. In a future change gpu partial update API will be using rcti
also what makes the code even cleaner.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D13260
|
|
|
|
This patch separates the static-part from the dynamic-part when
generate brush masks. This makes the generation of brush masks 2-5 times
faster depending on the size of the brush.
More improvements can be done, this was just low hanging fruit.
|
|
Curve mask generation is done during 2d texture painting. There are some
performance issues in this part of the code. Before addressing those we
move the code to CPP.
|
|
Some warnings remain that require larger changes.
|
|
When using a tool that is not a brush, the previously used brush
preset will still be active in the tool settings, so the cursor will
draw its custom reviews.
This checks if the current active tool is a brush before drawing its
previews. If it is not a brush tools, it draws a default white cursor.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9418
|
|
|
|
This adds support for line gesture to SculptGestureContext and
implements a Mask Line tool, which affects everything to the right of a plane
defined by the straightline gesture.
For this to work, a new WM_gesture_straightline_oneshot_modal is needed
which only runs exec when the gesture is over.
Added as experimental as it does not have icon.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D8722
|
|
No functional changes
|
|
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
Box mask is not a selection, so it should not be part of the select
operator. This allows to add more sculpt mode specific functionality and
properties and to share more code with the lasso mask operator in a
later refactor.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8456
|
|
Mix up with imapaint.paintcursor & imapaint.paint.paint_cursor
Remove imapaint.paintcursor since it wasn't used.
Also rename paint_cursor_start_explicit() to paint_cursor_start(),
removing the existing paint_cursor_start() since it took the paint
struct from the context, a value that's known by all callers.
|
|
This caused an additional argument when exiting object modes
and many other low level functions which don't need to access context.
This simplifies fixing T77073.
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
|
|
This commits introduces the pose_ik_segments brush property in the Pose Brush. When increasing the IK segments count, the brush generates more segments and weights associations following the topology of the mesh. When moving the brush, these segments are transformed using an IK solver and they are used to deform the mesh.
When pressing Ctrl, the brush controls the segments' roll rotation instead of using the IK solver. The brush falloff controls how much rotation is propagated from the first to the last segment in the chain.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6389
|
|
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
|
|
Also fix CTX_wm_region_view3d which didn't check the region type.
|
|
|
|
This isn't just used for painting.
|
|
Not all the necessary state got restored.
|
|
|
|
|
|
In 2.7x UV sculpt was a kind of sub-mode
(a toggle with it's own key-map & drawing code).
Move this to an operator that uses the tool-system,
this simplifies internal logic, especially brush selection
which now matches sculpt and other paint modes.
- Remove toggle used to enable uv sculpt.
- Expose the brush, which was already used but there was no way to
select different brushes.
- Make UV sculpt use paint paint tool slots
(using brushes how all other paint mode currently do).
- Move UV Sculpt keymap to the tools keymap.
- Remove Q to toggle UV sculpt mode,
S/P/G keys to switch tools.
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
Reviewers: brecht
Maniphest Tasks: T62359
Differential Revision: https://developer.blender.org/D4486
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
Needed for clan-format not to wrap onto one line.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Done using:
source/tools/utils_maintenance/c_sort_blocks.py
|
